Select Switch; Reset Switch; Speedometer - HYOSUNG GV 650 EFI Owner's Manual

⑧ ⑧

SELECT SWITCH

Use this switch to adjust the following :
In the normal mode
●
Push it for
0.6 ~ 1
speedometer display
seconds
(100% → 75% → 50% → 25% → 100%)
Normal mode
2 seconds
In the clock reset mode
●
Push it for
0.6 ~ 1
Increase the minutes of clock
seconds
Clock reset mode
2 seconds
⑨ ⑨

RESET SWITCH

Use this switch to adjust the following :
In the normal mode
●
Push it for
0.6 ~ 1
Odometer
Trip meter
seconds
To reset the trip meter to
2 seconds zero, while the display indi-
cates trip meter
In the clock reset mode
●
Push it for
0.6 ~ 1
Increase the hour of clock
seconds
Adjustment
To adjust the light of
→ Clock reset mode
Adjustment
Normal mode
→
Adjustment
→ Trip meter
→ Odometer
B
or
A B
Adjustment
⑩ ⑩

SPEEDOMETER

The speedometer indicates the road
speed in kilometers or miles per hour.
⑪ ⑪
"FI" (Fuel Injection) CHECK LAMP
If the fuel injection system fails, the "FI"
A →
check lamp ⑪
LCD(Liquid Crystal Display) display panel
⑩
indicates "FI" letters in following two
modes ;
. The LCD display panel ⑩
A
"FI" letters and speedometer alter-
nately, and the "FI" check lamp ⑪
comes on and remains lit.
. The LCD display panel ⑩
B
"FI" letters continuously and the "FI"
check lamp ⑪
The engine may continue to run in mode
but the engine may not run in mode
A
23
comes on and the
indicates
indicates
comes on and blinks.
.
B