Dodge 2008 Durango Owner's Manual

Dodge 2008 durango automobile owner's manual

Table of Contents

Quick Links

Download this manual

SECTION

INTRODUCTION

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

INSTRUMENT PANEL AND CONTROLS

STARTING AND OPERATING

WHAT TO DO IN EMERGENCIES

MAINTAINING YOUR VEHICLE

MAINTENANCE SCHEDULES

IF YOU NEED CONSUMER ASSISTANCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461

INDEX

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .365

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .451

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

PAGE

Table of Contents

Chapters

Table of Contents

Summary of Contents for Dodge 2008 Durango

Page 1: Introduction
TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 3: Table Of Contents
CONTENTS Introduction ......4 Rollover Warning ......4 How To Use This Manual .
Page 4: Introduction
4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully.
Page 5: How To Use This Manual
INTRODUCTION 5 Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year, and could reduce disabling injuries by 2 million annually.
Page 6 6 INTRODUCTION...
Page 7: Warnings And Cautions
INTRODUCTION 7 WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 8: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 9 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Ignition Key Removal ....12 Locking Doors With The Key .
Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information ....24 Programming Additional Transmitters ..25 Battery Replacement .
Page 11 Seat Belts And Pregnant Women ... .52 Seat Belt Extender ..... .52 Driver And Right Front Passenger Supplemental Restraint System (SRS)—Airbags .
Page 12: Things To Know Before Starting Your Vehicle 9
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer. Ask your dealer for these numbers and keep them in a safe place.
Page 13: Locking Doors With The Key
in the ignition cylinder. If this occurs, rotate the key to the right slightly, then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable.
Page 14 14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The system uses ignition keys, which have an embedded electronic chip (transponder), to prevent unauthorized vehicle operation. Therefore, only keys that are pro- grammed to the vehicle can be used to start and operate the vehicle.
Page 15: Replacement Keys
All of the keys provided with your new vehicle have been programmed to the vehicle electronics. Replacement Keys NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key is programmed to a vehicle, it cannot be programmed to any other vehicle.
Page 16: General Information
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the “ON” position within 15 seconds. After ten seconds, a chime will sound. In addition, the Vehicle Security Alarm Indicator Light will begin to flash.
Page 17: Ignition And Steering Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 IGNITION AND STEERING LOCK In the LOCK position, the steering and ignition systems are locked to provide anti-theft protection for your ve- hicle. It may be difficult to turn the key from the LOCK position when starting your vehicle, if the steering wheel is locked.
Page 18: Ignition Accessory Delay Feature
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! The key cannot be turned to LOCK until the selector is in the PARK position. Do not attempt to pull the shift lever out of PARK after the key is in the LOCK position.
Page 19: To Set The Alarm
To Set the Alarm: The alarm will set when you use the power door locks or use the Keyless Entry transmitter to lock the doors. After all the doors are locked and closed the security light in the instrument cluster will flash rapidly to signal that the system is arming.
Page 20: Illuminated Entry
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNLOCK button or by inserting a programmed Sentry Key into the ignition and turning the key to the ON position. ILLUMINATED ENTRY Vehicles Equipped With Power Door Locks All interior lights will illuminate in the vehicle when the doors are unlocked using the key fob.
Page 21: To Unlock The Doors And Liftgate
NOTE: Your vehicle’s keyfob may have three, four or five buttons (shown), depending on the optional features purchased with your vehicle. This system allows you to lock or unlock the doors and liftgate or activate the panic alarm from distances a minimum of 66 feet (20 meters) using a hand held radio transmitter.
Page 22: To Lock The Doors And Liftgate
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Release both buttons at the same time. 4. Test the feature while outside of the vehicle, by pressing the LOCK/UNLOCK button on the keyfob. NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm.
Page 23 4. To reactivate this feature, repeat the above steps. 5. Test the horn chirp feature while outside of the ve- hicle, by pressing the LOCK button on the key fob with the ignition in the OFF position and the key removed. NOTE: Pressing the LOCK button on the keyfob, while you are inside the vehicle, will activate the Security Alarm.
Page 24: Using The Panic Alarm
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using the Panic Alarm To activate the Panic mode while the ignition is OFF press and release the PANIC button on the transmitter once. When the Panic mode is activated, the interior lights will illuminate, the headlamps and parking lights will flash, and the horn will sound.
Page 25: Programming Additional Transmitters
Programming Additional Transmitters Vehicles will be shipped from the assembly plants with two key fob transmitters programmed only for that vehicle. A total of eight fobs can be programmed for your vehicle. Additional fobs can be programmed to your vehicle through the use of a currently programmed fob. NOTE: When entering program mode using that fob, all other programmed fobs will be erased and you will have to reprogram them for your vehicle.
Page 26: Battery Replacement
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 12. Repeat steps 8 through 10 to program up to six additional fobs. 13. Turn the ignition to the OFF position. 14. Your vehicle will remain in program mode up to 60 seconds from when the original chime was heard.
Page 27: Remote Starting System - If Equipped
with your fingers. Skin oils may cause battery deteriora- tion. If you touch a battery, clean it with rubbing alcohol. 3. To reassemble the transmitter case, snap the two halves of the case together. Make sure there is an even “gap”...
Page 28: Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To enter the vehicle while the engine is running during a remote start, you must first unlock the vehicle using the UNLOCK button on the key fob. After the vehicle is unlocked, you have 60 seconds to enter the vehicle, insert the key in the Ignition and move it to the RUN position, otherwise the engine will cancel remote start and auto- matically turn off.
Page 29: Power Door Locks
WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors when you drive as well as when you park and leave the vehicle. • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.
Page 30 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE chime will sound if the key is in the ignition switch and a door is open, as a reminder to remove the key. Automatic Door Locks If this feature is enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
Page 31 Auto Unlock On Exit — If Equipped This feature unlocks all of the doors of the vehicle when any door is opened (excluding the liftgate). This will occur only after the vehicle has been shifted into the Park position after the vehicle has been driven (shifted out of Park and all doors closed).
Page 32: Child Protection Door Lock
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Protection Door Lock To provide a safer environment for children riding in the rear seat, the rear doors of your vehicle have the child- protection door lock system. Child Lock To use the system, open each rear door and slide the control UP to engage the locks and DOWN to disengage the child-protection locks.
Page 33: Windows
WINDOWS Power Windows Window Switches The control on the left front door has up-down switches that give you finger tip control of all four power win- dows. There is a single opening and closing switch on the passenger doors for passenger window control. The THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 windows will operate only when the ignition switch is turned to the ON position and for ten minutes after the...
Page 34: Auto Down
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Down The driver’s and front passenger window switch has an Auto Down feature. Push the window switch past the first detent, release, and the window will go down automatically. To cancel the Auto Down movement, operate the switch in either the up or down direction and release the switch.
Page 35: Window Lockout Switch
Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be reset. To reset Auto-Up: Pull the window switch up and close the window com- pletely, then pull and hold the switch for 1 second. Window Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on the other doors.
Page 36: Power Liftgate - If Equipped
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When the engine is running from a Remote Start (if equipped), the vehicle must first be unlocked by pressing the remote transmitter UNLOCK button prior to activating the Power Liftgate otherwise the engine will stop automatically.
Page 37 When the remote keyless entry transmitter button is pressed two times and the “Lamp Flash” feature is enabled the turn signals will flash twice to signal that the liftgate is opening or closing. The power liftgate may also be opened by pressing the switch located on the overhead console.
Page 38 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The power liftgate must be in the full open position in order to power close. If the liftgate is not fully open, press the remote keyless entry transmitter or overhead console button to fully open the liftgate and then press again to close.
Page 39: Occupant Restraints
WARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed.
Page 40: Lap/Shoulder Belts
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly.
Page 41 WARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. Pulling Out Belt and Latchplate 2. The seat belt latch plate is above the back of the front seat, next to your arm in the rear seat.
Page 43 WARNING! • A belt buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increas- ing the possibility of injury.
Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen.
Page 45: Adjustable Upper Shoulder Belt Anchorage
Adjustable Upper Shoulder Belt Anchorage In the front and second row outboard seats, the shoulder belt can be adjusted upward or downward to help position the belt away from your neck. Push in on the anchorage release button to release the anchorage, and then move it up or down to the position that serves you best.
Page 46: Second Row Center Seat Belt
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Second Row Center Seat Belt The center seating position in the second row has a seat belt assembly that can be converted from the normal emergency locking mode to the automatic locking mode. The seat belt should only be used in the automatic locking mode when a child seat is installed at this seating location.
Page 47: Rear 60/40 Seat Third Row Center Three Point Belt - If Equipped
How To Use The Automatic Locking Mode 1. Buckle the combination lap/shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is extracted. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode.
Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • If the small (keyed buckle) latch plate and keyed buckle are not properly connected when the seat belt is used by an occupant, the seat belt will not be able to provide the proper restraint and will increase the risk of injury in a collision.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 To reattach the seat belt to the third row center seat, pull the small (keyed buckle) latch plate forward from the headliner slots and insert it into the keyed buckle until there is an audible click. Refer to the previous section for the proper seat belt usage.
Page 50: Seat Belt Pretensioners
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Pretensioners The seat belts for both front seating positions are equipped with pretensioning devices that are designed to remove any slack from the seat belt system in the event of a collision.
Page 51 Once the warning is triggered it can be paused if the vehicle speed drops below 5 mph (8 km/h. The warning will be restarted if the vehicle speed becomes greater than 5 mph. The Enhanced Warning System (BeltAlert) can be en- abled or disabled by your authorized dealer or by following these steps: NOTE: The following steps must occur within the first...
Page 52: Seat Belts And Pregnant Women
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts and Pregnant Women We recommend that pregnant women use seat belts throughout their pregnancies. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug against the hips as possible.
Page 53: Driver And Right Front Passenger Supplemental Restraint System (Srs)-Airbags
Driver And Right Front Passenger Supplemental Restraint System (SRS)—Airbags This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger front airbag is mounted in THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 the instrument panel, above the glove compartment.
Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them. You may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing.
Page 55 Here are some simple steps you can follow to minimize the risk of harm from a deploying airbag. 1. Children 12 years and under should always ride buckled up in a rear seat in an appropriate child restraint. Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag.
Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
Page 57 How the Airbag System Works • The Occupant Restraint Controller (ORC) determines if a frontal collision is severe enough to require the airbags to inflate. The front airbag inflators are de- signed to provide different rates of airbag inflation from direction provided by the ORC. The ORC will detect a roll over when equipped with side airbags.
Page 58 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel. When the ORC detects a collision requiring the airbags, it signals the inflator units.
Page 59 NOTE: At no time should any supplemental restraint system (SRS) component or SRS related component or fastener be modified or replaced with any part except those which are approved by DaimlerChrysler/Mopar. • The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position every- one for the best interaction with the front airbag.
Page 60 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE irritation continues, see your doctor. If these particles settle on your clothing, follow the garment manufac- turer’s instructions for cleaning. • It is not advisable to drive your vehicle after the airbags have deployed. If you are involved in another collision, the airbags will not be in place to protect you.
