IBM 8682 - Eserver xSeries 350 Hardware Maintenance Manual page 121

Error Code/Symptom
129
(Internal cache error)
151
(Real time clock error)
161
(Real time clock battery error)
162
(Device Configuration Error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configura-tion.
163
(Real-Time Clock error)
164
(Memory configuration changed, see
"Memory Settings" on page 37)
175
(Hardware error)
176, 177, 178
(Security hardware error)
184
(Power-on password corrupted)
185
(Drive startup sequence information
corrupted)
186
(Security hardware control logic failed)
187
(VPD serial number not set.)
188
(Bad EEPROM CRC #2)
189
(Three attempts were made to access the
server with invalid passwords)
FRU/Action
1. Processor
2. Optional processor (if installed)
1. Run Diagnostics
2. Battery
3. System Board
1. Run Configuration/Setup
2. Battery
3. System Board
1. Run Configuration/Setup
2. Battery
3. Failing Device
4. System Board
1. Run Configuration/Setup
2. Battery
3. System Board
1. Run Configuration/Setup
2. DIMM
3. Memory Card
4. System Board
1. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Set serial number in Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup, enter the administrator password
2. System Board.
111
Symptom-to-FRU index