Brother HL 2060 - B/W Laser Printer Service Manual page 123

PAPER&TRAY SIZE
PARALLEL MENU
RS-232C MENU
FX/XL SCALE ITA
ITA = OBLIQUE
ITA = ITALIC SEL
exit FONT
DEF PAPER=LT
DEF PAPER=A4
PARALLEL TIMING
CDCC PSW=L
CDCC PSW=H
STB/ACK DELAY
CDCC BSSL=H
CDCC BSSL=L
INPUT PRIME
INPUT PRIME =OFF
INPUT PRIME =ON
exit PARALLEL
DSR(DR) ON/OFF
DSR(DR) =OFF
VII-9
Settings for the scalable italic fonts
in EPSON, IBM emulation.
Make uplight font oblique to have
italic as scalable font is selected.
Use the italic font to have italic as
scalable font is selected.
Printers to be shipped to USA and
Canada have the Letter size
setting by default.
Printers to be shipped to the other
area than USA and Canada have
the A4 size setting by default.
BUSY signal gets high when
STROBE signal goes down (low).
BUSY signal gets high when
STROBE signal goes up.
This is chosen by default.
ACK signal is sent out when BUSY
signal goes down.
ACK signal is sent out before
BUSY signal goes down.
This is chosen by default.
Not reset a printer upon INPUT
PRIME signal.
This is chosen by default.
Reset a printer upon INPUT
PRIME signal.
Not check DSR(DR) signal when a
printer send back data to a host
throgh RS-232C.
This is chosen by default.