Page 61 NOTE: Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Enhanced Accident Response System If the airbags deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically, the engine will shut off and the hazard lights will turn on. In addition, approximately 5 seconds after the vehicle has stopped moving, the interior lights will light until the ignition switch is turned off.
Page 62: Event Data Recorder (Edr)
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) EDR will be activated on Front, Side and roll over events. In the event of an accident, your vehicle is designed to record up to 5-seconds of specific vehicle data parameters (see the following list) in an event data recorder prior to the moment of airbag deployment, or near deployment, and up to a quarter second of high-speed deceleration...
Page 63 provided to the custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the US govern- ment and various states. Data of a potentially sensitive nature, such as would identify a particular driver, ve- hicle, or crash, will be treated confidentially.
Page 64: Child Restraint
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Traction/stability control status • Tire pressure monitoring system status (if equipped) Child Restraint Everyone in your vehicle needs to be buckled up all the time - babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems.
Page 65 by children who weigh more than 20 lbs (9 kg) but are less than one year old. Both types of child restraints are held in the vehicle by the lap/shoulder belt or the LATCH child restraint anchorage system. (See the LATCH - Child Seat Anchorage System section.) •...
Page 66 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Check belt fit periodically. A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm.
Page 67 around the child restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on the shoulder portion of the lap/shoulder belt will tighten the belt. The cinching latch plate will keep the belt tight, however, any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary.
Page 68 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH - Child Seat Anchorage System (Lower Anchors and Tether for CHildren) Your vehicle’s second row seat is equipped with the child restraint anchorage system called LATCH. The LATCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle...
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 only install the child restraints using the vehicle’s seat belts. Please refer to the next section for typical installa- tion instructions. Second Row Seat Right Side Second Row Seat Left Side...
Page 70 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing the LATCH-Compatible Child Restraint System We urge that you carefully follow the directions of the manufacturer when installing your child restraint. Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provided with the child restraint system.
Page 71 NOTE: When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach.
Page 72 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using the Vehicle Seat Belt The second and third row seats have either cinching latch plates or automatic locking retractors which are designed to keep the lap portion tight around the child restraint so that it is not necessary to use a locking clip.
Page 73 back behind the center seating position. The hooks in the rear floor are NOT designed to withstand the forces that may occur during a crash. WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child.
Page 74: Engine Break-In Recommendations
74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Route the tether strap under the head restraint and between the two headrest posts. 3. Attach the tether strap hook of the child restraint to the tether anchor located on the seat back and remove the slack in the tether strap according to the manufacturer’s instructions.
Page 75: Safety Tips
conditions under which vehicle operations will occur. The recommended viscosity and quality grades are shown in Section 7. NON-DETERGENT OR STRAIGHT MINERAL OILS MUST NEVER BE USED. A new engine may consume some oil during its first few thousand miles of operation. This is a normal part of the break-in and is not an indication of difficulty.
Page 76: Safety Checks You Should Make Inside The Vehicle
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace or adjust as required. Safety Checks You Should Make Inside The Vehicle Heater Defroster Ducts Inspect the heater defroster ducts for proper operation.
Page 77: Safety Checks You Should Make Outside The Vehicle
Safety Checks You Should Make Outside The Vehicle Tires Examine tires for tread wear or uneven wear patterns. Check for stones, nails, glass or other objects lodged in the tread. Inspect for tread cuts or sidewall cracks. Check wheel nuts for tightness and tires for proper pressure. Lights Check the operation of all exterior lights.
Page 79 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors .......83 Inside Day/Night Mirror ....83 Automatic Dimming Mirror —...
Page 80 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information ....114 Seats ....... . 114 Front Seat Manual Seat Adjustment .
Page 81 Battery Saver ......139 Headlight Delay ..... . 139 Automatic Headlights —...
Page 82 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overhead Console With Electronic Vehicle Information Center (EVIC) — If Equipped ..159 Dome/Reading Lights ....159 Electronic Vehicle Information Center (EVIC) —...
Page 83: Mirrors
MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Day/Night Mirror UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of truck).
Page 84: Outside Mirrors
84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight...
Page 85: Electric Remote-Control Mirrors
Electric Remote-Control Mirrors The controls for the power mirrors are located on the driver’s door trim panel. Power Mirror Control UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 Mirror Directions To adjust a mirror, turn the control wand toward the left or right mirror positions indicated.
Page 86: Illuminated Vanity Mirrors - If Equipped
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Vehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object.
Page 87: Heated Mirrors - If Equipped
Heated Mirrors — If Equipped Heated mirrors are automatically activated when you depress the rear window defroster switch located on the instrument panel. The light will illuminate to indicate that the heating elements are ON. Turning Off the rear window defroster or the ignition will deactivate the heated mirrors.
Page 88 NOTE: For UConnect™ customer support, visit the following web sites: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.com/uconnect • or call 1–877–855–8400 UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micro-...
Page 89: Operation
radio or the mirror has the two control buttons (Phone Button and Voice Recognition Button) that will enable you to access the system. Voice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation”...
Page 90 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For certain operations, compound commands can be used. For example, instead of saying Setup and then Phone Pairing, the following compound command can be said: Setup Phone Pairing. • For each feature explanation in this section, only the combined form of the voice command is given.
Page 91 To complete the pairing process, you will need to refer- ence your cellular phone owner’s manual. The UCon- nect™ website may also provide detailed instructions for pairing. The following are general phone to UConnect™ System pairing instructions: • Press the “Phone” button to begin. •...
Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dial by Saying a Number • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Dial. • System will prompt you to say the number you want call.
Page 93 Add Names to Your UConnect™ Phonebook NOTE: Adding names to phone book is recommended when vehicle is not in motion. • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Phonebook New Entry. •...
Page 94 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Exchange Profile (OBEX). Please see your phone owners’ manual for specific instructions on how to send these entries from your phone. NOTE: • Phone handset must support Bluetooth OBEX trans- fers of phonebook entries to use this feature. •...
Page 95 Phonebook Edit can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number, but you can add John Doe’s work number later using the Phonebook Edit feature.
Page 96: Phone Call Features
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After confirmation, the phone book entries will be deleted. • Note that only the phone book in the current language is deleted. List All Names in the UConnect™ Phonebook • Press the “Phone” button to begin. •...
Page 97 call, press and hold the ’Phone’ button until you hear a single beep indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone.
Page 98 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Conference Call When two calls are in progress (one active and one on hold), press and hold the “Phone” button until you hear a double beep indicating that the two calls have been joined into one conference call.
Page 99: Uconnect™ System Features
Call Continuation Call continuation is progression of a phone call on UConnect™ system after the vehicle ignition key has been switched to off. Call continuation functionality available on the vehicle can be any one of three types: • After ignition key is switched off, a call can continue on the UConnect™...
Page 100 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect™ system is operational, you may reach the emergency number as follows: •...
Page 101 Please refer to the 24-Hour “Towing Assistance” cover- age details in the Warranty information booklet and on the 24–Hour Towing Assistance Card. Paging To learn how to page refer to Working with Automated Systems. Paging works properly except for pagers of certain companies which time-out a little too soon to work properly with the UConnect™...
Page 102 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE entries. To use this feature, dial the number you wish to call and then press the “Voice Recognition” button and say “Send.” The system will prompt you to enter the name or number, say the name of the phonebook entry you wish to send.
Page 103 notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect™. The status is given for roaming, network signal strength, phone battery strength, etc. Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the UConnect™...
Page 104: Advanced Phone Connectivity
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Advanced Phone Connectivity Transfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred from your cellular phone to the UConnect™ system without terminating the call. To transfer an ongo- ing call from your UConnect™...
Page 105: Things You Should Know About Your Uconnect™ System
• Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Setup Select Phone and follow the prompts. • You can also press the “Voice Recognition” button anytime while the list is being played, and then choose the phone that you wish to select.
Page 106 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE From outside the UConnect™ mode (e.g. from radio mode) • Press and hold the “Voice Recognition” button for 5 seconds until the session begins, or, • Press the “Voice Recognition” button and say Setup, Voice Training command.
Page 107 • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some. • When navigating through an automated system, such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say Send.
Page 108 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • dry weather condition. • operation from driver seat. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnect™ system. •...
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109...
Page 110 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111...
Page 112 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate(s) zero three four five seven eight nine star (*) plus (+) pound (#) add location Voice Commands Primary Alternate(s) call cancel confirmation prompts. continue delete dial download edit emergency English erase all Espanol...
Page 113 Voice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry pager pair a phone phone pairing pairing phonebook phone book previous record again UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Voice Commands Primary Alternate(s) redial return to main menu return or main menu select phone...
Page 114: General Information
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. •...
Page 115: Front Seats Manual Seat Recliners
WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Front Seats Manual Seat Recliners The bucket seats are equipped with recliners.
Page 116: Manual Lumbar Support Adjustment - If Equipped
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar Support Adjustment — If Equipped The manual lumbar support adjustment lever is located on the right side of the driver seat and on the left side of the passenger’s seat. Moving the lumbar control lever fore and aft increases or decreases the lumbar support.
Page 117: Way Driver's Power Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 8 - Way Driver’s Power Seat — If Equipped The driver power seat switches are located on the left side of the driver seat lower side trim. The bottom switch controls up/down, forward/rearward, and tilt adjust- ment.
Page 118: Way Passenger's Power Seat - If Equipped
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4 - Way Passenger’s Power Seat — If Equipped The front passenger’s power seat switches are located on the right side of the passenger seat lower side trim. The bottom switch controls forward/rearward adjustment. The top switch controls the seatback recline adjustment.
Page 119 The front heated seat system allows the driver and front passenger to select from two different levels of supple- mental electrical seat heating, or no seat heating to suit their individual comfort requirements. With the ignition switch in the RUN position, depressing the heated seat switch rocker to its momentary high or low position provides power to the heated seat element and maintains the requested temperature setting.
Page 120 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE off. Both of the indicators on identifies High heat level. The lower indicator on only, identifies Low heat level. NOTE: The high heat setting will operate for approxi- mately 30 minutes. After 30 minutes, the system will automatically transition to the low heat setting.
Page 121: Second Row Bucket Seats - Fold And Tumble
Second Row Bucket Seats — Fold and Tumble Second row bucket seats have seatback recliners on both seating positions. Raising the lever allows the seatback to be reclined an additional 11 degrees. The second row bucket seats can be folded and tumbled forward for easy access to the third seat or rear cargo area.
