Checking The Switches - MOTO GUZZI GRISO 1100 Manual

5
4
u Connect the positive terminal (+) by
means of the screw (2).
u Connect the negative terminal (–) by
means of the screw (3).
u Coat the terminals of cables and battery
with neutral grease or Vaseline.
u Tighten the screws (5) to secure the
retainer (4).
u Refit the rider seat, see page 25
(UNLOCKING/LOCKING THE SEAT).
CAUTION
R e m o v i n g t h e b a t t e r y r e s e t s t h e
following functions: digital clock, trip
info and lap times. To re-set these
f u n c t i o n s , s e e
(MULTIFUNCTION COMPUTER).
72 use and maintenance Griso
1

CHECKING THE SWITCHES

Carefully read p. 51 (MAINTENANCE).
The vehicle is provided with four
switches:
1) Stoplight switch on the rear brake
control lever;
2) Stoplight switch on the front brake
control lever;
3) Safety switch on the side stand;
4) Switch on the clutch control lever.
p a g e 1 5
2
3
u Make sure that there are no dirt or mud
deposits on the switch; the pin must be
able to move without interference,
returning automatically to its initial
position.
u Make sure that the cables are connected
correctly.
4