Dodge 2007 Charger SRT8 Owner's Manual
  1. Manuals
  2. Brands
  3. Dodge Manuals
  4. Automobile
  5. 2007 Charger SRT8
  6. Owner's manual

Dodge 2007 Charger SRT8 Owner's Manual

Dodge 2007 charger srt8 automobile owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SECTION
1

INTRODUCTION

2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
4
UNDERSTANDING YOUR INSTRUMENT PANEL
5
STARTING AND OPERATING
6
WHAT TO DO IN EMERGENCIES
7
MAINTAINING YOUR VEHICLE
8
MAINTENANCE SCHEDULES
9
IF YOU NEED CONSUMER ASSISTANCE
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
INDEX
TABLE OF CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327
PAGE
1
2
3
4
5
6
7
8
9
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2007 Charger SRT8 and is the answer not in the manual?

Questions and answers

Related Manuals for Dodge 2007 Charger SRT8

Summary of Contents for Dodge 2007 Charger SRT8

  • Page 1: Introduction

    TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...

  • Page 3: Table Of Contents

    CONTENTS Introduction ......4 How To Use This Manual ....4 Warnings And Cautions .

  • Page 4: Introduction

    4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully.
  • Page 5 INTRODUCTION 5...

  • Page 6: Warnings And Cautions

    The vehicle identification number (VIN) is on the left front corner of the instrument panel. The VIN is visible from outside of the vehicle through the windshield. This number also appears on the Automobile Information VIN LOCATION Disclosure Label affixed to a window on your vehicle, the NOTE: It is illegal to remove the VIN.

  • Page 7: Vehicle Modifications / Alterations

    INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.

  • Page 9: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....11 Ignition Key Removal ....11 Key-In-Ignition Reminder .
  • Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks .....21 Child Protection Door Lock ....23 Windows .

  • Page 11: Things To Know Before Starting Your Vehicle 9

    A WORD ABOUT YOUR KEYS You can insert the double-sided keys into the locks with either side up. Vehicle Key The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer.

  • Page 12: Key-In-Ignition Reminder

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exit,” under “Personal Settings (Customer Program- mable Features),” under “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual. WARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.

  • Page 13: Replacement Keys

    NOTE: A key, which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition lock cylinder for that vehicle. During normal operation, after turning on the ignition switch, the Vehicle Security Alarm Indicator Light will turn on for three (3) seconds for a bulb check.

  • Page 14: Customer Key Programming

    14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When having the Sentry Key Immobilizer System serviced, bring all vehicle keys with you to the dealer. Customer Key Programming If you have two valid sentry keys, you can program new sentry keys to the system by performing the following procedure: 1.

  • Page 15: Security Alarm System - If Equipped

    • This device must accept any interference that may be received, including interference that may cause undes- ired operation. SECURITY ALARM SYSTEM — IF EQUIPPED The Vehicle Security Alarm system monitors the vehicle doors for unauthorized entry and the ignition switch for unauthorized operation.

  • Page 16: Illuminated Entry System

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The system remains armed during trunk entry. Press- ing the trunk button will not disarm the system. If someone enters the vehicle through the trunk and opens any door the alarm will sound. •...

  • Page 17: Remote Keyless Entry

    REMOTE KEYLESS ENTRY This system allows you to lock or unlock the doors, open the trunk, or activate the panic alarm from distances up to about 23 feet (7 meters) using a hand held radio transmitter. The transmitter need not be pointed at the vehicle to activate the system.

  • Page 18: To Lock The Doors

    18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE with Remote Key Lock,” under Personal Settings (Cus- tomer Programmable Features),” under “Electronic Ve- hicle Information Center (EVIC)” in Section 4 of this manual. Turn Headlights On with Remote Key Unlock This feature activates the headlights for up to 90 seconds when the doors are unlocked with the transmitter.

  • Page 19: Programming Additional Transmitters

    • You may need to be less than 23 feet (7 meters) from the vehicle when using the transmitter to turn off the panic alarm due to the radio frequency noises emitted by the system. Programming Additional Transmitters Refer to SENTRY KEY “Customer Key Programming.” (See page 14 for more information.) If you do not have a programmed transmitter, contact your dealer for details.

  • Page 20: General Information

    20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. •...

  • Page 21: Power Door Locks

    WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Unsupervised use of vehicle equipment may cause severe personal injuries and death.
  • Page 22 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Automatic Door Locks feature is enabled. 2. The transmission is in gear. 3.

  • Page 23: Child Protection Door Lock

    Child Protection Door Lock To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a child protection door lock system. To Engage the Child Protection Door Lock 1. Open the rear door. 2.

  • Page 24: Windows

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Disengage the Child Protection Door Lock 1. Open the rear door. 2. Insert the tip of the vehicle’s ignition key or alike into the child lock control and pull it downward. Child Lock Control 3.
  • Page 25 WARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window switches. Such entrapment may result in serious injury or death.
  • Page 26 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Off to Accessories Until Exit,” under “Personal Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Sec- tion 4 of this manual. NOTE: • If the window runs into any obstacle during auto- closure, it will reverse direction and then stop.

  • Page 27: Wind Buffeting

    Reset Any time the vehicle battery is disconnected, or goes dead, the auto-up function will be disabled. To reactivate the auto-up feature, perform the following steps after vehicle power is restored: 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed.

  • Page 28: Trunk Safety Warning

    28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The trunk lid can be released from outside the vehicle by pressing the trunk button on the Remote Keyless Entry Transmitter two times. With the ignition ON, the trunk open symbol will display in the instrument cluster indicating that the trunk is open.

  • Page 29: Occupant Restraints

    OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, front airbags for both the driver and front passenger and, if so equipped, side curtain airbags for the driver and passen- gers seated next to a window.
  • Page 30 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
  • Page 31 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Connecting Latch Plate To Buckle THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 WARNING! • A belt that is buckled into the wrong buckle will not protect you properly.
  • Page 32 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap belt portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
  • Page 33 WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, etc.).

  • Page 34: Lap/Shoulder Belt Untwisting Procedure

    34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180°...

  • Page 35: Automatic Locking Mode - If Equipped

    BeltAlert Programming The Enhanced Warning System (BeltAlert) can be en- abled or disabled by your authorized dealer or by performing the following steps: NOTE: DaimlerChrysler does not recommend deacti- vating the Enhanced Warning System (BeltAlert). 1. With all doors closed, and the ignition switch in any position except ON or START, buckle the driver’s seat belt.

  • Page 36: Seat Belts And Pregnant Women

    36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE distinctive label on the webbing. Children 12 years old and under should be properly restrained in the rear seat whenever possible. How To Engage The Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2.

  • Page 37: Driver And Front Passenger Supplemental Restraint System (Srs) - Airbag

    Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the center of the steering wheel.
  • Page 38 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag covers may not be obvious in the NOTE: interior trim; but they will open to allow airbag deploy- ment. WARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them.
  • Page 39 NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the curtain airbags. Along with the seat belts, front airbags work with the instrument panel knee bolsters to provide improved protection for the driver and front passenger.
  • Page 40 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. The driver and front passenger seats should be moved back as far as practical to allow the airbags time to inflate. 9. If your vehicle has side curtain airbags do not lean against the door, airbags will inflate forcefully into the space between you and the door.
  • Page 41 • Airbag Warning Light • Driver Airbag • Front Passenger Airbag • Supplemental Side Curtain Airbags above Side Win- dows (if equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Seatbelt Reminder Light • Knee Impact Bolsters •...
  • Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Ignoring the AIRBAG Warning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not come on, stays on after you start the vehicle, or if it comes on as you drive, have the airbag system checked right away.
  • Page 43 • The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position every- one for the best interaction with the front airbag. If A Deployment Occurs The airbag system is designed to deploy when the ACM detects a moderate-to-severe collision, to help restrain the driver and front passenger, and then to immediately deflate.
  • Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Deployed airbags can’t protect you in another colli- sion. Have the airbags replaced by an authorized dealer as soon as possible. Enhanced Accident Response Feature If the airbags deploy after an impact and the electrical system remains functional, vehicles equipped with power door locks will unlock automatically.

