MOTO GUZZI GRISO 1100 Manual page 18

Back lighting
T h i s f u n c t i o n a l l o w s y o u t o s e t
backlighting: three levels are available.
From this function, every time the SET
button (3) is briefly pressed, the following
icons are alternately displayed:
– LOW
– MEAN
– HIGH
Press the SET button (3) for several
seconds to complete the operation; the
instrument panel sets back to SETTINGS
menu.
18 use and maintenance Griso
°C/°F
This function allows you to select the unit
of measurement for ambient temperature.
From this function, every time the SET
button (3) is briefly pressed, the following
two units of measurement are alternately
displayed:
°C
°F
Press the SET button (3) for several
seconds to store the data; the instrument
panel sets back to SETTINGS menu.
12H/24H
This function allows you to select the time
format. From this function, every time the
SET button (3) is briefly pressed, the
following formats are alternately displayed:
12H
24H
Press the SET button (3) for several
seconds to store the data; the instrument
panel sets back to SETTINGS menu.
Change the code
This function is used when the old code is
available and is to be changed.
Within this function, the following message
is displayed:
"INSERT THE OLD CODE"
As soon as the old code is acknowledged,
the new code is requested; the following
message is displayed:
"INSERT THE NEW CODE"
Once the operation is over, the display
goes back to DIAGNOSIS menu. If you
entered with the code, this operation will
not be allowed.
Once the operation is over, the instrument
panel goes back to SETTINGS menu.