1.11
Cartridge Stopper ASSY
(1)
Remove LSR harness 5P, the Paper eject sensor harness and DC fan motor
harness from the cable clump.
(2)
Remove the Duct by releasing the 2 hooks.
(3)
Remove 3 M holders by loosening the screws.
M holder
(4)
Remove the screw for the Laser fan motor and remove it.
(5)
Remove the Laser flat cable form the ferrite core.
(6)
Loosen 4 screws and remove the Laser unit mount plate in the direction of the
arrow (the Ground leaf spring is also released at the same time.)
< Rear >
LSR harness
5P
< Left side >
Duct
Figure 4.20
Ground leaf spring
Laser unit mount plate
Figure 4.21
M holder
Cartridge stopper ASSY
IV-12
Screws
< Right side >
< Front >