Brother HL 2060 - B/W Laser Printer Service Manual page 134

A5 FEED SETTING
JAM RECOVER MODE
NV-RAM CLEAR
TEST MENU
BUZZER SETTING
PARTS LIFE
A5 FEED=PORT
A5 FEED=LAND
JAM RECOVER=ON
JAM RECOVER=OFF
LINE TEST
ENGINE TEST
TONER EMPTY TEST
SENSOR TEST
exit ENGINE TEST
SINGLE TESTPRINT
REPEAT TESTPRINT
DRAM CHECK START
FLASH CARD CHECK
FLASH CARD CHK2
exit TEST MENU
BUZZER =OFF
BUZZER =ON
PART 100K=0K
PART 100K=RESET
VII-20
A5 paper size in portrate can be
printed. To protect the fixing unit
from overheat, printing speed will
slow down.
This is chosen by default.
A5 paper size in landscape can be
printed. Printing speed will be
maintained as A5 paper width in
landscape is the same as A4
paper widht in portrate.
For faster print after paper jam
occurs. It is very depending on
memory status.
This is chosen by default.
Clear NV-RAM
Page counter cannot be cleared
without a password.
This is chosen by default.
Display the number of the life
counter for the periodical
replacement parts with 100,000
pages life. See page V-1.
Reset the life counter for the
periodical replacement parts with
100,000 pages life.