Removing The Battery - MOTO GUZZI GRISO 1100 Manual

If necessary:
u Remove the battery, see (REMOVING
THE BATTERY), in this page.
u Clean off cable and battery terminals
with a wire brush to remove all traces of
corrosion.
Install the battery, see
u
(INSTALLING THE BATTERY).
70 use and maintenance Griso

REMOVING THE BATTERY

R e m o v i n g t h e b a t t e r y r e s e t s t h e
following functions: digital clock, trip
info and lap times. To reset these
page 71
f u n c t i o n s ,
(MULTIFUNCTION COMPUTER).
Carefully read page 68 (BATTERY).
Make sure that the ignition switch is in
u
position "
u Remove the rider seat, see page 25
(UNLOCKING/LOCKING THE SEAT).
u Loosen the two screws (1) and move
aside the retainer (2).
1
2
CAUTION
s e e p a g e 1 5
".
5
7
6
u Release and remove the negative (-)
terminal screw (3).
u Move aside the negative cable (4).
u Release and remove the positive (+)
terminal screw (5).
u Move aside the positive cable (6).
u Grasp the battery (7) firmly and remove
it from its compartment, by raising it at
right angle from its housing.
WARNING
Once it has been removed, the battery
must be stored in a safe place and kept
away from children.
u Place the battery on a flat surface, in a
cool and dry place.
3
4