Base Station With Telephone Answering Machine(Tam)Control; 3.4 Base Two Digit-Led Display Information; Base Station Overview - iDect Link Plus Single User Manual

3.3 Base Station with Telephone Answering Machine (TAM) Control
REPEAT
Press to repeat playing the current
message from the beginning.
Press twice to skip back to the
previous message.
1
Press to increase
playback Volume.
Press to decrease
the playback Volume.

3.4 Base Two Digit-LED Display Information

0F-> -- Displayed when the answering machine is turned OFF
Displayed when the answering machine is turned ON where
0n-> XX
XX is number of messages in TAM memory.
00 Steady ON: No voice messages in the TAM.
Flashing: There are XX new messages recorded where XX is
XX
from 01 to 59.
ZZ Steady ON: There are ZZ old messages in the TAM memory
and no new messages.
Flashing XX alternately with FF: There are XX new voice
XX/FF
messages recorded and the TAM memory is full.
PLAY/STOP
Press to play
messages
Press to stop the
message playback
2
BLUETOOTH LEDs
Steady ON: Bluetooth device
is paired to the base.
Flashes: Bluetooth device is
in pairing set-up mode.
Off: If Bluetooth device is
disconnected.
9
SKIP
Press to skip the
current message
and play the next
message
FIND
Press to page your
registered handset(s).
Press and hold to start
the registration process.
ANSWER ON/OFF
Press to turn on the
answering machine.
Press again to turn off
the answering machine.
DELETE
Press once to delete the
message during playback
In idle mode, press
and hold to delete
all the old messages