(2)
Remove the Paper hold front and the Paper hold rear by pushing the top of the
Paper hold front and sliding it down.
Paper hold front
Screws
Paper hold rear
(3)
Release the left cartridge hold roller and remove the cartridge guide L (by
loosening the screw and releasing the hook) then pull out feed flat cable 20P.
Cartridge hold roller
Feed flat cable 20P
Cartridge guide L
(4)
Remove the Paper feed chassis unit.
Figure 4.24
Figure 4.25
Figure 4.26
IV-14
Screws
Hook (the rear side)
Screw
Paper feed chassis unit