IBM 8682 - Eserver xSeries 350 Hardware Maintenance Manual page 82

Hardware maintenance manual
Table of Contents

Advertisement

The following illustration shows the rear connectors on the SCSI repeater card after
the repeater card is installed, as viewed from the rear of the server.
SCSI repeater
card cable
connector
The following illustration shows how to install a 3-Pack Ultra160 Hot-Swap
Expansion Kit.
To install a 3-Pack Ultra160 Hot-Swap Expansion Kit:
Attention:
take precautions to avoid damage from static electricity. For details on handling
these devices, refer to the following Web site and search for ESD:
http://www.ibm.com
1. Review the information in "Before you begin" on page 50 and in "Safety
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Refer to the documentation that comes with the option to assemble the
4. Align the hot-swap expansion option with the empty slot at the rear of the
5. Slide the hot-swap expansion option down into the guides on the slot at the rear
6. Refer to the documentation that comes with the option to complete the
7. Install additional internal hot-swap hard disk drives in the optional hard disk
72
IBM xSeries 350 Type 8682: Hardware Maintenance Manual
When you handle Electrostatic Discharge-Sensitive devices (ESD),
information" on page 127
external cables; then, remove the top cover (see "Removing the server top
cover and bezel" on page 53).
hot-swap expansion option.
optional hard disk drive cage, adjacent to the standard hot-swap hard disk drive
backplane.
of the optional hard disk drive cage, and secure it to the server with the blue
slide latch located on top of the optional hard disk drive cage.
installation of the option.
drive cage (see "Installing a hot-swap hard disk drive" on page 62), and connect
the drives to the optional hot-swap backplane. You can connect a maximum of
three hot-swap hard disk drives to the optional hot-swap backplane.
SCSI power
cable
connector
2
I C cable
connector
SCSI cable
connector
Expansion backplane

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eserver xseries 350 type 8682

Table of Contents