IBM 8682 - Eserver xSeries 350 Hardware Maintenance Manual page 68

11. Install the ServeRAID adapter in the desired PCI slot. See "Installing a hot-plug
12. Connect the SCSI cable to an internal channel connector on the ServeRAID
58
IBM xSeries 350 Type 8682: Hardware Maintenance Manual
Attention: When you route the SCSI cable, observe the following:
v Do not block the ventilated space in front of the fan assembly.
v Do not place the SCSI cable fold on top of the fan assembly.
v Do not route the SCSI cable over the memory board assembly.
ServeRAID adapter
CPU DASD
Memory
NMI
PCI SP Bus
Bus A B C D
Event Log
Power Non Red
Supply
1 2 3 4
Over Spec
Fan Temp
adapter" on page 55 for adapter installation instructions. Refer to the
ServeRAID adapter option documentation for additional information on
installing a ServeRAID adapter in the server and connecting the SCSI cable to
a ServeRAID adapter.
adapter.
Note: Refer to the Using IBM ServeRAID book on the Documentation CD for
information on ServeRAID adapters and controllers.