Removing The Battery - MOTO GUZZI Griso Use And Maintenance Book

u Make sure that the cable terminals and
the battery terminals are:
– in good condition (and not corroded or
covered with deposits);
– covered with neutral grease or Vaseline.
90 use and maintenance Griso
If necessary:
Remove the battery, see (REMOVING
u
THE BATTERY), in this page.
u Clean off cable and battery terminals
with a wire brush to remove all traces of
corrosion.
Install the battery, see
u
(INSTALLING THE BATTERY).

REMOVING THE BATTERY

R e m o v i n g t h e b a t t e r y r e s e t s t h e
following functions: digital clock, trip
info and lap times. To reset these
page 92
f u n c t i o n s ,
(MULTIFUNCTION COMPUTER).
Carefully read page 89 (BATTERY).
Make sure that the ignition switch is in
u
position "
u Remove the rider seat, see page 43
(UNLOCKING/LOCKING THE SEAT).
u Loosen the two screws (1) and move
aside the cover (2).
1
2
CAUTION
s e e p a g e 3 3
".