Dodge 2007 Sprinter Owner's Manual page 309

Changing bulbs
Press catches 1 down.
Swing housing cover 2 in the direc-
tion of the arrow and remove it.
5
3 Low-beam headlamps
4 Halogen high-beam headlamps/xenon
headlamp cornering lamp*
Pull the connector off the bulb holder.
Unclip the retainer spring and remove
the bulb.
Insert the new bulb such that the base
locates in the recess of the bulb holder.
Clip on the retainer spring and plug the
connector onto the bulb.
Insert housing cover 2 into lower
brackets.
Swing housing cover 2 toward head-
lamp casing.
Pull first the inner and then the outer
catch 1 upward until it audibly engag-
es in place.
Turn signals
1 Bulb holder
Turn bulb holder 1 and the bulb coun-
terclockwise and remove the holder.
Press down on the bulb, turn it counter-
clockwise and remove it from bulb
holder 1.
Press the new bulb into bulb holder 1
and screw it in clockwise.
Place bulb holder 1 into the lamp and
turn it clockwise.
Parking lamps/side marker
1 Cap
Turn cap 1 counterclockwise and re-
move it.
Remove the bulb holder together with
the bulb.
Pull the bulb out of the bulb holder.
Press the new bulb into the bulb holder.
Insert the bulb holder with bulb into the
reflector.
Replace cap 1 and turn it clockwise to
the stop.