4. Configuration
The menu appears on the display.
2.
Press the [ ] or [ ] key to select [Host Interface], and then press the [
4
3.
Press the [ ] or [ ] key to select [Network Setup], and then press the [
4.
Press the [ ] or [ ] key to select [Active Protocol], and then press the [
5.
Press the [ ] or [ ] key to select the network protocol, and then press the [
6.
Press the [ ] or [ ] key to select [Active] or [Not Active], and then press the [
Set other protocols you need to set in the same way.
• Select [Not Active] for unused protocols.
• Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5.
7.
Press the [Escape] key until the screen returns to the [Network Setup] menu.
40
AST008S
Enter] key.
Enter] key.
Enter] key.
Enter] key.
Enter] key.