FSINCOS—Sine and Cosine (Continued)
FPU Flags Affected
C1
C2
C0, C3
Additional Itanium System Environment Exceptions
Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1, NaT Register Consumption
Floating-point Exceptions
#IS
#IA
#D
#U
#P
Protected Mode Exceptions
#NM
Real Address Mode Exceptions
#NM
Virtual 8086 Mode Exceptions
#NM
4:170
Set to 0 if stack underflow occurred; set to 1 of stack overflow
occurs.
Indicates rounding direction if the inexact-result exception (#P) is
generated: 0 = not roundup; 1 = roundup.
Set to 1 if source operand is outside the range 2
otherwise, cleared to 0.
Undefined.
Abort.
Stack underflow occurred.
Source operand is an SNaN value, , or unsupported format.
Source operand is a denormal value.
Result is too small for destination format.
Value cannot be represented exactly in destination format.
EM or TS in CR0 is set.
EM or TS in CR0 is set.
EM or TS in CR0 is set.
63
to +2
Volume 4: Base IA-32 Instruction Reference
63
;
Need help?
Do you have a question about the ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS MANUAL VOLUME 4 REV 2.3 and is the answer not in the manual?
Questions and answers