Multifunction Computer; Controls; Trip 1 And 2 - MOTO GUZZI GRISO 1100 Manual

B
1

MULTIFUNCTION COMPUTER

When you turn the ignition key to "
following instrument panel lights will turn
on for 2 seconds:
- the "GRISO" logo
- all warning lights
- backlighting
Rev counter index (1) moves to maximum
value, as set by the user.
After 2 seconds, all instruments will briefly
s h o w t h e c u r r e n t v a l u e s o f t h e
corresponding parameters.
The display shows the following standard
settings:
– speed (zone a)
– clock (zone B)
– odometer (zone C)
– ambient temperature (zone D)
– on-board computer and accessories
functions (zone E)
D
A
C
E

CONTROLS

", the 2) Switch with three positions: TRIP1 /
TRIP2 / MODE
3) SET button; briefly press it to scroll the
functions in the menus, press for
several seconds to confirm selected
option.
3
2
TRIP METER
TRIP TIME
FUEL CONSUMPTION
MAXIMUM SPEED
AVERAGE SPEED

TRIP 1 AND 2

In TRIP 1 and 2 the data concerning trip 1
and 2 are shown.
Indication of displayed trip meter is on the
right, at the bottom.
S e t s e l e c t o r ( 2 ) t o t h e p o s i t i o n
corresponding to TRIP configuration to be
displayed (TRIP 1 or TRIP 2).
At the bottom (F) are the following data:
– TRIP METER
– TRIP TIME
– FUEL CONSUMPTION
– MAXIMUM SPEED
– AVERAGE SPEED
Briefly press SET (3) to toggle between
these parameters. Press it for several
seconds to reset all data from selected
TRIP meter.
use and maintenance Griso 15