To Accelerate For Passing - Dodge 2008 Dakota Owner's Manual

124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Functions
Engage Speed
Minimun RESUME Speed
ACCEL Increase
DECEL Decrease
Dropout Speed

To Accelerate For Passing

Depress the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.
NOTE: When driving uphill, at elevations above 2,000
feet (610 meters), or when the vehicle is heavily loaded
(especially when towing) the vehicle may slow below the
SET speed. If the vehicle speed drops below (refer to the
table below for the speed for your specific engine), the
speed control will automatically disengage. If this hap-
pens, you can push down on the accelerator pedal to
maintain the desired speed.
All Engines
30 mph (48 km/h)
25 mph (40 km/h)
2 mph (3km/h)
1 mph (2 km/h)
25 mph (40 km/h)
Vehicles equipped with a Automatic transmission may
exhibit several downshifts under the above conditions.
To reduce the frequency of the downshifts and to im-
prove vehicle performance, it is advisable to lock out
overdrive by pressing the "TOW/HAUL" button located
at the end of the gear shifter.