Brother HL 2060 - B/W Laser Printer Service Manual page 121

NV-RAM CLEAR
READOUT SELECT
FONT SELECT
MODE=ON/OFF
MODE=ALWAYS ON
exit
(No display reads)
READOUT=ON
READOUT=OUT
IBM CHR SET MODE
IBM E1H = Beta
IBM E1H = Esszet
W BOLD ON/OFF
W BOLD = OFF
W BOLD = ON
DLFNT Bd/It
DLFNT Bd/It = YES
DLFNT Bd/It = NO
B PROD ON/OFF
B PROD = ON
B PROD = OFF
VII-7
The poser save mode works.
This is chosen by default.
The printer does not enter to the
power save mode.
Clear NV-RAM.
*Page counter cannot be cleared.*
When receiving DC3 in Epson
emulation, ignore the data received
before DC1.
Not ignore the data even DC3 is
received.
Selection for a reprint chara. and
download font creation.
Place "Beta" on E1h of IBM chara.
set.
Place "Esszet" on E1h of IBM
chara. set.
Effective setting in EPSON, IBM
emulation.
Not make a reprinted chara. bold.
Make a reprinted chara. bold.
(Print speed would get slow.)
Create bold & italic font from
download fonts.
Not create bold & italic font from
download fonts.
Create bold & italic font from
bitmap fonts.
Not create bold & italic font from
bitmap fonts.