Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual page 47

[10Mbps Half
Router/HUB D.]
auto-negotia-
tion (auto se-
lection)
• Connection cannot be established if the Ethernet speed does not match your network's transmission
speed.
• The auto-negotiation mechanism allows two interfaces to automatically determine an optimum Eth-
ernet speed as soon as they are connected. We recommend you select [Auto Select].
1. Press the [Menu] key.
The menu appears on the display.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [
3. Press the [ ] or [ ] key to select [Network Setup], and then press the [
4. Press the [ ] or [ ] key to select [Ethernet Speed], and then press the [
Printer
[10Mbps Full [100Mbps
D.] Half D.]
-
AST008S
Ethernet Configuration
[100Mbps Full [Auto Select]
D.]
-
Enter] key.
Enter] key.
Enter] key.
4
45