  • Page 45: Event Data Recorder (Edr)

    Airbag Warning Light You will want to have the airbags ready to inflate for your protection in an impact. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system promptly: •...

  • Page 46: Child Restraint

    46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE treated confidentially. Confidential data will not be dis- closed by DaimlerChrysler to any third party except when: 1. Used for research purposes, such as to match data with a particular crash record in an aggregate database, provided confidentiality of personal data is thereafter preserved 2.
  • Page 47 WARNING! In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
  • Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children and Child Restraints Children who weigh more than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing direction are for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year.
  • Page 49 WARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. •...
  • Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the child restraint using lower anchorages and upper tether straps from the child restraint to the vehicle structure. LATCH-compatible child restraint systems are now avail- able. However, because the lower anchorages are to be introduced over a period of years, child restraint systems having attachments for those anchorages will continue to have features for installation using the vehicle’s seat...
  • Page 51 The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back, and are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
  • Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraint installation, instead of tucking the seat belt behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child.
  • Page 53 buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. If the belt still can’t be tightened, or if by pulling and pushing on the restraint loosens the belt, you may need to do something more.

  • Page 54: Break-In Recommendations

    54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.

  • Page 55: Safety Tips

    CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the break-in and not interpreted as an indication of difficulty.

  • Page 56: Safety Checks You Should Make Inside The Vehicle

    56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.

  • Page 57: Periodic Safety Checks You Should Make Outside

    a collision if they have been damaged (bent retractor, torn webbing, etc. If there is any question regarding belt or retractor condition, replace the belt. Airbag Warning Light The light should come on and remain on for 6 to 8 seconds as a bulb check when the ignition switch is first turned ON.

  • Page 59: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......62 Inside Day/Night Mirror ....62 Automatic Dimming Inside Mirror —...
  • Page 60 60 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints ..... . .86 Heated Seats ......86 Folding Rear Seat .
  • Page 61 To Accelerate For Passing ....102 Overhead Console ..... 103 Courtesy/Reading Lights .

  • Page 62: Mirrors

    62 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window. A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjusting Rearview Mirror Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).

  • Page 63: Outside Mirrors

    CAUTION! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirror.

  • Page 64: Power Remote-Control Mirrors

    64 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Remote-Control Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror, right mirror, or off position. After selecting a mirror, move the knob in the same direction you want the mirror to move.

  • Page 65: Hands-Free Communication (Uconnect™) - If Equipped

    HANDS–FREE COMMUNICATION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., Call” “Mike” ”Work or Dial” “248-555-1212 ). Your cellular phone’s audio is trans- mitted through your vehicle’s audio system;...

  • Page 66: Operations

    66 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The UConnect™ system can be used with any Hands- Free Profile certified Bluetooth™ cellular phone. See www.chrysler.com/uconnect for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile), you may not be able to use any UCon- nect™...
  • Page 67 NOTE: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin.
  • Page 68 68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can enter any four-digit pin number. You will not need to remember this pin number after the initial pairing process. • For identification purposes, you will be prompted to give the UConnect™ system a name for your cellular phone.
  • Page 69 you can say John Doe, where John Doe is a previ- ously stored name entry in the UConnect™ phone- book. Refer to Add Names to Your UConnect™ Phonebook, to learn how to store a name in the phonebook. • The UConnect™ system will confirm the name and then dial the corresponding phone number, which may appear in the display of certain radios.
  • Page 70 70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the Ready prompt and the following beep, say Phonebook Edit. • You will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit.

  • Page 71: Phone Call Features

    Delete All Entries in the UConnect™ Phonebook • Press the ’Phone’ button to begin. • After the Ready prompt and the following beep, say Phonebook Erase All. • The UConnect™ system will ask you to verify that you wish to delete all the entries from the phonebook. •...
  • Page 72 72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone.

  • Page 73: Uconnect™ System Features

    established, press and hold the ’Phone’ button until you hear a double beep indicating that the two calls have been joined into one conference call. Call Termination To end a call in progress, momentarily press the Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call.
  • Page 74 74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect™ language change op- eration, only the language specific 32-name phonebook is usable.
  • Page 75 NOTE: The Towing Assistance number dialed is based on the Country where the vehicle is purchased (1-800- 528-2069 for USA, 1-877-213-4525 for Canada, 55-14-3454 for Mexico city and 1-800-712-3040 for outside Mexico city in Mexico). Please refer to the 24-Hour “Towing Assistance” cover- age details in the Warranty information booklet and on the 24–Hour Towing Assistance Card.
  • Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE a , you could press the ’Voice Recognition’ button and say Pair a Phone to select that option without having to listen to the rest of the voice prompt. Turning Confirmation Prompts On/Off Turning confirmation prompts off will stop the system from confirming your choices (e.g., the UConnect™...

  • Page 77: Advanced Phone Connectivity

    • After the Ready prompt and the following beep, say Mute. In order to un-mute the UConnect™ system: • Press the ’Voice Recognition’ button. • After the Ready prompt and the following beep, say Mute-off. Information Service When using AT&T Wireless Service, dialing to phone number #121, you can access voice activated automated system to receive news, weather, stocks, traffic, etc.

  • Page 78: Things You Should Know About Your Uconnect™ System

    78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE button and say “Select” or “Delete.” Also, see the next two sections for an alternate way to “select” or “de- lete” a paired phone. Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™...
  • Page 79 • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • Even though the system is designed for users speaking in North American English, French, and Spanish ac- cents, the system may not always work for some.
  • Page 80 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnect™ system. • Echo at far end can sometime be reduced by lowering the in-vehicle audio volume.
  • Page 81 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81...
  • Page 82 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83...

  • Page 84: Seats

    84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE North American English Primary Alternate(s) Zero Add location Add new All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing...

  • Page 85: Power Reclining Seats

    WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. CAUTION! Do not place any article under a power seat as it may cause damage to the seat controls.

  • Page 86: Lumbar Support

    86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support This feature allows you to increase or decrease the amount of lumbar support. Turn the control lever for- ward to increase and rearward to decrease the desired amount of lumbar support. Lumbar Support Control Lever Head Restraints Head restraints can reduce the risk of whiplash injury in...
  • Page 87 ignition, you can choose from High, Off, or Low heat settings. Amber LEDs in the top portion of each switch indicate the level of heat in use. Two LEDs will illuminate for high, one for low, and none for off. Front Heated Seat Switch Press the switch once to select high-level heating.

  • Page 88: Folding Rear Seat

    88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat Folding Rear Seats The rear seatbacks can be folded forward to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use.

  • Page 89: To Open And Close The Hood

    TO OPEN AND CLOSE THE HOOD Two latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Hood Release Lever Next, move to the outside of the vehicle and push the safety catch to the left.

  • Page 90: Lights

    90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. You could have a collision. Be sure all hood latches are fully latched before driving. LIGHTS Headlight Switch The headlight switch is located on the left side of...

  • Page 91: Headlights On With Wipers (Available With Auto Headlights Only)

    headlights will stay ON for up to 90 seconds after you turn the ignition switch OFF. To turn the Automatic System OFF, move the headlight switch out of the AUTO (A) position. Headlight Switch NOTE: The engine must be running before the head- lights will come ON in the Automatic mode.

  • Page 92: Daytime Running Lights (Canada Only)

    92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If you turn the headlights, park lights, or ignition switch on again, the system will cancel the delay. If you turn the headlights off before the ignition, they will turn off in the normal manner. NOTE: The lights must be turned off within 45 seconds of turning the ignition off to activate this feature The Headlight delay time is programmable.