Page 122 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Pull up on the release handle and lift to tumble the seat fully forward. If the seat contacts the rear of the front seat, move the front seat forward. Tumbling the Seat Forward To relatch the seat, tilt the seat rearward and push down firmly to engage the rear attachments.
Page 123: Second Row 40/20/40 Seat - Fold And Tumble
WARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. Second Row 40/20/40 Seat — Fold and Tumble The 40/20/40 seat configuration is standard on all mod- els.
Page 124 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Fold the 40% seatbacks fully raise the lever on the side of the seat to release the seatback. The seatback can now be folded into the down position for use as a cargo floor, or the seat can now be tumbled forward to allow access to the rear of the vehicle.
Page 125 Fold, Tumble, and Recline Lever UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 To Tumble the 40% seat, fully raise the lever on the side of the seat to release the floor latches and tumble the seat. WARNING! Do not drive the vehicle with the outer 40% second row seats in the tumbled position.
Page 126: Third Row Seat Bench - If Equipped
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The seatback must be fully folded into the down position to allow the lever to be raised enough to release the floor latches. Tumble Lever To Fold and Tumble the 2nd row 40% seats from the 3rd row, fully raise the lever at the rear of the seat to fold the seatback.
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Seat Cushion Pockets Seat Cushion Movement Up And Forward...
Page 128 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! When loading cargo into the rear of you vehicle with the 3rd row seat folded flat, be careful not to damage the material on the head restraints. NOTE: The seat belt buckles are hinged to fold with the seat back.
Page 129: Third Row 60/40 Folding - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Third Row 60/40 Folding — If Equipped Third Row Seat 40% Seatback Fold Third Row Seat...
Page 130 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Third Row Seat Features Third Row Seat Folded Forward...
Page 131: Driver Memory System - If Equipped
Third Row Seat Return Pull Strap DRIVER MEMORY SYSTEM — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat position, driver’s outside mirror position, adjustable UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 brake and accelerator pedals position, Automatic Tem- perature Control (ATC) temperature and radio station preset settings.
Page 132: Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE linked to either memory position. The memory system can accommodate up to two transmitters, each transmit- ter linked to either of the two memory positions. Setting Memory Positions and Linking Remote Keyless Entry Transmitter to Memory NOTE: Each time the SET (S) button and a numbered button (1 or 2) are pressed, you erase the memory settings for that button and store new settings.
Page 133: Memory Position Recall
NOTE: A chime sound may be heard if Setting Memory was inhibited for any reason. Memory Position Recall NOTE: • The driver’s seat belt must be unbuckled to recall memory positions. • The vehicle must be in Park to recall memory posi- tions.
Page 134: To Disable A Transmitter Linked To Memory
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Disable A Transmitter Linked to Memory 1. Turn the ignition switch to the OFF position and remove the key. 2. Press and release the memory SET (S) button located on the driver’s door. 3.
Page 135: Driver Easy Exit And Easy Entry Control
Driver Easy Exit and Easy Entry Control This additional feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the vehicle. The seat cushion will move rear- ward approximately 2.5 inches (60 mm) when the key is removed from the ignition switch.
Page 136 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then push the safety latch lever to the left. It is located between the grille and hood opening right of the center. Hood Safety Catch To prevent possible damage, do not slam the hood to close it.
Page 137: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 LIGHTS Headlight Switch Headlight Switch Location...
Page 138: Interior Lights
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interior Lights Dimmer Control Courtesy and dome lights are turned on when the front doors are opened, when the dimmer control (rotating wheel on the right side of the switch) is rotated to the second upward detent position, or when the UNLOCK button is pressed on the key fob.
Page 139: Battery Saver
Battery Saver To protect the life of your vehicle’s battery, Load Shed- ding is provided for both the interior and exterior lights. If the ignition is off and any door is left ajar for eight minutes or the dimmer control is rotated upwards for 15 minutes, the interior lights will automatically turn off.
Page 140: Automatic Headlights - If Equipped
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped Automatic Headlights can be activated by rotating the rotary headlight switch to the symbol “A.” The head- lights will turn on when the engine is running and the ambient light sensor indicates that the headlights should be activated.
Page 141: Daytime Running Lights (Canada Only)
Daytime Running Lights (Canada Only) The headlights on your vehicle will illuminate when the engine is started. This provides a constant “Lights ON” condition until the ignition is turned OFF. The lights illuminate at reduced intensity. If the parking brake is applied the Daytime Running Lights will turn off.
Page 142: Multifunction Control Lever
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE indicator light located in the instrument cluster will illuminate when the fog lights are on. The fog lights will turn off when the switch is pressed in, when the head- light switch is rotated to the OFF position, or the high beam is selected.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Turn Signal Auto-Mode Tap the multi-function control lever once and the turn signal (left or right) will flash 3 times, and automatically turn off. Passing Light You can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer- ing wheel.
Page 144: Windshield Wipers And Washers
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS Windshield Wipers Windshield Wiper Switch The wipers and washers are operated by a switch in the multifunction control lever. Turn the end of the handle to select the desired wiper speed. Intermittent Wiper System The intermittent feature of this system was designed for use when weather conditions make a single wiping cycle,...
Page 145 WARNING! Sudden loss of visibility through the windshield could lead to an accident. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with defroster before and during wind- shield washer use.
Page 146: Windshield Washers
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Washers To use the washer, push in on the washer knob on the end of the multifunction control lever and hold while spray is desired. If the washer knob is depressed while in the delay range, the wiper will operate for several seconds after the washer knob is released.
Page 147: Tilt Steering Column
TILT STEERING COLUMN To tilt the column, pull rearward on the lever below the turn signal control and move the wheel up or down, as desired. Push the lever forward to lock the column firmly in place. Tilt Steering Column Lever UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 WARNING! Tilting the steering column while the vehicle is...
Page 148: Driver Adjustable Pedals - If Equipped
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER ADJUSTABLE PEDALS — IF EQUIPPED Adjustable Pedals Switch The power adjustable accelerator and brake pedals allow the driver to establish a comfortable position relative to the steering wheel and pedals. Adjustment 1. Position the driver seat so that you are at least 10 inches (254 mm) away from the airbag located in the center of the steering wheel.
Page 149: Electronic Speed Control - If Equipped
CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become lim- ited if movement is stopped by an obstruction in the adjustable pedal’s path.
Page 150: To Set At A Desired Speed
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE can be reactivated by pushing the speed control switch ON / OFF button and re-establishing the desired vehicle SET speed. Push the ON/OFF button to the ON position. In the instrument cluster, the word “CRUISE” illuminates when the system is on.
Page 151: To Vary The Speed Setting
To Vary The Speed Setting When the speed control is on, speed can be increased by pressing and holding the ACCEL button. When the button is released, a new set speed will be established. Tapping the ACCEL button once will result in a speed increase (refer to the table below for the speed for your specific engine).
Page 152: To Accelerate For Passing
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Accelerate For Passing Depress the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed. NOTE: When driving uphill, at elevations above 2,000 feet (610 meters), or when the vehicle is heavily loaded (especially when towing) the vehicle may slow below the SET speed.
Page 153 When the driver selects Reverse the system scans for objects behind the vehicle using four sensors located in the rear bumper. Objects can be detected from up to 78.7 inches (200 cm). A warning display above the rear window provides both visible and audible warnings indicating the range of the object.
Page 154 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM: REAR CORNERS 1st LED 2nd LED 3rd LED 4th LED 31.5 in. (80 cm) 5th LED 25.5 in. (65 cm) 6th LED 20 in. (50 cm) 7th LED 16 in.
Page 155 WARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up.
Page 156: Rear Camera - If Equipped
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Jackhammers, large trucks, and other vibrations could affect the performance of the system. If “Service Park Assist System” appears in the Electronic Vehicle Information Center (EVIC) after making sure the rear bumper is clean please see your authorized dealer. To turn on/off the rear park assist system, refer to the Personal Settings (Customer Programmable Features) in Section 3 of this Owner Manual.
Page 157 WARNING! Drivers must be careful when backing up even when using the Rear Camera System. Always check care- fully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must con- tinue to pay attention while backing up.
Page 158: Overhead Console
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE The overhead console has the following features: • Courtesy Lights • Garage Door Opener — If Equipped • Electronic Vehicle Information Center (EVIC) — If Equipped Courtesy/Reading Lights Near the front of the console is one courtesy and two reading lights.
Page 159: Understanding The Features Of Your Vehicle 159
OVERHEAD CONSOLE WITH ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED The overhead console contains dome/reading lights, and an Electronic Vehicle Information Center (EVIC). Dome/Reading Lights Located in the overhead console are two dome/reading lights. The dome/reading lights illuminate when a door is opened or when the interior lights are turned on by rotating the dimmer control located on the Headlight Switch.
Page 160 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Trip Functions Pressing the STEP button allows you to scroll through one of the following Trip Function features: • TRIP – Shows the total distance traveled since the last reset. To reset the TRIP function, press and hold the RESET button.
Page 161 NOTE: Significant changes in driving style or vehicle loading will greatly affect the actual drivable distance of the vehicle, regardless of the DTE displayed value. • When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of LOW FUEL.
Page 162 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OIL CHANGE REQUIRED — If Equipped Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval.
Page 163 Use the STEP button to display one of the following: • “LANGUAGE” – When in this display you may select one of several different languages for all display nomenclature, including the trip functions. Press the RESET button while in this display to select your preferred language.
Page 164 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “SOUND HORN W/LOCK > YES” – When ON is selected, a short horn sound will occur when the remote keyless entry “Lock” button is pressed. This feature may be selected with or without the flash lights on lock/unlock feature.
Page 165 • “KEY OFF POWER DELAY > OFF” – When this feature is selected, the power window switches, radio, hands–free system (if equipped), and power outlets will remain active for up to 60 minutes after the ignition switch is turned off. Opening a vehicle door will cancel this feature.
Page 166: Compass/Temperature Button
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Compass/Temperature Button Pressing the Compass/Temperature button will return the display to the normal compass/ temperature display. NOTE: Temperature accuracy can be effected from heat soak. For best accuracy, the vehicle should be driven at a speed greater than 20 mph (32 km/h) for several min- utes.
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 metallic objects) until the “CAL” message turns off. The compass will now function normally. Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings.
Page 168: Garage Door Opener - If Equipped
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Turn the ignition switch to the ON/RUN position. 2. Press the menu button until Personal Set- tings is displayed. 3. Press the STEP button until “Compass Variance” is displayed. 4. Press and release RESET button until the proper variance zone is selected according to the variance map.
Page 169: Programming Homelink
WARNING! Vehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while training the transceiver. Exhaust gas can cause seri- ous injury or death. Programming HomeLink Before You Begin If you have not trained any of the HomeLink buttons, erase all channels before you begin training.
Page 170 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the EVIC display states “DID NOT TRAIN” repeat Step 3. If the signal is too weak, replace the battery in the original hand-held transmitter. It may take up to 30 seconds, or longer in rare cases. The garage door may open &...
Page 171: Gate Operator/Canadian Programming
1 — Garage Door Opener 2 — Training Button 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer. NOTE: There are 30 seconds in which to initiate the next step after the “Learn”...
Page 172: Using Homelink
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner. It may be helpful to unplug the device during the cycling process to prevent possible overheating of the garage door or gate motor.
Page 173: Security
