Brake Disk Inspection; Front Brake Fluid Supply; Rear Brake Fluid Supply; Front Brake Lamp Switch - HYOSUNG GV 650 EFI Owner's Manual

◉ BRAKE DISK INSPECTION

Check the brake disk for damage or cracks.

◉ FRONT BRAKE FLUID SUPPLY

1. Place the motorcycle on a level surface
and keep the handlebars straight.
2. Clean the brake fluid reservior around not
to allow dust to get inside of it.
3. Loosen the screw and open the cap.
4. Replenish with brake fluid to the upper
line.
CAUTION
Do not spill any brake fluid on painted or
plastic surfaces as it will damage the
surface severely.
N O T E
The recommended brake fluid
5. Fasten the cap.

◉ REAR BRAKE FLUID SUPPLY

1. Place the motorcycle on a level surface
and keep the handlebars straight.
2. Clean the brake fluid reservior around not
to allow dust to get inside of it.
3. Turn the cap to the counter - clockwise.
4. Replenish with brake fluid to the upper
line.
N O T E
The recommended brake fluid : DOT4
5. Fasten the cap.
: DOT3 or DOT4

◉ FRONT BRAKE LAMP SWITCH

The front brake lamp switch is located
beneath the front brake lever. Loosen the
switch fitting screws and adjust the timing by
moving the switch body forward or back-
ward.
◉ REAL BRAKE LAMP SWITCH
The rear brake lamp switch is located
inside the rear brake pedal.
Move the switch up or down to adjust it
until the switch operates and turns on the
brake lamp after the brake pedal begins to
be depressed.
61