  • Page 93: Multi-Function Lever

    Multi-Function Lever The multi-function lever controls the operation of the turn signals, headlight beam selection, and passing lights. The lever is located on the left side of the steering column. Multi-Function Lever Turn Signals Move the Multi-Function Lever up or down and the corresponding turn signal indicator in the instrument cluster flashes to show proper operation of the front and rear turn signal lights.

  • Page 94: Overhead Console Map/Reading Lights

    94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overhead Console Map/Reading Lights These lights are mounted between the sun visors on the overhead console. Each light is turned ON by pressing the lens. Press the lens a second time to turn OFF the light.

  • Page 95: Windshield Wipers And Washers

    Dome Light Position Rotate the dimmer control completely upward to the second detent to turn on the interior lights. The interior lights will remain on when the dimmer control is in this position. Interior light Defeat (OFF) Rotate the dimmer control to the extreme bottom “OFF” position.

  • Page 96: Intermittent Wiper System

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper switch is left in any position other than OFF. Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause be- tween cycles desirable.

  • Page 97: Headlights On With Wipers (Available With Auto Headlights Only)

    two wipe cycles after releasing the lever and then resume the intermittent interval previously selected. If you activate the washer while the windshield wiper is turned OFF, the wipers will operate for two wipe cycles and then turn OFF. Headlights On with Wipers (Available with Auto Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on...

  • Page 98: Tilt/Telescoping Steering Column

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The fluid reservoir will hold nearly 1 gallon (4 liters) of washer fluid when the message “Low Washer Fluid” appears in the Electronic Vehicle Information Center (EVIC). WARNING! Commercially available windshield washer solvents are flammable.

  • Page 99: Adjustable Pedals - If Equipped

    outward or push it inward as desired. To lock the steering column in position, push the control handle inward until fully engaged. WARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driv- ing. Adjusting the steering wheel while driving or driving without the telescoping adjustment locked could cause the driver to lose control of the vehicle.

  • Page 100: Electronic Speed Control

    100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch rearward to move the pedals rearward (toward the driver). • The pedals can be adjusted with the ignition OFF. • The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON.

  • Page 101: To Activate

    To Activate: Push the speed control lever inward (toward the steering column) and release (“ON/OFF”). The indicator light in the lever (and in the instrument cluster on some models) will illu- minate to show that the speed control system is ON. To turn the system OFF, push the lever inward (toward the steering column) again and release.

  • Page 102: To Vary The Speed Setting

    102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE speed. To do so, push the lever up and release (RES/ ACCEL), and then remove your foot from the accelerator pedal. To Vary the Speed Setting: When the speed control is set, you can increase speed by pushing the lever up and holding (“RES/ACCEL”).

  • Page 103: Overhead Console

    WARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Control in heavy traffic or on roads that are winding, icy, snow-covered, or slippery.

  • Page 104: Sunglasses Storage

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sunglasses Storage At the rear of the console, a compartment is provided for the storage of a pair of sunglasses. The storage compartment access is a push/push design. Push the finger depression on the overhead console to open.

  • Page 105: Programming Homelink

    Programming HomeLink NOTE: When programming a garage door opener, it is advised to park outside the garage. It is also recom- mended that you install a new battery in the hand-held transmitter of the device being programmed. This will allow for quicker training and accurate transmission of the radio-frequency signal.
  • Page 106 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HomeLink Buttons 2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold the HomeLink button (that you want to train) and the hand-held transmitter button.

  • Page 107: Canadian Programming/Gate Programming

    system). Please proceed to Steps 6–8 to complete the programming of a rolling code equipped device (most common garage door openers require this step. 6. At the garage door opener receiver (motor-head unit) in the garage, locate the learn or smart button. This can usually be found where the hanging antenna wire is attached to the motor-head unit.

  • Page 108: Using Homelink

    108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE successfully by HomeLink. The EVIC will display “Chan- nel X Trained” (where X is Channel 1, 2, or 3). Proceed with Programming Step 4 to complete the procedure. Using HomeLink To operate, simply press and release the programmed HomeLink button.

  • Page 109: Power Sunroof - If Equipped

    This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received including interference that may cause undes- ired operation.

  • Page 110: Opening Sunroof - Express

    110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.

  • Page 111: Pinch Protect Override

    Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forward and hold for two seconds after the reversal occurs. This allows the sunroof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.

  • Page 112: Sunroof Fully Closed

    112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Settings (Customer Programmable Features),” under “Electronic Vehicle Information Center (EVIC)” in Sec- tion 4 of this manual. Sunroof Fully Closed Press the switch forward and release to ensure that the sunroof is fully closed. ELECTRICAL POWER OUTLETS There are two 12-volt electrical outlets on this vehicle.

  • Page 113: Electrical Outlet Use With Engine Off

    The center console outlet is powered directly from the battery (power available at all times). Items plugged into this outlet may discharge the battery and/or prevent engine starting. Center Console Power Outlet UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Electrical Outlet Use With Engine Off CAUTION! •...

  • Page 114: Cup Holders

    114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS Front Seat Cup Holders — Standard The cup holders are located in the forward edge of the center console. Front Seat Cup Holders Front Seat Cup Holders — Premium The cup holders are located in the forward edge of the center console.

  • Page 115: Rear Seat Cup Holders

    Rear Seat Cup Holders The rear seat cup holders are located in the center armrest between the rear seats. The cup holders are positioned forward in the armrest and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the rear occupants’...

  • Page 116: Cargo Area

    116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Area The 60/40 split-folding rear seat provides cargo-carrying versatility. The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous, nearly flat extension of the load floor.

  • Page 117: Load Leveling System

    WARNING! • The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. To avoid loss of control result- ing in personal injury, follow these guidelines for loading your vehicle: • Always place cargo evenly on the cargo floor. Put heavier objects as low and as far forward as possible.

  • Page 119: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel And Controls ... . 122 Premium Instrument Cluster ....123 Instrument Cluster Descriptions .
  • Page 120 120 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - CD Mode ..148 Operation Instructions - Auxiliary Mode ..149 Operating Instructions - Hands Free Phone — If Equipped ......150 Operating Instructions - Satellite Radio —...
  • Page 121 Video Entertainment System (Sales Code XRV) — If Equipped ......166 Kicker Mobile Surround (Kms1) ... 167 Satellite Radio —...

  • Page 122: Instrument Panel And Controls

    122 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL AND CONTROLS 1 — Air Outlet 2 — Instrument Cluster 3 — Hazard Switch 4 — Electronic Stability Program Off Button* / Traction Control System Off Button* 5 — Glove Box 6 — Radio 7 —...

  • Page 123: Premium Instrument Cluster

    UNDERSTANDING YOUR INSTRUMENT PANEL 123 PREMIUM INSTRUMENT CLUSTER...

  • Page 124: Instrument Cluster Descriptions

    124 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 2. Trip Odometer Button Press this button to change the display from odometer to either of two trip odometer settings.
  • Page 125 engine running, your vehicle will usually be drivable. However, see your dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required. In this case, you may experience reduced performance, an elevated/rough idle or engine stall, and your vehicle may require towing.
  • Page 126 126 UNDERSTANDING YOUR INSTRUMENT PANEL 9. Turn Signal Indicators The arrow will flash with the exterior turn signal when the turn signal lever is operated. NOTE: A continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal NOTE: Check for a defective outside light bulb if either indicator flashes at a rapid rate.
  • Page 127 cycles, and the vehicle has been driven several miles at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. (See page 213 for more information.) 14. Oil Pressure Warning Light This light shows low engine oil pressure.
  • Page 128 128 UNDERSTANDING YOUR INSTRUMENT PANEL Loose Fuel Filler Cap If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic Vehicle Information Center (EVIC). Tighten the fuel filler cap properly and press the odometer reset button to turn off the message.
  • Page 129 turn on in the event of an EBD failure. Immediate repair of the ABS system is required in the event of an EBD failure. The operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the ON position.
  • Page 130 130 UNDERSTANDING YOUR INSTRUMENT PANEL Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
  • Page 131 functioning and service is required. However, the con- ventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes.