3. Without releasing the button, proceed with PRO- GRAMMING HOMELINK Step #2 and follow all remain- ing steps. Security It is advised to erase all channels before you sell or turn in your vehicle. To do this, press and hold the two outside buttons for 20 seconds until the EVIC message states “CHANNELS CLEARED.”...
Page 174: Power Sunroof - If Equipped
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The transmitter has been tested and it complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compli- ance could void the user’s authority to operate the device.
Page 175: Express Open Feature
Express Open Feature During the Express Open operation, any movement of the switch will stop the sunroof and it will remain in a partial open position. Again, momentarily pressing the switch rearward will activate the Express Open Feature. To close the sunroof, hold the switch in the forward position.
Page 176: Wind Buffeting
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof. You could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passengers are properly secured too.
Page 177: Electrical Power Outlets
ELECTRICAL POWER OUTLETS This vehicle has three auxiliary power outlets that can provide up to 20 Amps of current for accessories de- signed for use with the standard power outlet adapters. The outlet located in the lower portion of the instrument panel has a snap on plastic cap so that it can be covered when not in use.
Page 178 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: When the Inverter Switch is pressed, there will be a delay of approximately 1 second before the inverter status indicator turns ON. The status Indicator of the AC power inverter indicates whether the inverter is produc- ing AC power.
Page 179: Electrical Outlet Use With Engine Off (Battery Fed Configuration)
115V Inverter Plug UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Electrical Outlet Use With Engine OFF (Battery Fed Configuration) CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e. cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
Page 180 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reconfiguring Power Outlets To reconfigure the outlets, be sure the ignition is OFF before removing the fuse. The reconfigurable fuse loca- tion is a special design that allows the fuse to be installed in two different ways.
Page 181: Floor Console
FLOOR CONSOLE Floor Console Features The Floor Console between the driver’s and front pas- senger’s seat, has the following features: • Miscellaneous storage compartments • Flexible cup holder inserts • Portable phone storage bin • Portable phone cord routing between lid and base on forward edge •...
Page 182: Rear Floor Console Features - If Equipped
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE third row occupants. The four cupholders located in the center console may be removed for cleaning. Power Outlet and Portable Phone Storage The console is equipped with a power outlet, portable phone storage bin, and phone cord routing. The phone storage bin can be used when easy access to the phone is needed.
Page 183: Factory Installed Roof Luggage Rack
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 FACTORY INSTALLED ROOF LUGGAGE RACK Rear Floor Console To access the storage bin, lift up on the console door latch. The load carried on the roof when equipped with a luggage rack must not exceed 68 kg (150 lbs.), and should be uniformly distributed over the cargo area.
Page 184 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The side rails between the stantions should be used to tie down cargo. Check the straps frequently to be sure that the load remains securely attached. NOTE: Crossbars are offered by Mopar accessories. External racks do not increase the total load carrying capacity of the vehicle.
Page 185: Cargo Management System-If Equipped
WARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the roof rack Cautions when carrying cargo on your roof rack. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 CARGO MANAGEMENT SYSTEM—IF EQUIPPED The cargo management system consists of a removable...
Page 186 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the side cover, pull on the cover latch, and attach the cord to the upper cargo net hook. To open the main cover, pull up on the latch, and attach the cord to the rear seat head restraint post. To open the Cargo divider, lift up on the cargo divider handles, raising the doors to the full open position.
Page 187: Instrument Panel And Controls
INSTRUMENT PANEL AND CONTROLS CONTENTS Instruments And Controls ....191 Instrument Cluster ..... . 192 Instrument Cluster Description .
Page 188 188 INSTRUMENT PANEL AND CONTROLS Sales Code RES — AM/FM Stereo Radio With CD Player (MP3 AUX Jack) ....209 Operating Instructions - Radio Mode ..209 Operation Instructions - CD Mode For CD And MP3 Audio Play .
Page 189 List Or Browse Mode ....243 Video Entertainment System (Sales Code XRV) — If Equipped ... . 244 Satellite Radio —...
Page 190 190 INSTRUMENT PANEL AND CONTROLS Air Conditioning Operation ....252 Front Blower Control ....252 Front Mode Control .
Page 191: Instruments And Controls
INSTRUMENT PANEL AND CONTROLS 191 INSTRUMENTS AND CONTROLS...
Page 192: Instrument Cluster
192 INSTRUMENT PANEL AND CONTROLS Instrument Cluster...
Page 193: Instrument Cluster Description
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gage The fuel gauge shows level of fuel in tank when ignition switch is in the ON position. 2. Temperature Gage The temperature gage indicates engine coolant temperature. Any reading within the normal range indicates that the cooling system is operat- ing satisfactorily.
Page 194 194 INSTRUMENT PANEL AND CONTROLS left/right turn signal is left on with the engine RPM vehicle speed greater than 15 mph (24 km/h) for more than one mile. 4. Low Fuel Warning Light This indicator lights when the fuel gauge reads 1/16 of a tank or less.
Page 195 WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant. You may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, see Section 7 of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph.
Page 196 196 INSTRUMENT PANEL AND CONTROLS illuminates and the ABS is switched off. When the voltage is above this value again, the malfunction indi- cator light should go out and the ABS is operational. If the malfunction indicator light stays illuminated, have the system checked at your authorized dealer as soon as possible.
Page 197 The two trip odometers show individual trip mileage. To switch from odometer to trip odometers, press and release the Trip Odometer button. To reset a trip odometer, display the desired trip odom- eter to be reset then push and hold the button until the display resets (approximately 2 seconds).
Page 198 198 INSTRUMENT PANEL AND CONTROLS Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster.
Page 199 ESP/TCS Indicator Light starts to flash as soon as the tires lose traction and the ESP system becomes active. The ESP/TCS Indicator Light also flashes when TCS is active. If the ESP/TCS Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible.
Page 200 200 INSTRUMENT PANEL AND CONTROLS have the bulb repaired promptly. If the light stays on, it may be an indication that the parking brake has not been released, or there is a low brake fluid level. If the light remains on when the parking brake has been disengaged, and the fluid level is at the full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or a problem with the Brake Booster.
Page 201 23. Malfunction Indicator Light This light is part of an onboard diagnostic system which monitors the emissions and engine control system. If the vehicle is ready for emissions testing the light will come on when the ignition is first turned on and remain on, as a bulb check, until the engine is started.
Page 202 202 INSTRUMENT PANEL AND CONTROLS As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires are significantly under-inflated. Ac- cordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
Page 203 CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
Page 204: Electronic Digital Clock
204 INSTRUMENT PANEL AND CONTROLS 30. 4LOW Indicator Indicates transfer case is in 4LOW position. 31. Odometer/Trip Odometer Button Press this button to toggle between the odometer and the trip odometer display. Holding the button in resets the trip odometer reading. ELECTRONIC DIGITAL CLOCK The clock and radio each use the display panel built into the radio.
Page 205: Radio General Information
RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception under most operating conditions. Like any system, however, car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. To help you understand and save you concern about these “ap- parent”...
Page 206: Sales Code Ren - Multimedia System - If Equipped
206 INSTRUMENT PANEL AND CONTROLS will remain active for up to 10 minutes after the ignition switch has been turned off. Opening a vehicle front door will cancel this feature. SALES CODE REN — MULTIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate.
Page 207: Operating Instructions - Satellite Radio (If Equipped)
Operating Instructions — Satellite Radio (If Equipped) Refer to your Radio Specific User’s Manual for detailed operating instructions. Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual for detailed operating instructions. Clock Setting Procedure Setting the Clock 1.
Page 208 208 INSTRUMENT PANEL AND CONTROLS 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” Touch the screen where the words “Daylight Savings” are dis- played to change the current setting. Show Time if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off.
Page 209: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
SALES CODE RES — AM/FM STEREO RADIO WITH CD PLAYER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. RES Radio (Non-Satellite Model Shown - With Satellite Similar) INSTRUMENT PANEL AND CONTROLS 209 Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Page 210 210 INSTRUMENT PANEL AND CONTROLS to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button Pressing the SCAN button causes the tuner to search for the next listenable station in AM or FM frequencies,...
Page 211 3. After adjusting the hours, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE control knob. Press the TUNE control knob to save time change. 5.
Page 212 212 INSTRUMENT PANEL AND CONTROLS Press the rotary TUNE control knob a third time and TREBLE will display. Turn the TUNE control knob to the right or left to increase or decrease the Treble tones. Press the rotary TUNE control knob a fourth time and BALANCE will display.
Page 213 16 Digit-Character Program Type Nostalgia Nostalga Oldies Personality Public Rhythm and Blues Religious Music Rel Musc Religious Talk Rock Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency Display station with the same selected Music Type name.
Page 214 214 INSTRUMENT PANEL AND CONTROLS AM and FM Buttons Press the buttons to select AM or FM Modes. SET Button — To Set the Push-Button Memory When you are receiving a station that you wish to commit to push-button memory, press the SET button. The symbol SET 1 will now show in the display window.
Page 215: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
Operation Instructions - CD MODE for CD and MP3 Audio Play NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: This Radio is capable of playing compact discs (CD), recordable compact discs (CD-R), rewritable com- pact discs (CD-RW) compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks.
Page 216 216 INSTRUMENT PANEL AND CONTROLS EJECT Button - Ejecting a CD Press the EJECT button to eject the CD. If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it.
Page 217: Notes On Playing Mp3 Files
RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play. This feature plays the selections on the compact disc in random order to provide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected track.
Page 218 218 INSTRUMENT PANEL AND CONTROLS • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator 3-character extension) • Level 2: 31 (including a separator 3-character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files).
Page 219: List Button (Cd Mode For Mp3 Play)
Playlist files are not supported. MP3 Pro files are not supported. Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Page 220 220 INSTRUMENT PANEL AND CONTROLS Press the INFO button once more to return to elapsed time priority mode. Press and hold the INFO button for 3 seconds or more and radio will display song titles for each file. Press and hold the INFO button again for 3 seconds to return to elapsed time display.
Page 221: Sales Code Req - Am/Fm Stereo Radio
SALES CODE REQ — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of your radio faceplate. REQ Radio INSTRUMENT PANEL AND CONTROLS 221 Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
Page 222 222 INSTRUMENT PANEL AND CONTROLS will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to search for the next listenable station, in AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next.
Page 223 3. After adjusting the hours, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE control knob. Press the TUNE control knob to save time change. 5.
Page 224 224 INSTRUMENT PANEL AND CONTROLS Press the rotary TUNE control knob a third time and TREBLE will display. Turn the TUNE control knob to the right or left to increase or decrease the Treble tones. Press the rotary TUNE control knob a fourth time and BALANCE will display.
Page 225 16 Digit-Character Program Type Nostalgia Nostalga Oldies Personality Public Rhythm and Blues Religious Music Rel Musc Religious Talk Rock Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Talk Top 40 Weather By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency Display station with the same selected Music Type name.
Page 226 226 INSTRUMENT PANEL AND CONTROLS • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote control to scroll up and down the menu (If Equipped). •...
Page 227 • Player Defaults - Selecting this item will allow the user to scroll through the following items, and set defaults according to customer preference. Menu Language — If Equipped Selecting this item will allow the user to choose the default startup DVD menu language (effective only if language supported by disc).
Page 228 228 INSTRUMENT PANEL AND CONTROLS Audio DRC — If Equipped Selecting this item will allow the user to limit maximum audio dynamic range - The default is set to High, and under this setting, dialogues will play at 11 db higher than if the setting is Normal.
Page 229: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
window. Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into push-button memory. The stations stored in SET 2 memory can be selected by pressing the push-button twice.
Page 230 230 INSTRUMENT PANEL AND CONTROLS NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the push-button with the corresponding number (1-6) where the CD is being loaded.
Page 231: Notes On Playing Mp3/Wma Files
SCAN Button (CD MODE) Press the Scan button to scan through each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display from a large CD playing time display to a small CD playing time display. RW/FF (CD MODE) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or...
