Battery Replacement - Dodge 2008 Dakota Owner's Manual

Dodge 2008 dakota automobile owner's manual
Hide thumbs Also See for 2008 Dakota:
Table of Contents

Advertisement

26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
10. Repeat steps 8 and 9 to program up to six additional
transmitters.
11. Turn the ignition to the OFF position.
12. Your vehicle will remain in program mode up to 60
seconds from when the original chime was heard. After
60 seconds, all programmed transmitters function nor-
mally.
NOTE: If you do not have a programmed transmitter,
contact your dealer for details.

Battery Replacement

The recommended replacement battery is CR2032.
NOTE: Perchlorate Material – special handling may ap-
ply, see www.dtsc.ca.gov/hazardouswaste/perchlorate
1. If the key fob is equipped with a screw, remove the
screw. With the transmitter buttons facing down, use a
flat blade to pry the two halves of the transmitter apart.
Make sure not to damage the elastomer seal during
removal.
2. Remove and replace the battery. When replacing the
battery, match the + sign on battery to the + sign on the
inside of the battery clip, located on back cover. Avoid

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 nd dakota2008 dakota series

Table of Contents