Cracks And Cuts; Tire Tread Condition; Rear Axle Nut - HYOSUNG GT250 FI Owner's Manual

TIRE PRESSURE
(COLD INFLATION)
FRONT
REAR
NORMAL
OVER
CAUTION
If there are some problem with the
tirepressure or cracks and cuts, it will
decrease the riding stability and lead to
flat tire.
◉ ◉ CRACKS AND CUTS
Check if
1) there are visible cracks and cuts.
2) there are pebbles stuck.
SCREW
WORN,
CRACK
FOREIGN
MATERIAL
NORMAL RIDING
SOLO RIDING DUAL RIDING
2.00 kg/ ㎠ 2.00 kg/ ㎠
200 kpa 200 kpa
29.0 psi 29.0 psi
2.25 kg/ ㎠ 2.50kg/ ㎠
225 kpa 250 kpa
36.0 psi
32.0 psi
SHORT
◉ ◉ TIRE TREAD CONDITION
Tire wear
indicator
Operating the motorcycle with excessively
worn tire will decrease riding stability and
can lead to loss of control.
Inspect storage of tire thread' s depth by
the 『tire wear indicator』 .
Replace the front and rear tires at once
when appear the 『tire wear indicator』 .
The standard tire on
are 110/70-17 54H for front, and
150/70-17 69H for rear.
The use of a tire other than standard
may cause trouble.
It is highly recommended to use the
standard tire supplied by Hyosung.
◉ ◉ REAR AXLE NUT
Inspect the rear axle shaft and jointing nut
for loosening.
63
Tire wear
indicator mark
CAUTION