  • Page 132: Electronic Vehicle Information Center (Evic)

    132 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) Electronic Vehicle Information Center The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display. It is located in the instrument cluster below the speedometer. Vehicles equipped with steering wheel mounted buttons (de- scribed in this section) are also equipped with the EVIC.

  • Page 133: Electronic Vehicle Information Center (Evic) Displays

    Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being FUNC- played (if so equipped), or changes the current TION CD track being played (if so equipped) when SELECT Button the EVIC is in the Compass/Temp/Audio...

  • Page 134: Trip Functions

    134 UNDERSTANDING YOUR INSTRUMENT PANEL • Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph [1.6 km]) • Left/Right Rear Door Ajar (one or more, with a single chime if speed is above 1 mph [1.6 km]) •...
  • Page 135 • Elapsed Time • Display Units of Measure in Press the SCROLL button to cycle through all the Trip Computer functions. The Trip Functions mode displays the following: • Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET”...

  • Page 136: Compass Display

    136 UNDERSTANDING YOUR INSTRUMENT PANEL • Display Units of Measure in: To make your selection, press and release the FUNC- TION SELECT button until “US” or “METRIC” appears. To Reset The Display Reset will only occur while a resettable function is being displayed.
  • Page 137 UNDERSTANDING YOUR INSTRUMENT PANEL 137 Compass Variance Compass Variance is the difference between magnetic North and Geographic North. In some areas of the country, the difference between magnetic and geographic North is great enough to cause the compass to give false readings.

  • Page 138: Telephone - If Equipped

    138 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4.

  • Page 139: Navigation - If Equipped

    The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. Analog The EVIC displays this symbol to indicate that the UConnect™ phone is currently roaming. Roam- The EVIC displays this symbol to indicate that you have voice mail.

  • Page 140: System Warnings (Customer Information Features)

    140 UNDERSTANDING YOUR INSTRUMENT PANEL or Menu display on the Navigation Unit. When the Menu display is active, the SCROLL button can be used to scroll through the list, the FUNCTION SELECT button can be used to select an item, and the AUDIO MODE button can be used to return to the previous menu.
  • Page 141 Use the SCROLL button to display one of the following choices: “Language” When in this display you may select one of five lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT button while in this display to select English, Espanol, Deutsch, Italiano, or Francais.
  • Page 142 142 UNDERSTANDING YOUR INSTRUMENT PANEL on lock/unlock feature. To make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. “Flash Lights with Remote Key Lock” When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the remote keyless entry transmitter.

  • Page 143: Radio General Information

    door will cancel this feature. To make your selection, press and release the FUNCTION SELECT button until “Off,” “45 sec.,” “5 min.,” “10 min.,” “30 min.,” or “60 min.” appears. “Confirmation of Voice Commands” — If Equipped When ON is selected, all voice commands from the UConnect™...

  • Page 144: Am Reception

    144 UNDERSTANDING YOUR INSTRUMENT PANEL and thus remain a part of the AM reception. They interfere very little with the frequency variations that carry the FM signal. AM Reception AM sound is based on wave amplitude, so AM reception can be disrupted by such things as lightning, power lines and neon signs.

  • Page 145: Operating Instructions - Radio Mode

    Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
  • Page 146 146 UNDERSTANDING YOUR INSTRUMENT PANEL (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. To stop the search, press SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button causes the tuner to scan through preset stations in either, AM, FM, or Satellite (if equipped) frequencies, pausing for 5 seconds at each preset station before continuing to the next.
  • Page 147 Press the rotary TUNE control a third time and TREB will display. Turn the TUNE control to the right or left to increase or decrease the Treble tones. Press the rotary TUNE control a fourth time and BAL will display. Turn the TUNE control to the right or left to adjust the sound level from the right or left side speakers.

  • Page 148: Operation Instructions - Cd Mode

    148 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up.

  • Page 149: Operation Instructions - Auxiliary Mode

    TIME Button (CD Mode) Press this button to change the display from elapsed CD playing time to time of day. The time of day will display for 5 seconds. RW/FF (CD Mode) Press and hold the FF (Fast Forward) and the CD player will begin to fast forward until FF is released.

  • Page 150: Operating Instructions - Hands Free Phone - If Equipped

    150 UNDERSTANDING YOUR INSTRUMENT PANEL second time and the sound from the speakers will return. Rotating the volume control or turning OFF the ignition will also return the sound from the speakers. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function.

  • Page 151: Sales Code Rak - Am/Fm/Cassette/Cd (6-Disc) Radio With Optional Satellite Radio, Hands Free Phone, Video, Mp3, And Wma Capabilities

    SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SATELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAPABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. RAK Radio Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
  • Page 152 152 UNDERSTANDING YOUR INSTRUMENT PANEL new station until you make another selection. Holding the button and will bypass stations without stopping until you release it. SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to search for the next station, in either AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds (satellite scan 8 seconds) at each listenable station before continu- ing to the next.
  • Page 153 Setting the Tone, Balance, and Fade Press the rotary TUNE control and BASS will display. Turn the TUNE control to the right or left to increase or decrease the Bass tones. Press the rotary TUNE control a second time and MID will display.

  • Page 154: Operating Instructions - Tape Player

    154 UNDERSTANDING YOUR INSTRUMENT PANEL Country Oldies Soft Nostalgia Jazz Classical Rhythm and Blues Rhythm_and_Blues Soft Rhythm and Blues Foreign Language Foreign_Language Religious Music Religious Talk Personality Public College Unassigned Weather By pressing the SEEK button when the PTY icon is displayed, the radio will be tuned to the next frequency station with the same selected PTY name.

  • Page 155: Seek Button

    Seek Button Press the SEEK button up for the next selection on the tape and down to return to the beginning of the current selection. Press the SEEK button up or down to move the track number to skip forward or backward 1 to 6 selections. Press the SEEK button once to move 1 selection, twice to move 2 selections, etc.

  • Page 156: Noise Reduction

    156 UNDERSTANDING YOUR INSTRUMENT PANEL Noise Reduction The Dolby Noise Reduction System* is on whenever the tape player is on, but may be switched off. To turn off the Dolby Noise reduction System: Press Preset 1 after you insert the tape. The NR light in the display will go off when the Dolby System is off.

  • Page 157: Load/Eject Button (Cd Mode For Cd Audio Play)

    SCAN Button (CD MODE for CD Audio Play) Press the Scan button to scan through each track on the CD currently playing. LOAD/EJECT Button (CD Mode for CD Audio Play) LOAD/EJECT - Load Press the LOAD/EJT button and the push- button with the corresponding number where the CD is being loaded.

  • Page 158: Notes On Playing Mp3 Files

    158 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forward) and the CD player will begin to fast forward until FF is released or RW or another CD button is pressed. The RW (Reverse) button works in a similar manner.
  • Page 159 files properly and may be unable to play the file nor- mally. UDF and Apple HFS formats are not supported. The radio uses the following limits for file systems: • Maximum number of directory levels: 15 • Maximum number of files: 255 •...

  • Page 160: Operation Instructions

    160 UNDERSTANDING YOUR INSTRUMENT PANEL ID3 Tag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios. Playlist files are not supported. MP3 Pro files are not supported.
  • Page 161 LOAD/EJT - Eject Press the LOAD/EJT button and the push- button with the corresponding number where the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show EJECTING DISC when the disc is being ejected and prompt the user to remove the disc.

  • Page 162: Sales Code Rec - Am/Fm/Cd (6-Disc) Radio With Navigation System

    162 UNDERSTANDING YOUR INSTRUMENT PANEL Turn the TUNE control to display available folders or move through available folders. Press the TUNE control to select a folder. Buttons 1 - 6 (CD Mode for MP3 Play) Selects disc positions 1 - 6 for Play/Load/Eject. Operating Instructions - Hands Free Phone (If Equipped) Refer to “Hands-Free Phone”...

