HYOSUNG GV 650 C Owner's Manual page 26

To reset the trip meter to zero, push the
switch (in the normal mode) for 2 sec-
onds while the display indicates trip meter
B or B you want to reset.
A B
CLOCK
Mode Switch
Normal
Select ( )
Reset ( )
Clock
reset
Select ( )
mode
Select ( )
CLOCK ADJUSTMENT
Push it for
2 ~ 4 seconds
0.6 ~ 1 seconds
0.6 ~ 1 seconds
2 seconds
25
The clock indicates 12-hour mode.
Follow the procedure below to adjust the
clock.
1. Push the switch
for 2 ~ 4 seconds until the hour and min-
utes display blink.
1. It is the clock reset mode.
2. Adjust the hour display by pushing the
switch (in the clock reset mode) for
0.6 ~ 1 seconds.
3. Adjust the minutes display by pushing
the switch (in the clock reset mode)
for 0.6 ~ 1 seconds.
4. Push the switch
mode) for 2 seconds to resume in the
normal mode.
N O T E
If push the switch
mode) for 5 seconds, request to check
the malfunction item's code of the elec-
tric fuel injection.
This time, if not connect the special tool,
the clock indicates the "cHE" letters
then disappear.
The special tool and maintenance
knowledge is necessary to read the
code of the malfunction items.
Contact an authorized Hyosung dealer
to check the malfunction item's code.
Adjustment
Normal mode
Increase the hour of clock
Increase the minutes of clock
Clock reset mode
(in the normal mode)
(in the clock reset
(in the normal
Clock reset mode
Normal mode