Page 232 232 INSTRUMENT PANEL AND CONTROLS The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: •...
Page 233 MPEG Sampling Fre- Specification quency (kHz) MPEG-1 Audio 48, 44.1, 32 Layer 3 MPEG-2 Audio 24, 22.05, 16 Layer 3 Sampling Fre- Specification quency (kHz) 44.1 and 48 ID3 Tag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios.
Page 234: List Button
234 INSTRUMENT PANEL AND CONTROLS LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE control knob. Selecting a folder by pressing the TUNE control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does not contain playable files).
Page 235 SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press this button to change the display from elapsed playing time to time of day. The time of day will display for 5 seconds. RW/FF (Auxiliary Mode) No function.
Page 236: Sales Code Rer - Multimedia System - If
236 INSTRUMENT PANEL AND CONTROLS Macrovision This product incorporates copyright protection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Page 237: Operating Instructions - Satellite Radio
music and photos from CDs or through the USB port. While the Gracenote database finds the artist, track, and title for the music. An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers. For vehicles equipped with the Vehicle Entertainment System (VES), separate audio outputs allow passengers to listen to the car speakers while different audio tracks play...
Page 238 238 INSTRUMENT PANEL AND CONTROLS Changing the Time Zone 1. Turn on the system. 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. If the words “Time: GPS Time” are displayed at the top of the screen, proceed to Step 4.
Page 239 2. Touch the screen where the time is displayed. The clock setting menu will appear on the screen. If the words “Time: User Clock” are displayed at the top of the screen, proceed to Step 4. Otherwise, proceed to Step 3. 3.
Page 240: Universal Consumer Interface (Uci) - If Equipped
240 INSTRUMENT PANEL AND CONTROLS UNIVERSAL CONSUMER INTERFACE (UCI) — IF EQUIPPED NOTE: This section is for sales code RES and REQ radios only with UConnect.™ For sales code REN touch screen radio, refer to the separate User’s Manual. This feature allows you to plug in an iPod into the vehicle’s sound system through a connector (UCI connec- tor) using an optional connection cable (available through Mopar ).
Page 241: Play Mode
Play Mode When switched to UCI mode the iPod will be in Play mode. In this Play mode , you may use the following buttons on the radio faceplate to control the iPod and display data: TUNE/SCROLL Knob Use the “TUNE/SCROLL” knob to go to the next or previous track.
Page 242 242 INSTRUMENT PANEL AND CONTROLS previous track in the list, if you press this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list.
Page 243: List Or Browse Mode
List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll through the list of menus and tracks on the iPod . TUNE/SCROLL Knob In the List mode, the “TUNE/SCROLL” knob functions in a similar manner as the scroll wheel on the iPod .
Page 244: Video Entertainment System (Sales Code Xrv) - If Equipped
244 INSTRUMENT PANEL AND CONTROLS To exit the List mode without selecting a track, press the same preset button again to go back to Play mode. LIST Button Pressing the “LIST” button will take to the top level menu of the iPod . This takes you to the same top level menu as on your iPod .
Page 245: System Activation
System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of SIRIUS audio service that is included with the factory- installed satellite radio system in your vehicle. Sirius will contact you to supply a welcome kit and to confirm subscription information, including the set up of your on-line listening account at no additional charge.
Page 246: Selecting Satellite Mode In Ref, Raq, And Rak Radios
246 INSTRUMENT PANEL AND CONTROLS ESN/SID Access with RAQ and RAK Radios With the ignition switch in the ACCESSORY position and the radio OFF, press the CD Eject and TIME buttons simultaneously for 3 seconds. All twelve ESN/SID num- bers will display. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF, or 5 minutes has passed since any button was pushed.
Page 247: Selecting A Channel
Selecting a Channel Press and release the SEEK or TUNE knob to search for the next channel. Press the top of the button to search up and the bottom of the button to search down. Holding the TUNE button causes the radio to bypass channels until the button is released.
Page 248: Pty Button Seek
248 INSTRUMENT PANEL AND CONTROLS NOTE: Pressing the SEEK or SCAN button, while performing a music type scan, will change the channel by one and stop the search. Pressing a pre-set memory button during a music type scan, will call up the memory channel and stop the search.
Page 249: Remote Sound System Controls - If Equipped
REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. The left- and right-hand controls are rocker-type switches with a push-button in the center of each switch. Reach behind the steering wheel to access the switches.
Page 250: Left-Hand Switch Functions For Media (I.e. Cd) Operation
250 INSTRUMENT PANEL AND CONTROLS Left-Hand Switch Functions for Media (i.e. CD) Operation • Press the top of the switch once to listen to the next track. • Press the bottom of the switch once either to listen to the beginning of the current track or to listen to the beginning of the previous track if it is within one second after the current track begins to play.
Page 251: Radio Operation And Cellular Phones
NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e. scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have theft protection encoding. Try a known good disc before considering disc player service. RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from...
Page 252: Air Conditioning Operation
252 INSTRUMENT PANEL AND CONTROLS Air Conditioning Operation To turn the air conditioning On or Off perform the following steps: • Position the mode control button to the desired airflow setting. • Set the front blower control to any desired speed. •...
Page 253: Front Mode Control
Front Mode Control The mode control allows you to choose from several patterns of air distribution. NOTE: To improve your selection choices, the system allows you to operate at intermediate positions between the major modes. These intermediate positions are iden- tified by the small dots and give an even blend of both modes.
Page 254 254 INSTRUMENT PANEL AND CONTROLS Bi-Level Air flows through the outlets located in the instru- ment panel and those located on the floor. NOTE: There is a difference in temperature between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets.
Page 255: Rear Temperature Control - If Equipped
Temperature Control The temperature of the air is controlled by a slide located on the top center of the control panel. Move the slide left or right to change the temperature. The blue area of the scale indicates cooler temperatures while the red area indicates warmer temperatures.
Page 256: Rear Window Defrosting And Rear Window Washer/Wiper
256 INSTRUMENT PANEL AND CONTROLS mode on the front control will give you air from the outlets in the headliner in the rear. Floor mode in the front will give you floor in the rear. Rear Window Defrosting and Rear Window Washer/Wiper See the “Rear Window Features”...
Page 257: Automatic Control
Automatic Control The ATC system can maintain a steady comfort level in various weather conditions with a simple operation: • Select your desired temperature setting by pressing the + or - side of the TEMP rocker switches. A digital temperature setting for driver and passenger will be displayed.
Page 258: Manual Control (Atc)
258 INSTRUMENT PANEL AND CONTROLS feature. Refer to the Overhead Console-Customer Pro- grammable Features. The mode will also be shown in the display and will change as required during automatic operation. NOTE: The system can be put into recirculate mode without affecting ATC operation.
Page 259 engine speed or power may be noticed when the com- pressor cycles. This is a normal occurrence since the compressor will cycle on and off to maintain comfort and improve fuel economy. Recirculate Button Press this button to recirculate the air inside the vehicle.
Page 260 260 INSTRUMENT PANEL AND CONTROLS Bi-Level Air flows through the outlets located in the instru- ment panel and those located on the floor. NOTE: There is a difference in temperature between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets.
Page 261: Rear Zone Climate Control - If Equipped
REAR OFF This turns the rear system off. The control will return to the front system display after approximately 5 seconds if no buttons are pushed while in one of the rear system displays. You may also return to the front system display sooner by pushing any button except the POWER/FAN knob, the rear button, the driver/passenger temp rocker buttons.
Page 262: Rear Rotary Temperature Control
262 INSTRUMENT PANEL AND CONTROLS The rear compartment control uses two rotary knobs: one for the temperature control and the other for the fan speed control. The mode for the rear air conditioning and heating system is always controlled by the front control unit.
Page 263: Front Unit To Rear Unit Chart
NOTE: For best operation, make sure that ventilation grilles located in the rear storage area are not obstructed by stowed articles. INSTRUMENT PANEL AND CONTROLS 263 Front Unit to Rear Unit Chart If the Front Control is Rear Airflow will come selected from Panel...
Page 264 264 INSTRUMENT PANEL AND CONTROLS and adjust the temperature control and blower speed as necessary to maintain comfort. For high humidity condi- tions it may be necessary to remain in the Recirculation mode to maintain comfort. Window Fogging Windows will fog on the inside when the humidity inside the vehicle is high.
Page 265: Operating Tips Chart
INSTRUMENT PANEL AND CONTROLS 265 Operating Tips Chart...
Page 266: Rear Window Features
266 INSTRUMENT PANEL AND CONTROLS REAR WINDOW FEATURES Rear Window Wiper/Washer A rotating switch located on the climate control panel turns the rear wiper On or Off. Pressing the rotating switch inward activates the rear window washer. Rotating the switch will enable one of five intermittent delay times for the rear wiper.
Page 267: Rear Window Defrosting
If the rear wiper is operating when the ignition is turned off, the wiper will automatically return to the “Park” position. When the vehicle is restarted, the wiper will resume operation. Rear Window Defrosting A push-button type switch is located in the climate control panel.
Page 269 STARTING AND OPERATING CONTENTS Starting Procedures ..... 273 Automatic Transmission ....273 Normal Starting .
Page 270 270 STARTING AND OPERATING Brake System ......291 Four-Wheel Anti-Lock Brake System (ABS) . . . 291 Power Steering .
Page 271 Supplemental Tire Pressure Information — If Equipped ......322 Tire Chains ......322 Snow Tires .
Page 272 272 STARTING AND OPERATING Cruising Range ..... . . 342 Replacement Parts ..... 342 Maintenance .
Page 273: Starting Procedures
STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! Be sure to turn off the engine and remove the key from the ignition switch if you want to rest or sleep in your car.
Page 274 274 STARTING AND OPERATING Tip Start Feature Your vehicle has a “Tip Start” starting system. With “Tip Start” the driver does not need to hold the key in the ’Start’ position until the vehicle starts, but can release the key (still in the ignition) and the vehicle will continue through the start cycle.
Page 275 WARNING! Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic trans- mission cannot be started this way. Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
Page 276: Engine Block Heater - If Equipped
276 STARTING AND OPERATING ENGINE BLOCK HEATER – IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt AC electrical outlet with a grounded, three wire extension cord. The 3.7L/4.7L engine block heater cord is located at the front of the engine compartment near the radiator cap.
Page 277 “P” Park Supplements parking brake by locking the transmission. Engine can be started in this range. Never use Park while vehicle is in motion. Apply parking brake when leaving vehicle in this range. Always apply parking brake first, then place selector in Park position. WARNING! Your vehicle could move and injure you and others if it is not completely in P (Park).
Page 278 278 STARTING AND OPERATING “R” Reverse Use this range only after the vehicle has come to a complete stop. “N” Neutral Shift to Neutral when vehicle is standing for prolonged periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle.
Page 279 Overdrive Operation The overdrive automatic transmission contains an elec- tronically controlled fourth and fifth (if equipped) speed (Overdrive). The transmission will automatically shift from Drive to Overdrive if the following conditions are present: • the transmission selector is in Drive; •...
Page 280 280 STARTING AND OPERATING The transmission will downshift from Overdrive to Drive if the accelerator pedal is fully depressed at vehicle speeds above approximately 35 mph (56 km/h). When To Use “TOW/HAUL” Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the “TOW/HAUL”...
Page 281: Four-Wheel Drive Operation
light throttle. It engages at higher speeds under heavier acceleration. This may result in a slightly different feeling or response during normal operation in high gear. When the vehicle speed drops below a calibrated speed, or during acceleration, the clutch automatically and smoothly disengages.
Page 282: Nv 244 Generation Ii Transfer Case Operating Information / Precautions
282 STARTING AND OPERATING Because four-wheel-drive provides improved traction, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road conditions permit. Normal Four-Wheel-Drive High Range - Employs inter- axle differential. Allows front and rear wheels to rotate at different speeds.
Page 283 LOCK and 4WD LOW positions on dry hard surfaced roads may cause increased tire wear and damage to the driveline components. The transfer case Neutral (N) position is selected by depressing the recessed button located on the lower left hand corner of the 4WD Control Switch. NOTE: The transfer case Neutral (N) position is to be used for recreational towing only.
Page 284 284 STARTING AND OPERATING equal for the shift to take place. Shifting while only the front or rear wheels are spinning can cause damage to the transfer case. When operating your vehicle in 4WD LOW, the engine speed is approximately three times that of the 4WD or 4WD LOCK positions at a given road speed.
Page 285 For additional information on the appropriate use of each transfer case mode position see the following informa- tion: Normal Four-Wheel-Drive High Range - Employs inter- axle differential. Allows front and rear wheels to rotate at different speeds. All road surfaces. 4WD LOCK Four-Wheel-Drive Lock (4WD LOCK)- Locks the transfer case inter-axle differential.