  • Page 163: Operating Instructions - Satellite Radio (If Equipped)

    Mapping information for navigation is supplied on a DVD that is loaded into the unit. One map DVD covers all of North America. Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Satellite Radio (If Equipped) Refer to your “Navigation User’s Manual”...
  • Page 164 164 UNDERSTANDING YOUR INSTRUMENT PANEL 5. Select DONE to exit from the clock setting mode. Press ENTER to save your changes. If you press CANCEL or NAV then your changes will not be saved. User Defined Clock If you wish to set the clock to a time different than the system clock, you can manually adjust the time by choosing the “User Defined Clock”...

  • Page 165: Audio Clock Display

    UNDERSTANDING YOUR INSTRUMENT PANEL 165 Audio Clock Display Select this option to change the size of the clock on the audio screens. 1. When you are at an audio screen, quickly press the TIME button on the navigation faceplate. 2. In this example the large clock appears on the screen. 4.

  • Page 166: Video Entertainment System (Sales Code Xrv) - If Equipped

    166 UNDERSTANDING YOUR INSTRUMENT PANEL VIDEO ENTERTAINMENT SYSTEM (SALES CODE XRV) — IF EQUIPPED The optional VES™ (Video Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-powered remote control, and two head- sets. The system is located in the center console storage bin under the armrest lid.

  • Page 167: Kicker Mobile Surround (Kms1)

    Remote Control Location Kicker Mobile Surround (KMS1) The VES for this vehicle comes equipped with Kicker Mobile Surround (KMS1). This feature offers the ultimate movie experience by providing surround sound uniquely equalized for the interior space of your vehicle. The KMS1 activates whenever a DVD is in the VES player, and the radio mode is set to VES, and the video screen is powered up.

  • Page 168: Electronic Serial Number/Sirius Identification Number (Esn/Sid)

    168 UNDERSTANDING YOUR INSTRUMENT PANEL at www.sirius.com. Please have the following informa- tion available when activating your system: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Credit card information. 3. Your Vehicle Identification Number. Electronic Serial Number/Sirius Identification Number (ESN/SID) The Electronic Serial Number/Sirius Identification Num- ber is needed to activate your Sirius Satellite Radio system.

  • Page 169: Selecting Satellite Mode In Ref, Raq, And Rak Radios

    Selecting Satellite Mode in REF, RAQ, and RAK Radios Selecting Satellite Mode — REF Radio Press the MODE button repeatedly until the word SAT appears in the display. A CD may remain in the radio while in the Satellite radio mode.

  • Page 170: Using The Pty (Program Type) Button (If Equipped)

    170 UNDERSTANDING YOUR INSTRUMENT PANEL Using the PTY (Program Type) Button (if equipped) Follow the PTY button instructions that apply to your radio. PTY Button SCAN When the desired program type is obtained, press the SCAN button within five seconds. The radio will play 7 seconds of the selected channel before moving to the next channel of the selected program type.

  • Page 171: Remote Sound System Controls

    REMOTE SOUND SYSTEM CONTROLS The remote sound system controls are located on the surface of the steering wheel at the 3 and 9 o’clock positions. Electronic Vehicle Information Center Vehicles equipped with steering wheel mounted buttons are also equipped with the Electronic Vehicle Information Center (EVIC).

  • Page 172: Radio Operation

    172 UNDERSTANDING YOUR INSTRUMENT PANEL When the EVIC is in the Compass/Temp/ Audio screen, press the FUNCTION SELECT button to advance the radio to the next preset station, to change the side of the tape being FUNC- played (if so equipped), or to change the cur- TION rent CD track being played (if so equipped).

  • Page 173: Satellite Radio Operation

    Press either the top or bottom of the SCROLL button twice to listen to the second track on the CD, three times to listen to the third track, and so forth. Satellite Radio Operation Press the top of the SCROLL button once to SEEK the next listenable station up from the current setting.

  • Page 174: Cd/Dvd Disc Maintenance

    174 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD DISC MAINTENANCE To keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.

  • Page 175: Manual Air Conditioning And Heating System

    Manual Air Conditioning and Heating System Manual Temperature Controls Blower Control The rotary knob on the left controls the blower. The control has an OFF posi- tion and four speed settings. The blower will remain on until the con- trol is turned to the OFF position or the ignition is turned OFF.
  • Page 176 176 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: To improve fuel economy, leave in defrost only when necessary. • Defrost/Floor Air flows through the front and rear floor outlets and the outlets at the base of the windshield. Air is also directed to the front door windows through the side window demister grilles.

  • Page 177: Automatic Temperature Control - If Equipped

    a second time to turn off the air conditioning. An LED in the button will illuminate when compressor operation is selected. Automatic Temperature Control — If Equipped Automatic Temperature Controls Automatic Operation The Infrared Dual-Zone Climate Control System auto- matically maintains the climate in the cabin of the vehicle at the comfort levels desired by the driver and passenger.
  • Page 178 178 UNDERSTANDING YOUR INSTRUMENT PANEL or passenger Temperature Control knob. Once the com- fort level is selected, the system will maintain that level automatically using the heating system. Should the de- sired comfort level require air conditioning, the system will automatically make the adjustment. You will experience the greatest efficiency by simply allowing the system to function automatically.
  • Page 179 Recirculation to be selected while in defrost or defrost/floor mode. Attempting to use the recircula- tion while in these modes will cause the LED in the control button to blink and then turn off. Manual Operation This system offers a full complement of manual override features, which consist of Blower Preferred Automatic, Mode Preferred Automatic, or Blower and Mode Pre- ferred Automatic.
  • Page 180 180 UNDERSTANDING YOUR INSTRUMENT PANEL...
  • Page 181 The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control knob (on the right) to one of the following positions. • Defrost Air is directed to the windshield through the outlets at the base of the windshield. Air is also directed to the front door windows through the side window demister grilles.

  • Page 182: Operating Tips

    182 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: To control the air conditioning manually, the mode selector must be moved out of the AUTO position. • Recirculation Control This button can be used to block out smoke, odors, dust, high humidity, or if rapid cooling is desired.
  • Page 183 system lubrication to minimize the possibility of com- pressor damage when the system is started again. Window Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating.
  • Page 184 184 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions...

  • Page 185: Rear Window Features

    REAR WINDOW FEATURES Electric Rear Window Defroster The electric Rear Window Defroster Control is located on the climate control. Press this button to turn on the rear window defroster and the heated side mirrors (if equipped). An LED in the button will illumi- nate when the rear window defroster is ON.

  • Page 187: Starting And Operating

    STARTING AND OPERATING CONTENTS Starting Procedures ....190 Automatic Transmission ....190 Normal Starting .
  • Page 188 188 STARTING AND OPERATING Electronic Brake Control System ... 208 ABS (Anti-Lock Brake System) ... . 208 TCS (Traction Control System) ... . 208 BAS (Brake Assist System) .
  • Page 189 6.1L Engine ......237 Reformulated Gasoline ....238 Gasoline/Oxygenate Blends .

  • Page 190: Starting And Operating

    190 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. WARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.

  • Page 191: If Engine Fails To Start

    If Engine Fails To Start If the engine fails to start after you have followed the “NORMAL STARTING” procedure, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded.

  • Page 192: After Starting

    192 STARTING AND OPERATING seconds with the accelerator pedal pushed all the way to the floor. Release the accelerator pedal and the key once the engine is running smoothly. Do not overspeed the engine. If the engine shows no sign of starting after two 15- second periods of cranking with the accelerator pedal held to the floor, the “NORMAL STARTING”...

