Brother HL 2060 - B/W Laser Printer Service Manual page 120

FLICKER SET MENU
REGUL 10PPM
THICK 10PPM
exit
OUTBIN TIMING
STD<>MX
MX<>MX
exit
DENSITY TABLE
DENS. TBL =NORMAL
DENS. TBL =ADP
exit ENG ADJUST
FLICKER MODE SEL
FLICKER MODE= 40
POWER SAVE FUNC
VII-6
Adjust the toner fixing temperature
for ragular paper at 10 PPM
printing.
Standard tenperature
- 5 C from standard temperature
+ 5 C from standard temperature
+ 10 C from standard
temperature
Adjust the toner fixing temperature
for thick paper at 21 PPM printing.
Standard tenperature
- 5 C from standard temperature
+ 5 C from standard temperature
+ 10 C from standard
temperature
Adjust the timing to switch between
the standard output tray and the
MX output tray.
From - 0 PPM upto - 3.5 PPM, by
0.5 PPM.
Adjust the timing to switch between
a bin of the MX output tray and
another bin of the MX output tray.
From - 0 PPM upto - 3.5 PPM, by
0.5 PPM.
Switch the toner density table.
Countermeasure for the flicker
problem.
The value is 40 by default. It can
be set in the range of 0 - 63.
Select to use or not to use the
power save mode.