9. Troubleshooting
Removing Punch Waste
When the "Empty Punch Receptacle" message appears, you cannot use the Punch function.
Finisher SR841
The following procedure explains how to remove punch wastes from the Finisher SR841.
1.
Open the finisher's front cover.
2.
Pull out the punch waste box carefully, and then remove punch waste.
9
3.
Reinstall the punch waste box.
If you do not, the "Empty Punch Receptacle" message remains displayed.
4.
Close the finisher's front cover.
The "Empty Punch Receptacle" message disappears.
• If the message remains displayed, reinstall the punch waste box.
124
AST127S
AST128S