[Bright Cntrl] Adjusting The Lcd Monitor Brightness - Kyocera FineCam SL300R Instruction Manual

2
Press or
U D
[AF METHOD] and then press
3
Press or
U D
the desired setting and then press the OK
button .
E
4
The selected AF method is set and the screen in step 2
reappears.
[BRIGHT CNTRL]
You can adjust the LCD monitor brightness through 5 levels. Set the brightness to your
preferred level.
1
Switch the camera on and press
button until the "
2
Press or
U D
[BRIGHT CNTRL] and then press
3
Press or
U D
the desired setting and then press the OK
button .
E
+2: Sets the maximum brightness.
+1: Sets the brightness slightly higher than normal.
STANDARD: Normal level of brightness. (default)
–1: Sets the brightness slightly lower than normal.
–2: Sets the minimum brightness.
4
The selected brightness is set and the screen in step 2
reappears.
on the 4-way button to select
on the 4-way button to select
Adjusting the LCD Monitor Brightness
" icon lights on the mode select LED.
G
on the 4-way button to select
on the 4-way button to select
.
R
or
O Q
.
R
SET UP(1/3)
F MODE S F
F METHOD SPEED
BRIGHT CNTRL ST ND RD
B CKLIGHT BRIGHT
D TE 2003.01.01
INSERT D TE NO D TE
SET UP(1/3)
F MODE S F
F METHOD SPEED
BRIGHT CNTRL FR MES
B CKLIGHT BRIGHT
D TE 2003.01.01
INSERT D TE NO D TE
on the mode
SET UP(1/3)
F MODE S F
F METHOD SPEED
BRIGHT CNTRL ST ND RD
B CKLIGHT BRIGHT
D TE 2003.01.01
INSERT D TE NO D TE
SET UP(1/3)
+ 2
F MODE
+ 1
F METHOD
BRIGHT CNTRL ST ND RD
– 1
B CKLIGHT
– 2
D TE
INSERT D TE NO D TE
6
6-3