Page 286: Shifting Procedure - Nv 244 Generation Ii
286 STARTING AND OPERATING Shifting Procedure - NV 244 Generation II Transfer Case NOTE: The 4x4 system will not allow shifts between 4WD/ 4WD LOCK if the rear wheels are spinning (no traction). In this situation a position indicator light will flash and the original position indicator light will remain ON.
Page 287: Driving On Slippery Surfaces
3. While still rolling, rotate the transfer case control switch to the desired position. 4. After the position indicator light has stopped flashing, shift the transmission back into gear. Alternate Procedure 1. Bring the vehicle to complete stop. 2. With the key ON and the engine either OFF or RUNNING, shift the transmission into NEUTRAL.
Page 288: Driving Through Water
288 STARTING AND OPERATING 3. Replace tires when tread wear indicators first become visible. 4. Keep tires properly inflated. 5. Maintain sufficient distance between your vehicle and the car in front to avoid a collision in a sudden stop. DRIVING THROUGH WATER Driving through water more than a few inches deep will require extra caution to ensure safety and prevent dam- age to your vehicle.
Page 289 CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water and if there are any obstacles in the way before driving through the standing water.
Page 290: Parking Brake
290 STARTING AND OPERATING PARKING BRAKE The foot operated parking brake is positioned below the lower left corner of the instrument panel. To release the parking brake, pull the parking brake release handle. Parking Brake Be sure the parking brake is firmly set when parked and the gear-shift lever is in PARK position.
Page 291: Brake System
WARNING! • Always fully apply the parking brake when leav- ing your vehicle, or vehicle may roll and cause damage or injury. Also be certain to leave an automatic transmission in Park. Failure to do so may cause the vehicle to roll and cause damage or injury.
Page 292 292 STARTING AND OPERATING surfaces. All vehicle wheels and tires must be the same size and type and tires must be properly inflated to produce accurate signals for the computer. WARNING! Significant over or under inflation of tires, or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness.
Page 293 WARNING! Anti-Lock Brake Systems contain sophisticated elec- tronic equipment. It may be susceptible to interfer- ence caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. Installation of such equipment should be done by qualified professionals.
Page 294: Power Steering
294 STARTING AND OPERATING When you are in a severe braking condition involving use of the Anti-lock Brake system, you will experience some pedal drop as the vehicle comes to a stop. This is the result of the system reverting to the base brake system.
Page 295: Electronic Brake Control System
WARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and should be avoided when pos- sible.
Page 296: Bas (Brake Assist System)
296 STARTING AND OPERATING WARNING! • Anti-lock system (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. •...
Page 297 applies optimum pressure to the brakes in emergency braking conditions. This can help reduce braking dis- tances. The BAS complements the antilock brake system (ABS). Applying the brakes very quickly results in the best BAS assistance. To receive the benefit of the system, you must apply continuous braking pressure during the stopping sequence.
Page 298: Tcs (Traction Control System)
298 STARTING AND OPERATING TCS (Traction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressure is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability.
Page 299: Esp (Electronic Stability Program)
WARNING! Many factors, such as vehicle loading, road condi- tions and driving conditions, influence the chance that wheel lift or rollover may occur. • ERM can not prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles.
Page 300 300 STARTING AND OPERATING • Understeer - when the vehicle is turning less than appropriate for the steering wheel position. ESP/TCS Indicator Light The ESP/TCS Indicator Light starts to flash as soon as the tires lose traction and the TCS or ESP system becomes active.
Page 301 4WD/4WD LOCK or 2WD Models This is the normal operating mode for ESP in 4WD LOCK and in 2WD vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted from 4WD LOW or neutral back to 4WD LOCK, the ESP system will be in this mode.
Page 302 302 STARTING AND OPERATING mode by pressing the ESP Control Switch. Once the situation requiring ESP to be switched to the “Partial Off” mode is overcome, turn ESP on by momentarily depress- ing the “ESP Control Switch”. This may be done with the vehicle is in motion.
Page 303 WARNING! In the Partial Off mode, the engine torque reduction and stability features are desensitized. Therefore, the enhanced vehicle stability offered by ESP is unavailable. ESP/BAS Warning Lamp and ESP/TCS Indicator Light The malfunction indicator for the ESP is combined with the BAS indicator.
Page 304: Multi Displacement System (Mds) - 5.7L Engine Only
304 STARTING AND OPERATING TSC (Trailer Sway Control) TSC uses sensors in the vehicle to recognize a swaying trailer and will take the appropriate actions to attempt to stop the sway. The system will reduce engine power and apply individual brakes that will counter act the sway of the trailer.
Page 305: Tire Safety Information
TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. STARTING AND OPERATING 305 • European Metric tire sizing is based on European design standards.
Page 306 306 STARTING AND OPERATING Tire Sizing Chart Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
Page 307 Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved un- der specified operating conditions (i.e.
Page 308: Tire Identification Number (Tin)
308 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Page 309: Tire Loading And Tire Pressure
Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire Placard Location STARTING AND OPERATING 309 Tire and Loading Information Placard Tire and Loading Information This placard tells you important information about the: 1) number of people that can be carried in the vehicle...
Page 310 310 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information”...
Page 311 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if “XXX” amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (since 5 x 150 = 750, and 1400 –...
Page 312 312 STARTING AND OPERATING...
Page 313: Tires - General Information
WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
Page 314: Tire Inflation Pressures
314 STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation, also increases tire rolling resistance and results in higher fuel consump- tion.
Page 315 check tire pressure. Do not make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem.
Page 316: Radial-Ply Tires
316 STARTING AND OPERATING Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important.
Page 317: Compact Spare Tire - If Equipped
Compact Spare Tire — If Equipped The compact spare is for temporary emergency use with radial tires. It is engineered to be used on your style vehicle only. Since this tire has limited tread life, the original tire should be repaired (or replaced) and rein- stalled at the first opportunity.
Page 318: Tire Spinning
318 STARTING AND OPERATING original equipped tire on the front or rear axle of your vehicle, but it is not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same tire, replace (or repair) the original tire and reinstall on the vehicle at the first opportunity.
Page 319: Tread Wear Indicators
Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. STARTING AND OPERATING 319 These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 inch (2 mm).
Page 320: Replacement Tires
320 STARTING AND OPERATING WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. You could lose control and have an accident resulting in serious injury or death.
Page 321: Alignment And Balance
WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspen- sion dimensions and performance characteristics, resulting in changes to steering, handling, and brak- ing of your vehicle.
Page 322: Supplemental Tire Pressure Information - If Equipped
322 STARTING AND OPERATING Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. SUPPLEMENTAL TIRE PRESSURE INFORMATION — IF EQUIPPED A light load vehicle condition is defined as two passen- gers {150 lbs (68 kg) each} plus 200 lbs (91kg) of cargo.
Page 323: Snow Tires
These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. Tire chain use is permitted only on the rear tires of your truck. NOTE: The use of class “S” chains is permitted on your vehicle with P245/70R17 tires. CAUTION! Do not use tire chains on 4x4 trucks equipped with tires other than P245/70R17 tires.
Page 324: Tire Rotation Recommendations
324 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates and tend to develop irregular wear pat- terns.
Page 325: Tire Pressure Monitor System (Tpms) - If Equipped
TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED The Tire Pressure Monitoring System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure (the placard is lo- cated on the drivers side B-pillar). The tire pressure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C).
Page 326 326 STARTING AND OPERATING For example, your vehicle has a recommended cold (parked for more than 3 hours) placard of 33 (227 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 28 psi (193 kPa), a temperature drop to 20°F (-7°C) will decrease the tire pressure to approxi- mately 24 psi (165 kPa).
Page 327: Base System - If Equipped
NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. •...
Page 328 328 STARTING AND OPERATING • Tire Pressure Monitoring Telltale Lamp The Tire Pressure Monitoring Telltale Lamp will illuminate in the instrument cluster, and an au- dible chime will be activated when one or more of the four active road tire pressures are low. Should this occur, you should stop as soon as possible, check the inflation pressure of each tire on your vehicle, and inflate each tire to the vehicle’s recommended cold placard...
Page 329: Premium System - If Equipped
limit, upon the next ignition key cycle, a chime will sound and the TPM Telltale Light will still turn ON due to the low tire. 3. However, after driving the vehicle for up to 10 min- utes above 15 mph (25 km/h), the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid.
Page 330 330 STARTING AND OPERATING • Yellow Tire Pressure Monitoring Telltale Light. Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Lamp will illumi- nate in the instrument cluster, and an audible chime will be activated when one or more of the four active road tire pressures are low.
Page 331 affects radio wave signals. 3) Lots of snow or ice around the wheels or wheel housings. 4) Using tire chains on the vehicle. 5) Using wheels/tires not equipped with TPM sensors. NOTE: Your vehicle is equipped with a non-matching full size spare wheel and tire assembly. 1.
Page 332: General Information
332 STARTING AND OPERATING The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada.
Page 333: Reformulated Gasoline
premium gasoline will not provide a benefit over high quality regular and mid-grade gasolines, and in some circumstances may result in poorer performance. Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at high speeds can cause damage and immediate service is required.
Page 334: Mmt In Gasoline
334 STARTING AND OPERATING CAUTION! DO NOT use gasoline containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. NOTE: 4.7L Engine — If Equipped , is now rated for E85 Ethanol use.
Page 335: Materials Added To Fuel
Materials Added To Fuel All gasolines sold in the United States are required to contain effective detergent additives. Use of additional detergents or other additives is not needed under normal conditions and would result in unnecessary cost. There- fore, you should not have to add anything to the fuel. STARTING AND OPERATING 335 Fuel System Cautions CAUTION!
Page 336: Carbon Monoxide Warnings
336 STARTING AND OPERATING NOTE: Intentional tampering with emissions control sys- tems can result in civil penalties being assessed against you. Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: •...
Page 337 CAUTION! A poorly fitting gas cap may cause the Malfunction Indicator Light to turn on. CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
Page 338: Loose Fuel Filler Cap (Gas Cap) Message
338 STARTING AND OPERATING WARNING! A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. You could be burned. Always place gas containers on the ground while filling. Loose Fuel Filler Cap (Gas Cap) Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is loose, improperly installed, or damaged.
Page 339: Flexible Fuel - If Equipped
STARTING AND OPERATING 339 FLEXIBLE FUEL — IF EQUIPPED E-85 General Information The information in this section is for Flexible Fuel ve- hicles only. These vehicles can be identified by the unique fuel filler door label that states Ethanol (E-85) or Un- leaded Gasoline Only.
Page 340: Ethanol Fuel (E-85)
340 STARTING AND OPERATING CAUTION! Only vehicles with the E-85 fuel filler cap (gas cap) can operate on E-85. E-85 Badge ETHANOL FUEL (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury.
Page 341: Selection Of Engine Oil For Flexible Fuel
For best results, a refueling pattern that alternates be- tween E-85 and unleaded gasoline should be avoided. When you do switch fuels, it is recommended that • you do not switch when the fuel gauge indicates less than 1/4 full •...
Page 342: Cruising Range
342 STARTING AND OPERATING increase in the time it takes for your engine to start, and a deterioration in drivability (sags and/or hesitations) until the engine is fully warmed up. Cruising Range Because E-85 fuel contains less energy per gallon than gasoline, you will experience an increase in fuel con- sumption.
Page 343: Vehicle Loading
VEHICLE LOADING Certification Label As required by National Highway Traffic Safety Admin- istration Regulations, your vehicle has a certification label affixed to the driver’s side door. STARTING AND OPERATING 343 This label contains the month and year of manufacture, Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR) front and rear, and Vehicle Identification Number (VIN).
Page 344: Curb Weight
344 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) The GAWR is the maximum permissible load on the front and rear axles. The load must be distributed in the cargo area so that the GAWR of each axle is not exceeded. Each axle GAWR is determined by the component in the system with the lowest load carrying capacity (axle, springs, tires, or wheels).
Page 345 then be determined separately to be sure that the load is properly distributed over front and rear axle. Weighing the vehicle may show that the GAWR of either the front or rear axles has been exceeded but the total load is within the specified GVWR.
Page 346: Trailer Towing
346 STARTING AND OPERATING after the vehicle has been weighed both in its curb weight condition, and in its loaded and ready for operation condition. Gross Vehicle Weight Rating (GVWR) 6500 LBS. TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle.