  • Page 193: Automatic Transmission

    AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
  • Page 194 194 STARTING AND OPERATING The gear shifting process is continuously adapted, de- pendent on the driving style, the driving situation and the road characteristics. NOTE: • After selecting any driving position, wait a moment to allow the gear to engage fully before accelerating, especially when the engine is cold.

  • Page 195: Brake/Transmission Shift Interlock System

    Over Temperature Mode The transmission electronics constantly monitor the transmission oil temperature. If the transmission exceeds normal operating temperature, the transmission will change the way it shifts to help control the condition. This may result in a slightly different feeling or response during normal operation in D (Drive) position.

  • Page 196: Speed Automatic Transmission

    196 STARTING AND OPERATING out of the park position without pressing the brake. After operation, return the rubber storage tray to its original position. 5 Speed Automatic Transmission Shifting from D (Drive) to P (Park) or R (Reverse) (or from P or R to D) should be done only after the accelerator pedal is released and the vehicle is stopped.
  • Page 197 WARNING! Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage. The following indicators should be used to ensure that you have engaged the selector lever into the P (Park) position: •...
  • Page 198 198 STARTING AND OPERATING CAUTION! Coasting the vehicle, or driving for any other reason with selector lever in NEUTRAL can result in trans- mission damage. WARNING! Do not coast in N (Neutral) and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions.
  • Page 199 Briefly, press the selector lever in the “D +” direction and the transmission will shift from the current gear to the next higher gear. Press and hold the selector lever in the “D +” direction and the transmission will shift from the current gear directly to gear “D.”...

  • Page 200: Autostick

    200 STARTING AND OPERATING 6. Move the selector lever to the desired range. If the problem is no longer detected, the transmission will return to normal operation. Even if the transmission can be reset, we NOTE: recommend that you visit a dealer at your earliest possible convenience.

  • Page 201: Autostick General Information

    • An UPSHIFT message will appear in the Electronic Vehicle Information Center (EVIC) portion of the in- strument cluster when using Autostick . This message appears in order to alert the driver to upshift to the next gear. The UPSHIFT message will display while operating the vehicle at higher engine revolutions-per- minute (RPM).

  • Page 202: Driving On Slippery Surfaces

    202 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the rear wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a difference in the surface traction under the rear (driving) wheels.

  • Page 203: Parking Brake

    PARKING BRAKE The parking brake should always be applied when the driver is not in the vehicle. WARNING! Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always apply parking brake fully when parked to guard against vehicle movement and possible injury or damage.

  • Page 204: Brake System

    204 STARTING AND OPERATING NOTE: This light only shows that the parking brake is applied. It does not show the degree of brake application. WARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.
  • Page 205 The electronic brake force distribution (EBD) prevents the rear wheels from over-braking and provides greater control of available braking forces applied to the rear axle. When the vehicle is driven over 7 mph (11 km/h), you may also hear a slight clicking sound as well as some related motor noises.
  • Page 206 206 STARTING AND OPERATING WARNING! • The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to inter- ference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capability. In- stallation of such equipment should be performed by qualified professionals.

  • Page 207: Power Steering

    Brake Force Distribution (EBD) systems are not function- ing. Immediate repair to the ABS system is required. POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost.

  • Page 208: Electronic Brake Control System

    208 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM Your vehicle is equipped with an advanced electronic brake control system commonly referred to as ESP. This system includes the ABS (Anti-Lock Brake System), the TCS (Traction Control System), the BAS (Brake Assist System), and the ESP (Electronic Stability Program).

  • Page 209: Bas (Brake Assist System)

    BAS (Brake Assist System) This system complements the Anti-Lock Brake System (ABS) by optimizing the vehicle braking capability dur- ing emergency braking maneuvers. This system detects an emergency braking situation by sensing the rate and amount of brake application and then applies optimum pressure to the brakes.
  • Page 210 210 STARTING AND OPERATING The ESP uses sensors in the vehicle to determine the path that the driver intends to steer the vehicle and compares it to the actual path of the vehicle. When the actual path does not match the intended path, the ESP applies the brake of the appropriate wheel to assist in counteracting the condition of oversteer or understeer.
  • Page 211 Partial Off The “Partial Off” mode is intended for times when a more spirited driving experience is desired. It is also intended for driving in deep snow, sand, or gravel. This mode disables the TCS portion of the ESP and raises the threshold for ESP activation, which allows for more wheel spin than what ESP normally allows.

  • Page 212: Synchronizing Esp

    212 STARTING AND OPERATING WARNING! In the ESP Full Off mode, the engine torque reduc- tion and stability features are cancelled. Therefore, the enhanced vehicle stability offered by ESP is unavailable. NOTE: When the ESP is switched off a feature of the system remains active.

  • Page 213: Esp/Bas Malfunction Indicator Light And Esp/Tcs Indicator Light

    ESP/BAS Malfunction Indicator Light and ESP/TCS Indicator Light The malfunction indicator light for the ESP is combined with the BAS indicator. The yellow “ESP/BAS Malfunction Indicator Light” and the yellow “ESP/TCS Indicator Light” in the instrument cluster both come on when the ignition switch is turned to the “ON”...
  • Page 214 214 STARTING AND OPERATING NOTE: • P (Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards.
  • Page 215 65 = Aspect Ratio in Percent (%) —Ratio of section height to section width of tire. 10.5 = Section Width in Inches (in) R = Construction Code — R means Radial Construction. — D means Diagonal or Bias Construction. 15 = Rim Diameter in Inches (in) Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry.

  • Page 216: Tire Identification Number (Tin)

    216 STARTING AND OPERATING C,D,E = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load — Maximum Load indicates the maximum load this tire is designed to carry. Maximum Pressure — Maximum Pressure indicates the maximum permissible cold tire inflation pressure for this tire.

  • Page 217: Tire Loading And Tire Pressure

    01 = Number representing the year in which the tire was manufactured. (2 digits) —01 means the year 2001. —Prior to July 2000, tire manufacturers were only required to have 1 number to represent the year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or 1991. Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed...
  • Page 218 218 STARTING AND OPERATING Tire and Loading Information Placard Tire and Loading Information This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the total weight your vehicle can carry 3) the tire size designed for your vehicle 4) the cold tire inflation pressures for the front, rear and spare tires.
  • Page 219 Steps for Determining Correct Load Limit 1. Locate the statement “The combined weight of occu- pants and cargo should never exceed XXX pounds” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3.
  • Page 220 220 STARTING AND OPERATING...

  • Page 221: Tires - General Information

    WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.

  • Page 222: Tire Inflation Pressures

    222 STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation, also increases tire rolling resistance and results in higher fuel consump- tion.
  • Page 223 CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.”...

  • Page 224: Radial-Ply Tires

    224 STARTING AND OPERATING WARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).

  • Page 225: Tread Wear Indicators

    Tread Wear Indicators Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 inch (2 mm).

  • Page 226: Replacement Tires

    226 STARTING AND OPERATING Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure. The manu- facturer strongly recommends that you use tires equiva- lent to the originals in size, quality and performance when replacement is needed (refer to the paragraph on “Tread Wear Indicators”).

  • Page 227: Alignment And Balance

    CAUTION! Replacing original tires with tires of a different size may result in false speedometer and odometer read- ings. Alignment And Balance Poor suspension alignment may result in: • Fast tire wear. • Uneven tire wear, such as feathering and one-sided wear.

  • Page 228: Snow Tires

    228 STARTING AND OPERATING CAUTION! To avoid damage to your vehicle or tires, observe the following precautions: • Because of restricted chain clearance between tires and other suspension components, it is im- portant that only chains in good condition are used.

  • Page 229: Tire Rotation Recommendations

    TIRE ROTATION RECOMMENDATIONS Tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates, and tend to develop irregular wear pat- terns. These effects can be reduced by timely rotation of tires.

