Head Lamp; Turn Signal Lamp; Tail / Brake Lamp - HYOSUNG GV 650 EFI Owner's Manual

◉ HEAD LAMP

1. Remove the three screws
and upside) and the head lamp assem-
bly.
8
2. Disconnect the head lamp coupler.
3. Remove the dust cover
③
spring .
4. After removing the bulb at the socket,
replace the new bulb.
5. To install the head lamp, reverse the
above sequence.
CAUTION
The use of a lamp other than specifica-
tion may cause to occur the vehicle fire
and to damage electric parts.
Surely use the only lamp of proper
capacity.
�
①
(right, left
� �
②
and socket
65

◉ TURN SIGNAL LAMP

1. Remove the lens by removing the
screw.
2. Push the bulb, turn it to the counter-
clockwise, and pull it out.
3. After stick in the new lamp, assemble the
lens.
CAUTION
Overtightening the screws may cause
the lens to crack.

◉ TAIL / BRAKE LAMP

's the tail / brake lamp is
LED(Light Emitting Diode) type.
If any abnormal condition are found,
replace the tail / brake lamp assembly.
