(8)
Loosen a screw and remove the Fixing PCB ASSY.
(9)
Release the left hook and take off the Paper delivery actuator.
Paper delivery
actuator
(10)
1) Remove the retaining rings (on both sides).
2) Remove the HR gear, loosen the screw and remove the spring washer, remove
the left and right HR bearings and the heat roller by sliding it.
Screw
Retaining
ring
HR bearing
Screw
Figure 4.53
Figure 4.54
Spring washer
Heat roller
HR bearing
Figure 4.55
IV-26
Connector (2P)
Fixing PCB ASSY
Thermistor
Fixing unit cover
HR gear
Retaining ring