  • Page 230: Tire Rotation - All Season Tires

    230 STARTING AND OPERATING Tire Rotation — All Season Tires The suggested rotation method for vehicles equipped with all season tires is the “forward-cross” as shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The Tire Pressure Monitor System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure.
  • Page 231 • The TPM System will warn the driver of a low tire pressure if the tire pressure falls below the low- pressure warning limit for any reason, including low temperature effects. • The TPM System will continue to warn the driver of low tire pressure as long as the condition exists, and will not turn off until the tire pressure is at or above the recommended cold placard pressure.

  • Page 232: Base System - If Equipped

    232 STARTING AND OPERATING CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style.
  • Page 233 monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the Receiver Module. NOTE: It is particularly important for you to check the tire pressure in all of the tires on your vehicle regularly and to maintain the proper pressure.

  • Page 234: Premium System - If Equipped

    234 STARTING AND OPERATING vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS Warning The Tire Pressure Monitoring Telltale Light will flash on and off for 60 seconds and an audible chime will sound when a system fault is detected.
  • Page 235 (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure value. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the EVIC will stop flashing, and the Tire Pressure Monitoring Telltale Light will turn off.
  • Page 236 236 STARTING AND OPERATING active road tires. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS Warning The Tire Pressure Monitoring Telltale Light will flash on and off for 60 seconds and an audible chime will sound when a system fault is detected.

  • Page 237: General Information

    If you experience these symptoms, try another brand of “premium” gasoline before considering service for the vehicle. Over 40 automobile manufacturers around the world have issued and endorsed consistent gasoline specifica- tions (the World Wide Fuel Charter, WWFC) which...

  • Page 238: Reformulated Gasoline

    238 STARTING AND OPERATING vehicle. The manufacturer recommends the use of gaso- lines that meet the WWFC specifications if they are available. Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline”. Reformulated gasolines contain oxygenates, and are spe- cifically blended to reduce vehicle emissions and im- prove air quality.

  • Page 239: Materials Added To Fuel

    content of gasoline may not be indicated on the pump, you should ask your gasoline retailer if his/her gasoline contains MMT. It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than allowed in the United States.

  • Page 240: Carbon Monoxide Warnings

    240 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
  • Page 241 STARTING AND OPERATING 241 Fuel Filler Door Gas Cap Tether Hook NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinforcement.
  • Page 242 242 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. •...

  • Page 243: Loose Fuel Filler Cap Message

    Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic Vehicle Information Center (EVIC). If this occurs, tighten the fuel filler cap properly and press the odometer reset button to turn off the message.

  • Page 244: Gross Vehicle Weight Rating (Gvwr)

    244 STARTING AND OPERATING • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the Vehicle Identification Number (VIN). Gross Vehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, and cargo.
  • Page 245 driving. If weighing the loaded vehicle shows that you have exceeded either GAWR, but the total load is within the specified GVWR, you must redistribute the weight. Improper weight distribution can have an adverse effect on the way your vehicle steers and handles and the way the brakes operate.

  • Page 246: Trailer Towing

    246 STARTING AND OPERATING TRAILER TOWING Trailer towing with this vehicle is not recommended. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat towing with all four wheels on the ground) Recreational towing for this vehicle is not recommended. NOTE: If the vehicle requires towing, make sure all four wheels are off the ground.

  • Page 247: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....248 If Your Engine Overheats ....248 TIREFIT Tire Repair .

  • Page 248: Hazard Warning Flasher

    248 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the instrument panel below the center air outlets. Hazard Flasher Switch To engage the Hazard Warning Flashers, depress the switch on the instrument panel. When the Hazard Warn- ing Switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer- gency.

  • Page 249: Tirefit Tire Repair

    control to maximum heat, the Mode control to floor, and the fan control to HI. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle.
  • Page 250 250 WHAT TO DO IN EMERGENCIES The TIREFIT system is located under an access panel in the trunk. TIREFIT Location TIREFIT contents 1. Air pump hose 2. Power plug and cable 3. Air pump switch 4. Pressure gauge 5. TIREFIT sealant bottle 6.
  • Page 251 WARNING! • Do not attempt to repair a tire on the side of the vehicle close to traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or repairing a tire. • Cuts or punctures larger than approximately 0.16 in.
  • Page 252 252 WHAT TO DO IN EMERGENCIES 5. Unscrew the valve cap from the valve on the deflated tire. 6. Screw the fitting at the end of TIREFIT sealant hose (6) coming from the sealant bottle (5) onto the tire valve. 7.
  • Page 253 19. With a tire pressure of no less than 26 psi (1.8 bar) press the air pump switch (3) to 0 (OFF) and turn off the engine. Then, disconnect the TIREFIT system from the tire and place it back in the vehicle. 20.

  • Page 254: Jump-Starting Procedures

    254 WHAT TO DO IN EMERGENCIES • Do not operate the electric air pump for more than eight minutes to avoid overheating. The air pump may be used again once it has cooled down. • Replace the TIREFIT sealant bottle (5) once every four years to assure optimum operation of the system.
  • Page 255 NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting. 1. Wear eye protection and remove any metal jewelry such as watchbands or bracelets that might make an inadvertent electrical contact.
  • Page 256 256 WHAT TO DO IN EMERGENCIES WARNING! • You should not try to start your vehicle by push- ing or towing. • Do not connect the cable to the negative post of the discharge battery. The resulting electrical spark could cause the battery to explode. •...

  • Page 257: Freeing A Stuck Vehicle

    FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion. Turn your steering wheel right and left to clear the area around the front wheels. Then shift back and forth between Reverse and Drive.

  • Page 258: Towing A Disabled Vehicle

    258 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE WITHOUT THE IGNITION KEY Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only ap- proved method of towing without the ignition key is with a flat bed truck.

  • Page 259: Towing This Vehicle Behind Another Vehicle With A Tow Dolly

    If you must use the accessories (wipers, defrosters, etc.) while being towed, the key must be in the ON position, not the ACCESSORY position. Make certain the transmis- sion remains in NEUTRAL. WHAT TO DO IN EMERGENCIES 259 TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE WITH A TOW DOLLY The manufacture does not recommend that you tow this vehicle on a tow dolly.

  • Page 261: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE CONTENTS 6.1L Engine Compartment ....263 Onboard Diagnostic System — OBD II ..264 Loose Fuel Filler Cap ....264 Emissions Inspection And Maintenance Programs .
  • Page 262 262 MAINTAINING YOUR VEHICLE Windshield Washers ....277 Exhaust System ..... . 278 Cooling System .

  • Page 263: 6.1L Engine Compartment

    MAINTAINING YOUR VEHICLE 263 6.1L ENGINE COMPARTMENT...

  • Page 264: Maintaining Your Vehicle

    264 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emis- sions well within current government regulations.

  • Page 265: Emissions Inspection And Maintenance Programs

    A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system. Failure to pass could prevent vehicle registration.

  • Page 266: Replacement Parts

    266 MAINTAINING YOUR VEHICLE b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is ready and you can proceed to the I/M station.

  • Page 267: Maintenance Procedures

    WARNING! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
  • Page 268 268 MAINTAINING YOUR VEHICLE Engine Oil Dipstick CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Change Engine Oil Road conditions and your kind of driving affect the interval at which your oil should be changed. Check the following list to see if any apply to you.
  • Page 269 NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever comes first. Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF, and meet the requirements of DaimlerChrysler Material Standard MS-10725.

  • Page 270: Engine Oil Filter

    270 MAINTAINING YOUR VEHICLE Disposing of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present a problem to the environment.

  • Page 271: Engine Air Cleaner Filter

    Engine Air Cleaner Filter For normal driving conditions, inspect and replace the engine air cleaner filter at the intervals shown on Sched- ule “A.” For vehicles driven frequently in dusty or under severe conditions, inspect and replace the engine air cleaner filter at the intervals shown on Schedule “B.”...
  • Page 272 272 MAINTAINING YOUR VEHICLE CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly. Contin- ued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and the...

