Oil Filter Installation - HYOSUNG GV250 User Manual

3. Drain the oil by removing the drain plug ②
located on the bottom of the engine.
⑥
5
6 4
CAUTION
Insert the filter so that surface of the filter
hole turn toward the engine.

OIL FILTER INSTALLATION

●
INSERTION
DIRECTION
HYOSUNG
16510H05240
3
7
LUSTER
MATERIAL
OUTSIDE
28
CAUTION
When install the oil fiter, necessarily,
"HYOSUNG"character and "16510H05240"
part' s NO. install toward the outside, other-
wise can damage the engine.
WARNING
Engine oil and exhaust pipes can be hot
enough to burn you.
Wait until the oil drain plug and exhaust
pipes are cool enough to touch with bare
hands before draining oil.
WARNING
New and used oil and solvent can be haz-
ardous. Children and pets may be harmed
by swallowing new or used engine oil or
solvent. Continuous contact with used
engine oil has been found to cause skin
cancer in laboratory animals. Brief contact
with used oil or solvent may irritate skin.
● Keep new and used oil and solvent
away from children and pets.
Wear a long-sleeve shirt and waterproof
●
gloves.
Wash with soaf if oil or solvent contact
●
your skin.
4. Remove the three nuts ③ holding the filter
cap ⑥ in place.
5. Replace the engine oil filter ⑦ with a new
one.
6. Before replacing the engine oil filter cover, be
sure to check that the engine oil filter spring
④ and the " O " ring ⑤ are installed correctly.
Use new " O " ring each time the engine oil fil-
ter element is replaced.
7. Replace the oil filter cover and tighten the
nuts securely but do not over tighten them.