Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual page 50

4. Configuration
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [
3. Press the [ ] or [ ] key to select [IEEE 802.11b], and then press the [
4. Press the [ ] or [ ] key to select [Comm. Mode], and then press the [
4
5. Press the [ ] or [ ] key to select the transmission mode of IEEE 802.11b, and then press the
[ Enter] key.
• The factory default is [802.11 Ad hoc].
• To use an IEEE 802.11b card for which the SSID (Network Name) setting is not necessary, select
[Ad hoc].
• The transmission mode of IEEE 802.11b can also be set using a Web browser. For details, see
Web browser, and "Configuring the Network Interface Board Using Web Browser", Software
Guide.
6. If [802.11 Ad hoc] or [Ad hoc] is selected for [Comm. Mode], set the channel to use for
transmission.
Consult your network administrator for the channel to use.
7. Press the [ ] or [ ] key to select [Channel], and then press the [
8. Press the [ ] or [ ] key to select the channel, and then press the [
9. Set [Trans. Speed] in the same way.
48
Enter] key.
Enter] key.
Enter] key.
Enter] key.
Enter] key.