Seat Lock; Rear Shock Absorber - HYOSUNG GV 650 C Owner's Manual

SEAT LOCK

The front seat lock is located the left side
cover under the front seat.
To unlock the front seat, insert the ignition
key into the front seat lock and turn it clock-
wise.
To lock the front seat, push down firmly
until the seat latch snaps into the lock posi-
tion.
To remove the rear seat, loosen the rear
seat mounting bolt on the rearside of the
rear seat.
To install the rear seat, slide the seat
hook into the seat hook retainer and install
the rear seat mounting bolt.
WARNING
Before leaving, make sure that the front
and rear seat are properly locked.

REAR SHOCK ABSORBER

Rear shock absorber
Pin spanner
WARNING
Unequal suspension adjustment can
cause poor handling and loss of stability.
Adjust the right and left shock absorber
to the same settings.
To adjust the spring pre-load, turn the
adjuster clockwise or counter-clockwise to
the desired position using the pin spanner.
Position 1 provides the softest spring pre-
load and position 5 provides the stiffest.
from the factory with its adjuster set on
position 2.
34
are delivered