Page 347 Gross Trailer Weight (GTW) The gross trailer weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its loaded and ready for operation condition. The recom- mended way to measure GTW is to put your fully loaded trailer on a vehicle scale.
Page 348 348 STARTING AND OPERATING Frontal Area The maximum height and maximum width of the front of a trailer. TSC (Trailer Sway Control) – If Equipped • Trailer Sway Control – Electronic TSC uses sensors in the vehicle to recognize a swaying trailer and will take the appropriate actions to attempt to stop the sway.
Page 349 Weight-Distributing Hitch A weight-distributing system works by applying lever- age through spring (load) bars. They are typically used for heavier loads, to distribute trailer tongue weight to the tow vehicle’s front axle and the trailer axle(s). When used in accordance with the manufacturers’ directions, it provides for a more level ride, offering more consistent steering and brake control thereby enhancing towing safety.
Page 350 350 STARTING AND OPERATING Weight Distributing Hitch System Improper Adjustment of Weight Distributing System...
Page 351: Trailer Hitch Classification
Fifth-Wheel Hitch A special high platform with a coupling that mounts over the rear axle of the tow vehicle in the truck bed. Connects a vehicle and fifth-wheel trailer with a coupling king pin. Gooseneck Hitch The gooseneck hitch employs a pivoted coupling arm which attaches to a ball mounted in the bed of a pickup truck.
Page 352: Trailer Towing Weights (Maximum Trailer Weight Ratings)
• http:// www.dodge.com/towing. • http:// www.dodge.ca (Canada). Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
Page 353: Towing Requirements
• The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle.
Page 354 354 STARTING AND OPERATING WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
Page 355 2. GTW 3. GAWR 4. Tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). Towing Requirements — Tires −...
Page 356 356 STARTING AND OPERATING actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg).
Page 357: Towing Tips
NOTE: Do not cut or splice wiring into the vehicles wiring harness. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. 4 - Pin Connector STARTING AND OPERATING 357 7- Pin Connector Towing Tips...
Page 358 358 STARTING AND OPERATING If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. Towing Tips — Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, the “TOW HAUL”...
Page 359: Snowplow
Towing Tips — Cooling System To reduce potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Driving Reduce speed.
Page 360: Recreational Towing (Behind Motorhome, Etc.)
360 STARTING AND OPERATING CAUTION! Using this vehicle for snowplow applications can cause damage to the vehicle. WARNING! Attaching a snowplow to this vehicle could adversely affect performance of the airbag system in an acci- dent. Do not expect that the airbag will perform as described earlier in this manual RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)
Page 361 WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the Neutral (N) position without first fully engaging the parking brake. The transfer case Neutral (N) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move despite the transmission position.
Page 362 362 STARTING AND OPERATING 3. Turn the ignition key to the ON position without starting the engine. 4. Depress brake pedal. 5. Shift automatic transmission to Neutral (N). 6. Using the point of a ballpoint pen or similar object, depress the recessed transfer case Neutral (N) button for 4 seconds.
Page 363 CAUTION! Damage to the transmission may occur if the trans- mission is shifted into Park (P) with the transfer case in Neutral (N) and the engine RUNNING. With the transfer case in Neutral (N) ensure that the engine is OFF prior to shifting the transmission into Park (P) Shifting OUT of Neutral (N) Use the following procedure to prepare your vehicle for normal usage.
Page 364: Equipment Identification Plate
364 STARTING AND OPERATING the 1 second time, then all of the position indicator lights will flash continuously until all requirements are met or until the Neutral (N) button is released. NOTE: The ignition key must be ON for a shift to take place and for the position indicator lights to be operable.
Page 365: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....366 Jacking And Tire Changing ....367 Jack Location .
Page 366: Hazard Warning Flasher
366 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The flasher switch is on the top of the steering column, just behind the steering wheel. Press the flasher switch and all front and rear directional signals will flash intermittently. Press the switch a second time to turn off the emergency flashers.
Page 367: Jacking And Tire Changing
JACKING AND TIRE CHANGING WARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
Page 368: Jacking Instructions
368 WHAT TO DO IN EMERGENCIES JACKING INSTRUCTIONS Removing The Spare Tire The spare tire on your vehicle is located underneath the vehicle in the rear.
Page 369 Remove the spare tire before attempting to jack the truck. 1. Remove the rubber plug from the floor in the cargo area. WHAT TO DO IN EMERGENCIES 369 2. Engage the jack wrench extension to the spare tire winch through the hole in the floor. 3.
Page 370: Tire Changing Procedure
370 WHAT TO DO IN EMERGENCIES Tire Changing Procedure WARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
Page 371 • Block both the front and rear of the wheel diagonally oppo- site the jacking position. For example, if the right front wheel is being changed, block the left rear wheel. • Passengers should not remain in the vehicle when the vehicle is being jacked.
Page 372 372 WHAT TO DO IN EMERGENCIES When changing a rear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as posssible with the drive tubes extending to the rear.
Page 373 WARNING! Raising the vehicle higher than necessary can make the vehicle unstable and cause an accident. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel nuts and pull the wheel off. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel.
Page 374 374 WHAT TO DO IN EMERGENCIES WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle.
Page 375: Jump Starting Procedures
JUMP STARTING PROCEDURES WARNING! • Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or cloth- ing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other. If acid splashes in eyes or on skin, flush the contami- nated area immediately with large quantities of water.
Page 376 376 WHAT TO DO IN EMERGENCIES 4. Connect one end of a jumper cable to the positive terminal of the booster battery. Connect the other end of the same cable to the positive terminal of the discharged battery. WARNING! Do not permit vehicles to touch each other as this could establish a ground connection and personal injury could result.
Page 377: Freeing A Stuck Vehicle
WARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle. FREEING A STUCK VEHICLE If vehicle becomes stuck in snow, sand, or mud, it can often be moved by a rocking motion.
Page 378: Towing A Disabled Vehicle
378 WHAT TO DO IN EMERGENCIES WARNING! Chains are not recommended for freeing a stuck vehicle. Chains may break, causing serious injury or death. WARNING! Stand clear of vehicles when pulling with tow hooks. Tow straps and chains may break, causing serious injury.
Page 379: Four-Wheel Drive Vehicles
Four-Wheel Drive Vehicles The manufacturer recommends towing with all wheels OFF the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of the vehicle raised and the opposite end on a towing dolly. Two-Wheel Drive Vehicles Provided that the transmission is operable, tow with the transmission in Neutral and the ignition key in the OFF position along with the front wheels raised and the rear...
Page 381 MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment 3.7L V6 ....384 Engine Compartment 4.7L V-8 ....385 Engine Compartment 5.7L HEMI V-8 .
Page 382 382 MAINTAINING YOUR VEHICLE Power Steering — Fluid Check ... . 399 Air Conditioner Maintenance ... . . 399 Front Suspension Ball Joints ....400 Drive Shaft Constant Velocity Joints .
Page 383 Center High-Mounted Stoplight ... 437 Fog Lights ......438 Fluids And Capacities .
Page 384: Engine Compartment 3.7L V6
384 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT 3.7L V6...
Page 385: Engine Compartment 4.7L V-8
MAINTAINING YOUR VEHICLE 385 ENGINE COMPARTMENT 4.7L V-8...
Page 386: Engine Compartment 5.7L Hemi V-8
386 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT 5.7L HEMI V-8...
Page 387: Onboard Diagnostic System - Obd Ii
ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emis- sions well within current government regulations.
Page 388: Loose Fuel Filler Cap Message
388 MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is possibly loose, improp- erly installed, or damaged. A loose fuel filler cap message will be displayed in the instrument cluster. Tighten the gas cap until a clicking sound is heard.
Page 389 Your vehicle has a simple ignition key actuated test which you can use prior to going to the test station. To check if your vehicle’s OBD system is ready, you must do the following: 1. Insert your ignition key into the ignition switch. 2.
Page 390: Replacement Parts
390 MAINTAINING YOUR VEHICLE vehicle serviced before going to the I/M station. The I/M station can fail your vehicle because the MIL symbol is on with the engine running. REPLACEMENT PARTS Use of genuine Mopar parts for normal/scheduled maintenance and repairs is highly recommended to in- sure the designed performance.
Page 391: Maintenance Procedures
MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there are fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance. However, if a malfunction of these items does occur, it could adversely affect the engine or vehicle performance.
Page 392 392 MAINTAINING YOUR VEHICLE CAUTION! Overfilling or underfilling the crankcase will cause oil aeration or loss of oil pressure. This could damage your engine. Change Engine Oil Follow the Maintenance Schedule for recommended en- gine oil and filter change intervals. NOTE: Under no circumstances should oil change in- tervals exceed 6,000 miles (10 000 km) or 6 months whichever comes first.
Page 393 Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacture only recommends engine oils that are API certified and meet the requirements of DaimlerChrysler Material Standard MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American...
Page 394: Engine Oil Filter
394 MAINTAINING YOUR VEHICLE Synthetic Engine Oils You may use synthetic engine oils provided the recom- mended oil quality requirements are met, and the recom- mended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oils The manufacture strongly recommends against the addi- tion of any additives (other than leak detection dyes) to the engine oil.
Page 395: Spark Plugs
belt tension can cause belt slippage and failure. Belts should be inspected for evidence of cuts, cracks, glazing, or frayed cords and replaced if there is indication of damage which could result in belt failure. Low generator belt tension can cause battery failure. Also check belt routing to make sure there is no interference between the belts and other engine components.
Page 396: Engine Fuel Filter
396 MAINTAINING YOUR VEHICLE Engine Fuel Filter A plugged fuel filter can cause stalling, limit the speed at which a vehicle can be driven or cause hard starting. Should an excessive amount of dirt accumulate in the fuel tank, frequent filter replacement may be necessary. Catalytic Converter The catalytic converter requires the use of unleaded fuel only.
Page 397: Maintenance Free Battery
WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.
Page 398 398 MAINTAINING YOUR VEHICLE WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water.
Page 399: Maintaining Your Vehicle 399
Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.
Page 400: Front Suspension Ball Joints
400 MAINTAINING YOUR VEHICLE WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information book for further warranty information.
Page 401: Drive Shaft Constant Velocity Joints
Drive Shaft Constant Velocity Joints All four wheel drive models are equipped with four constant velocity joints. Periodic lubrication of these joints is not required. However, the joint boot should be inspected for external leakage or damage periodically. If external leakage or damage is evident, the joint boot and grease should be replaced immediately.
Page 402: Windshield And Rear Window Washers
402 MAINTAINING YOUR VEHICLE Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Windshield and Rear Window Washers The fluid reservoir for the windshield washers and the rear window washer is shared.
Page 403: Cooling System
damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil change.
Page 404 404 MAINTAINING YOUR VEHICLE clean by gently spraying water from a garden hose vertically down the face of the condenser and radiator. Check the coolant recovery bottle tubing for brittle rub- ber, cracking, tears, cuts and tightness of the connection at the bottle and radiator.
Page 405 CAUTION! • Mixing of coolants other than specified HOAT engine coolants may result in engine damage and may decrease corrosion protection. If a non-HOAT coolant is introduced into the cooling system in an emergency, it should be replaced with the speci- fied coolant as soon as possible.
Page 406 406 MAINTAINING YOUR VEHICLE • Use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where...
Page 407 Disposal of Used Engine Coolant Used ethylene glycol based engine coolant is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal rules for your community. To prevent ingestion by animals or children do not store ethylene glycol based engine coolant in open containers or allow it to remain in puddles on the ground.
Page 408 408 MAINTAINING YOUR VEHICLE • Do not overfill the coolant recovery bottle. • Check coolant freeze point in the radiator and in the coolant recovery bottle. If antifreeze needs to be added, contents of coolant recovery bottle must also be protected against freezing.
Page 409: Emission Related Components
Emission Related Components Fuel System Hoses And Vapor/Vacuum Harnesses When the vehicle is serviced for scheduled maintenance, inspect surface of hoses and nylon tubing for evidence of heat and mechanical damage. Hard and brittle rubber, cracking, checking, tears, cuts, abrasions, and excessive swelling suggest deterioration of the rubber.
Page 410: Brake System
410 MAINTAINING YOUR VEHICLE attempt to clean the PCV valve! Check ventilating hose for indication of damage or plugging with deposits. Replace if necessary. Brake System Power Disc Brakes (Front and Rear) Disc brakes do not require adjustment; however, several hard stops during the break-in period are recommended to seat the linings and wear off any foreign material.
Page 411: Automatic Transmission
Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture. CAUTION! Do not allow a petroleum-base fluid to contaminate the brake fluid. Seal damage may result. Brake Hoses Inspection should be performed whenever the brake system is serviced or at intervals specified.
Page 412 412 MAINTAINING YOUR VEHICLE least 15 miles (24 km) of driving. At normal operating temperature the fluid cannot be held comfortably be- tween the fingertips. To check the automatic transmission fluid level properly, the following procedure must be used: 1. Operate the engine at idle speed and normal operating temperature.
Page 413 CAUTION! Be aware that if the fluid temperature is below 50°F (10°C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading. 7. Check for leaks. Release parking brake. To prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain that the dipstick cap is properly reseated.
Page 414: Transfer Case
414 MAINTAINING YOUR VEHICLE CAUTION! Using a transmission fluid other than the manufac- turers recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Using a transmission fluid other than the manufacturers recommended fluid will result in more frequent fluid and filter changes.
Page 415: Appearance Care And Protection From Corrosion
NOTE: The presence of water in the gear lubricant will result in corrosion and possible failure of differential components. Operation of the vehicle in water, as may be encountered in some off-highway types of service, will require draining and refilling the axle to avoid damage. Rear Axle Rear Axle fluid levels should be 7/8 in.
Page 416 416 MAINTAINING YOUR VEHICLE • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using a mild car wash soap, and rinse the panels completely with clear water.
Page 417 • If your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibil- ity of the owner. •...
Page 418 418 MAINTAINING YOUR VEHICLE • For grease stains, apply Mopar cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • Do not use any solvents or protectants on Yes Essen- tials products. Interior Care Use Mopar Fabric Cleaner to clean fabric upholstery and carpeting.
Page 419 To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses.
Page 420: Fuse Block
420 MAINTAINING YOUR VEHICLE Replace the belts if they appear frayed or worn or if the buckles do not work properly. FUSE BLOCK CAUTION! When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload.
Page 421: Fuses (Interior)
MAINTAINING YOUR VEHICLE 421 Fuses (Interior) The fuse block contains blade-type mini-fuses, relays, and circuit breakers for high-current circuits. It is located in the left kick panel. It is accessible through a snap-in cover.
Page 422 422 MAINTAINING YOUR VEHICLE Cavity Mini Fuse/Color 15 Amp Blue 10 Amp Red 10 Amp Red 10 Amp Red Description Cavity Instrument Clus- ter Battery Feed Spare Ignition Run/ Start for Next Generation Con- troller (NGC), Integrated Power Module (IPM), AC Relay and Fuel Pump Relay Door Node and...
Page 423 Cavity Mini Fuse/Color Description 10 Amp Red 10 Amp Red Heated Mirrors Cluster Battery 20 Amp Yellow Ignition Run HVAC Module/ 10 Amp Red Heated Rear Glass (EBL) Re- ABS Module Ig- 10 Amp Red nition Run Battery Feed Blue Tooth, Compass/Trip 15 Amp Blue (CMTC), Sentry...
Page 424: Fuses (Power Distribution Center)
424 MAINTAINING YOUR VEHICLE Fuses (Power Distribution Center) Power Distribution Center Your vehicle is equipped with an electrical power distri- bution center located in the left side of the engine compartment. This center contains cartridge fuses, mini fuses and relays. A description of each fuse and component may be stamped on the inside cover otherwise the cavity number of each fuse is stamped on the inside cover that corre- sponds to the following chart.
Page 425 Cartridge Mini Cavity Fuse / Fuse Relay 40 Amp Blower Motor Relay Green Feed 40 Amp JB Feed Acc Delay Green Spare 30 Amp Pink 40 Amp Power Liftgate ( If Green Equipped) 40 Amp JB Feed / Heated Green Rear Glass (EBL)/ T Case Brake 30 Amp...
Page 426 426 MAINTAINING YOUR VEHICLE Cartridge Mini Cavity Fuse / Fuse Relay 20 Amp Yellow 15 Amp Blue 15 Amp Blue Spare 20 Amp Yellow Spare Relay Relay Spare Description Cavity Trailer Tow A/C Clutch Stop Lamp Switch Run/Start Relay Feed Run Start Run Remote Cartridge...
Page 427: Fuses (Integrated Power Module)
Fuses (Integrated Power Module) Integrated Power Module An integrated Power Module is located in the left side of the engine compartment. This center contains cartridge fuses, mini fuses and relays. A description of each fuse and component may be stamped on the inside cover MAINTAINING YOUR VEHICLE 427 otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the following chart.
Page 428 428 MAINTAINING YOUR VEHICLE Cartridge Mini Cavity Fuse / Fuse Relay 10 Amp Relay 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow Description Cavity Rt Park Lamps Radiator Fan Hi Rly Front Control Mod- ule (FCM) Batt #4 Front Control Mod-...
Page 429: Vehicle Storage
Cartridge Mini Cavity Fuse / Fuse Relay Relay Adjustable Pedal 30 Amp Ignition Off Draw Green (IOD) #1 30 Amp Ignition Off Draw Green (IOD) #2 Spare Spare VEHICLE STORAGE If you are storing your vehicle for more than 21 days, we Description recommend that you take the following steps to mini- mize the drain on your vehicle’s battery:...
Page 430: Replacement Light Bulbs
430 MAINTAINING YOUR VEHICLE REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Dome Light ....Not Serviceable Liftgate Lamp ......567 Overhead Console Lights.
Page 431 2. Remove one nut that attaches the headlight to the inner fender panel. Access to the nut is possible by opening the fender panel access door which is located in the wheel liner. 3. Grasp the headlight and pull firmly to disengage the headlight from the fender panel.
Page 432: Rear Side Marker, Tail Lights, Turn Signals And Backup Lights - Replacement
432 MAINTAINING YOUR VEHICLE Rear Side Marker, Tail Lights, Turn Signals And Backup Lights — Replacement 1. Remove the two push-pins from the tail light housing.
Page 433 MAINTAINING YOUR VEHICLE 433 2. Rotate the light to the outboard side of the vehicle and 3. Unlock and remove electrical connector. remove.
Page 434 434 MAINTAINING YOUR VEHICLE 4. Remove the three screws holding the bulb strip to the 5. Remove the bulb strip from the tail light lens. back of the tail lamp.
Page 435 MAINTAINING YOUR VEHICLE 435 6. Remove bulbs from bulb strip by pulling the bulb straight out.
Page 436: License Lights
436 MAINTAINING YOUR VEHICLE License Lights 1. Remove the two screws securing the lens to the liftgate. 2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket.
Page 437: Center High-Mounted Stoplight
Center High-Mounted Stoplight 1. Remove two screws securing stoplight housing assem- bly to the liftgate. MAINTAINING YOUR VEHICLE 437 2. Turn socket 1/4 counterclockwise and free from hous- ing. 3. Pull bulb straight from socket to remove.
Page 438: Fog Lights
438 MAINTAINING YOUR VEHICLE Fog Lights To replace the left foglamp bulb: 1. Remove the three wheel liner screws. 2. Remove the remove the far left air dam screw at the bottom of the fascia. 3. Peel back the liner and access the foglamp. 4.
Page 439: Fluids And Capacities
FLUIDS AND CAPACITIES Fuel 3.7L/4.7L, 87 Octane Engine Oil (with filter) 3.7L, SAE 5W-20, API Certified 4.7L, SAE 5W-20, API Certified 5.7L, SAE 5W-20, API Certified Cooling System (includes 2.1 Qts./2L for coolant bottle 3.7L without Rear Heat (Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula) 3.7L with Rear Heat (Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula) 4.7L without Rear Heat (Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula) 4.7L with Rear Heat (Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula)
Page 440: Fluids, Lubricants And Genuine Parts
440 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Engine Coolant 3.7/4.7L/5.7L Engine Oil Engine Oil Filter Spark Plugs (5.7L Engine) Spark Plugs (4.7L Engine) Spark Plugs (3.7L Engine) Fuel Selection 3.7L/4.7L Fuel Selection 5.7L Fluids, Lubricants and Genuine Parts Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or- ganic Additive Technology) Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of...
Page 441: Chassis
Chassis Component Automatic Transmission Transfer Case Front Axle Rear Axle Brake Master Cylinder Power Steering Reservoir Fluids, Lubricants and Genuine Parts. Mopar ATF+4, Automatic Transmission Fluid. Mopar ATF+4, Automatic Transmission Fluid. SAE 75W-90 Multipurpose Type, GL-5 Gear Lubricant or equivalent. SAE 75W-140 Synthetic Gear Lubricant or equivalent.
Page 443 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..444 Maintenance Schedule ....444 Required Maintenance Intervals ... 446...
Page 444 444 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type on the following pages must be done at the times or mileages specified to assure the continued proper func- tioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
Page 445 if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. •...
Page 446 446 MAINTENANCE SCHEDULES Once a Month • Check tire pressure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as required. • Check the fluid levels of coolant reservoir, brake master cylinder, power steering and transmission and add as needed.
Page 447 Maintenance Items Change the engine oil and engine oil filter. Rotate Tires. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter, replace if necessary. Inspect the brake linings, replace if necessary. Inspect the front &...
Page 448 448 MAINTENANCE SCHEDULES Maintenance Items Replace the engine air cleaner filter. Inspect the transfer case fluid. Replace the top row of spark plugs on 4.7L engines. Replace the spark plugs on 3.7L and 5.7L engines. Drain and refill automatic transmission fluid and change main sump filter (4.7L/5.7L engines only).
Page 449 Maintenance Items Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, snow- plowing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert operation or more then 50% of your driving is at sustained high speeds during hot weather, above 90F°...
Page 450 450 MAINTENANCE SCHEDULES Maintenance Items Drain and refill automatic transmission fluid and change main sump filter and spin-on cooler return filter (if equipped)(4.7L/5.7L engines only). Replace Accessory Drive Belt(s). WARNING! You can be badly injured working on or around a motor vehicle.
Page 451: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle ......452 Prepare For The Appointment .
Page 452: Suggestions For Obtaining Service For Your Vehicle
We want you to be happy with our products and services. Warranty service must be done by an authorized Chrysler, Dodge, or Jeep dealer. We strongly recommend that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
Page 453 technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. •...
Page 454 454 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommuni- cation Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the United States can communicate with the manufacturer by dialing 1–800–380–CHRY.
Page 455: Warranty Information (U.s. Vehicles Only)
WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Page 456: Reporting Safety Defects
456 IF YOU NEED CONSUMER ASSISTANCE REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer.
Page 457: Publication Order Forms
PUBLICATION ORDER FORMS To order the following manuals, you may use either the website or the phone numbers listed below. Visa, Mas- tercard, American Express, and Discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is required when ordering manuals.
Page 458: Department Of Transportation Uniform Tire Quality Grades
458 IF YOU NEED CONSUMER ASSISTANCE Call Toll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1143 (Canada) Visit us on the World Wide Web at: • www.techauthority.daimlerchrysler.com • www.daimlerchrysler.ca/manuals DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway Traffic Safety Adminis- tration.
Page 459: Temperature Grades
on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor- mance. WARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
Page 461 INDEX...
Page 462 462 INDEX ABS (Anti-Lock Brake System) ... . 195,291 Adding Fuel ......336 Adjustable Pedals .
Page 463 Special Additives ..... . 413 Torque Converter ..... . 280 Axle Fluid .
Page 464 464 INDEX Oil (Engine) ......393 Power Steering ......399 Radiator (Coolant Pressure) .
Page 465 Adding Coolant (Antifreeze) ....405 Coolant Capacity ..... . 439 Coolant Level .
Page 466 466 INDEX Driving Through Flowing, Rising, or Shallow Standing Water ......288 DVD Player (Video Entertainment System) .
Page 467 Oil ......391,439,440 Oil Filler Cap ....384,385,386,393 Oil Selection .
Page 468 468 INDEX Engine Oil ......391 Power Steering ......399 Transfer Case .
Page 469 Gross Vehicle Weight Rating ....346 GVWR ......343,346 Hands-Free Phone (UConnect™) .
Page 470 470 INDEX Information Center, Vehicle ....159 Inside Rearview Mirror ....83 Instrument Cluster .
Page 471 Center Mounted Stop ....437 Courtesy/Reading ..... 158 Cruise .
Page 472 472 INDEX Lower Anchors and Tether for CHildren (LATCH) ......68 Lubrication, Body .
Page 473 Oil Change Indicator, Reset ....197 Oil, Engine ......391,440 Capacity .
Page 474 474 INDEX Power Brakes ......410 Distribution Center (Fuses) ..384,385,386,424 Door Locks .
Page 475 Recreational Towing ..... . 360 Shifting into Transfer Case Neutral (N) ..361 Shifting out of Transfer Case Neutral (N) ..363 Reformulated Gasoline .
Page 476 476 INDEX Pretensioners ......50 Reminder ......194 Seats .
Page 477 Spark Plugs ......395 Speed Control (Cruise Control) ....149 Speedometer .
Page 478 478 INDEX Tires ......77,313,458 Aging (Life of Tires) ....319 Air Pressure .
Page 479 Cooling System Tips ....359 Hitches ......351 Minimum Requirements .
Page 480 480 INDEX Vehicle Identification Number (VIN) ... . 7 Vehicle Information Center ....159 Vehicle Loading .
Page 481 INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalLocking Doors With The KeySENTRY KEY Replacement KeysCustomer Key ProgrammingGeneral InformationIGNITION AND STEERING LOCK Ignition Accessory Delay FeatureSECURITY ALARM SYSTEM - IF EQUIPPED To Set the AlarmTo Disarm the SystemILLUMINATED ENTRY Vehicles Equipped With Power Door LocksREMOTE KEYLESS ENTRY To unlock the doors and liftgateTo lock the doors and liftgateUsing the Panic AlarmGeneral InformationProgramming Additional Transmitters Battery ReplacementREMOTE STARTING SYSTEM - IF EQUIPPED DOOR LOCKS Manual Door LocksPower Door LocksChild Protection Door LockWINDOWS Power Windows Auto DownAuto Up Feature with Anti-Pinch Protection (Drivers and Front Passenger Door Only)Window Lockout SwitchLIFTGATE Power Liftgate - If EquippedOCCUPANT RESTRAINTS Lap/Shoulder BeltsAdjustable Upper Shoulder Belt AnchorageSecond Row Center Seat BeltAutomatic Locking Retractors (ALR) Mode - If EquippedRear 60/40 Seat Third Row...

This manual is also suitable for:

2008 hb durango

Dodge 2008 Durango Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Instrument Panel and Controls

Starting and Operating

Quick Links

INTRODUCTION

Chapters

Related Manuals for Dodge 2008 Durango

Summary of Contents for Dodge 2008 Durango