Using The Transmission - HYOSUNG GV 650 C Owner's Manual

Squeeze the clutch lever and pause
momentarily. Engage first gear by depress-
ing the gearshift lever downward.
Turn the throttle grip toward you and at
the same time release the clutch lever gen-
tly and smoothly. As the clutch engages,
the motorcycle will start moving forward.
To shift to the next higher gear, acceler-
ate gently, then close the throttle and
squeeze the clutch lever simultaneously.
Lift the gearshift lever upward to select the
next gear and release the clutch lever and
open the throttle again.
Select the gears in this manner until fifth
gear is reached.
WARNING
Downshifting while the motorcycle is
leaned over in a corner may cause rear
wheel skid and loss of control.
Reduce your speed and downshift
before entering corner.
WARNING
Do not turn the ignition switch to its
"OFF" position or the steering lock to
lock or the engine stop switch to its
" " position whilst riding the motorcy-
cle.
WARNING
Opening the throttle suddenly can be
hazardous.
The front wheel can lift off the ground
and cause loss of control of the motor-
cycle.
Always open the throttle gradually when
you accelerate.

USING THE TRANSMISSION

The transmission is provided to keep the
engine operating smoothly in its normal
operating speed range. The gear ratios
have been carefully chosen to meet the
characteristics of the engine. The rider
should always select the most suitable gear
for the prevailing conditions.
WARNING
Downshifting when engine speed is too
high can ;
cause the rear wheel to skid and lose
traction due to increased engine
braking, resulting in an accident ; or
force the engine to overrev in the
lower gear, resulting in engine dam-
age.
WARNING
Shifting incorrectly can be hazardous.
Engine and drive belt damage can occur
if you do not shift correctly.
Slow down before downshifting and
always release the throttle every time
you shift gears.
46