MOTO GUZZI GRISO 1100 Manual page 44

5
u Completely pull the front brake lever.
u Completely pull the clutch lever (5) and
set the gear shift lever (9) to neutral
[green LED " " on].
N O T E
K e e p t h e c l u t c h l e v e r ( 5 )
completely pulled until the engine starts.
N O T E
I n c a s e o f l o w a m b i e n t
temperature (close to or lower than 0°C –
32 °F), see page 44 (STARTING THE
ENGINE FROM COLD).
u Press the starter button "
accelerate, and immediately release it,
the control unit will manage the starting
procedure on its own.
– The low beam comes on.
44 use and maintenance Griso
If the LED "
and the engine oil pressure icon "
on the display are still on, or come on
during engine normal operation, it
means that the oil pressure in the
circuit is low.
u Keep at least one brake lever pulled and
do not accelerate until you start.
6
Never move off abruptly with a cold
engine.
To reduce the emission of polluting
substances and the consumption of
fuel, warm the engine up by proceeding
at low speed for the first miles.
If the alarm LED "
SERVICE" diagnosis icon come on
during engine normal operation, it
m e a n s t h a t t h e c o n t r o l u n i t h a s
" (3), do not
detected a failure. In most cases, the
engine will keep running, although
giving less performance. Immediately
contact a Moto Guzzi Authorised
Dealer.
CAUTION
" on the instrument panel
"
CAUTION
CAUTION
" and the "
! !
STARTING THE ENGINE FROM COLD
The vehicle is fitted with an automatic cold
start device and does not require any
precaution for cold starting.
In case of low ambient temperature (close
to or lower than 0°C / 32°F), the automatic
cold start switches on and increases the
r p m un t i l r ea c hi n g o p t i m u m e n g in e
t e m p e r a t u r e a n d s w i t c h e s
automatically.
CAUTION
The automatic cold start can not be
manually operated.
o f f