IBM 8682 - Eserver xSeries 350 Hardware Maintenance Manual page 122

Error Code/Symptom
201
(Memory test error, see "Memory Settings"
on page 37) If the server does not have
the latest level of BIOS installed, update
the BIOS to the latest level and run the
diagnostic program again.
229
(Cache error)
289
(DIMM has been disabled by user or
system, see "Memory Settings" on page
37)
301
(Keyboard or keyboard controller error)
303
(Keyboard controller error)
602
(Invalid diskette boot record)
604
(Diskette drive error)
662
(Diskette drive configuration error)
962
(Parallel port error)
11XX
(System board serial port 1 or 2 error)
1162
(Serial port configuration conflict)
1200
(processor machine check)
112
IBM xSeries 350 Type 8682: Hardware Maintenance Manual
FRU/Action
1. Run memory diagnostics.
2. DIMM
3. Memory card
4. System Board
1. Processor
2. Optional Processor (if installed)
1. Run Configuration/Setup
2. Disabled DIMM
1. Keyboard
2. System Board
1. System Board
2. Keyboard
1. Diskette
2. Diskette Drive
3. Cable
4. System Board
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
1. Disconnect external cable on parallel port.
2. Run Configuration/Setup
3. System Board
1. Disconnect external cable on serial port.
2. Run Configuration/Setup
3. System Board
1. Disconnect external cable on serial port
2. Run Configuration/Setup
3. System board
1. Processor