  • Page 273: Maintenance-Free Battery

    • Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idling or malfunctioning operating conditions. Maintenance-Free Battery The top of the MAINTENANCE-FREE battery is perma- nently sealed.

  • Page 274: Air Conditioner Maintenance

    274 MAINTAINING YOUR VEHICLE WARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water.

  • Page 275: A/C Air Filter - If Equipped

    WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information book for further warranty information.

  • Page 276: Power Steering - Fluid Check

    276 MAINTAINING YOUR VEHICLE Refer to the “Maintenance Schedule” in this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated.

  • Page 277: Windshield Wiper Blades

    The external lock cylinders should be lubricated twice a year, preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar Lock Cylinder Lubricant or equivalent directly into the lock cylinder. Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner.

  • Page 278: Exhaust System

    278 MAINTAINING YOUR VEHICLE Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken,...
  • Page 279 accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the condenser. Check the coolant recovery bottle tubing for brittle rub- ber, cracking, tears, cuts, and tightness of the connection at the bottle and radiator.
  • Page 280 280 MAINTAINING YOUR VEHICLE CAUTION! • Mixing of coolants other than specified HOAT engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOAT coolant is introduced into the cooling system in an emergency, it should be replaced with the speci- fied coolant as soon as possible.
  • Page 281 NOTE: Mixing coolant types will decrease the life of the engine coolant and will require more frequent coolant changes. Cooling System Pressure Cap The cap must be fully tightened to prevent loss of coolant, and to insure that coolant will return to the radiator from the coolant recovery bottle.
  • Page 282 282 MAINTAINING YOUR VEHICLE ground. If ingested by a child, contact a physician immediately. Clean up any ground spills immediately. Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. With the engine off and cold, the level of the coolant in the bottle should be between the ranges indicated on the bottle.

  • Page 283: Hoses And Vacuum/Vapor Harnesses

    • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. •...

  • Page 284: Brake System

    284 MAINTAINING YOUR VEHICLE Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Suggested service intervals can be found in the “Mainte- nance Schedules” in this manual. WARNING! Riding the brakes can lead to brake failure and possibly an accident.
  • Page 285 WARNING! Worn brake hoses can burst and cause brake failure. You could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately. Master Cylinder — Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system fail- ure.

  • Page 286: Automatic Transmission

    286 MAINTAINING YOUR VEHICLE CAUTION! Do not allow petroleum base fluid to contaminate the brake fluid, all brake seal components could be damaged causing partial or complete brake failure. Automatic Transmission Fluid Level Check Regular automatic transmission fluid level checks are not required.

  • Page 287: Front And Rear Wheel Bearings

    Severe Usage (fluid and filter) — Refer to Maintenance Schedule “B” Severe Usage is defined as: • Police, taxi, limousine, commercial type operation, or trailer towing where the vehicle is driven regularly for more than 45 minutes of continuous operation. If the transmission is disassembled for any reason, the fluid and filter should be changed.
  • Page 288 288 MAINTAINING YOUR VEHICLE • Stone and gravel impact. • Insects, tree sap, and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using Mopar Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
  • Page 289 • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. •...
  • Page 290 290 MAINTAINING YOUR VEHICLE WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed.

  • Page 291: Cleaning The Center Console Cup Holders

    If the belts need cleaning, use Mopar Total Clean, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them. Replace the belts if they appear frayed or worn or if the buckles do not work properly. Cleaning The Center Console Cup Holders Perform the following steps to clean the center console cup holders:...
  • Page 292 292 MAINTAINING YOUR VEHICLE Cavity Car- Mini Description tridge Fuse Fuse — — — — — — — 15 Amp Adjustable Pedals - if Blue equipped — 20 Amp AC Clutch/Horn Yellow — — — — 15 Amp Front Control Module Blue (FCM) —...

  • Page 293: Fuses (Rear Power Distribution Center)

    Cavity Car- Mini Description tridge Fuse Fuse 20 Amp — Starter Blue 50 Amp — Anti-lock Brakes System (ABS) Pump Motor 40 Amp — AC Clutch/Radiator Fan Green High — Low — — — 60 Amp — Radiator Fan Yellow 30 Amp —...
  • Page 294 294 MAINTAINING YOUR VEHICLE Rear Power Distribution Center Cavity Car- Mini Description tridge Fuse Fuse 60 Amp — Ignition Off Draw (IOD) Yellow 40 Amp — Battery Green — — — 40 Amp — Battery Green Cavity Car- Mini Description tridge Fuse Fuse...
  • Page 295 Cavity Car- Mini Description tridge Fuse Fuse — 20 Amp Cluster Yellow — 20 Amp Selectable Power Outlet Yellow — 10 Amp Stop Lights — — — — — — — — — — — — — — — — —...
  • Page 296 296 MAINTAINING YOUR VEHICLE Cavity Car- Mini Description tridge Fuse Fuse — 5 Amp Amplifier - if equipped/ Orange Antenna/Ignition Delay/Overhead Console/Passenger Door Lock & Express Power Window Switch - if equipped/Power Mir- rors - if equipped/Rear Defrost — 20 Amp Hands Free Phone - if Yellow equipped/Media System...

  • Page 297: Vehicle Storage

    Cavity 13. If you experience temporary or permanent loss of these systems, see your authorized dealer for service. CAUTION! • When installing the Power Distribution Center cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center, and possibly result in an electrical system failure.

  • Page 298: Replacement Light Bulbs

    298 MAINTAINING YOUR VEHICLE REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Rear Courtesy/Reading Lights....W5W Rear Compartment (Trunk) Light ... . . 562 Overhead Console Reading Lights.

  • Page 299: Bulb Replacement

    BULB REPLACEMENT Low Beam Headlight, High Beam Headlight, Park/Turn Light, and Front Side Marker Light 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assem- bly on the driver side of the vehicle. 2.
  • Page 300 300 MAINTAINING YOUR VEHICLE 3 — Park/Turn Light Bulb 4 — Side Marker Light Bulb CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.

  • Page 301: Backup Light, Side Marker Light, Tail/Turn Light, And Tail/Stop Light

    Backup Light, Side Marker Light, Tail/Turn Light, and Tail/Stop Light 1. Open the Trunk. 2. Remove two fasteners from the back of the tail light assembly. 3. Pull back the trunk liner. 4. Remove the remaining fastener from the back of the tail light assembly.
  • Page 302 302 MAINTAINING YOUR VEHICLE 1 — Backup Light Bulb 2 — Side Marker Light Bulb...
  • Page 303 MAINTAINING YOUR VEHICLE 303 3 — Tail/Turn Light Bulb 4 — Tail/Stop Light Bulb 9. Pull the bulb out of the socket assembly. 10. Push the replacement bulb into the socket assembly. 11. Reinstall the bulb and socket assembly into the tail light assembly, and then turn it clockwise.

  • Page 304: License Light

    304 MAINTAINING YOUR VEHICLE License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly. 3. Pull the bulb out of the socket assembly. 1 — License Light Bulb 2 — Socket 4.

  • Page 305: Fluids, Lubricants, And Genuine Parts

    FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or- ganic Additive Technology) or equivalent Engine Oil (6.1 Liter) For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF, and meet the requirements of DaimlerChrysler Material Standard MS-10725.

  • Page 306: Chassis

    306 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transmission Brake Master Cylinder Power Steering Reservoir Rear Axle Fluids, Lubricants, and Genuine Parts Mopar ATF+4 Automatic Transmission Fluid. Mopar DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
  • Page 307 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..308 Maintenance Schedules ....308 Schedule “B” ......311 Schedule “A”...

  • Page 308: Emission Control System Maintenance

    308 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
  • Page 309 • Taxi, police, or delivery service (commercial ser- vice). • Off-road or desert operation. NOTE: If ANY of these apply to you, then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in Schedule “B”...
  • Page 310 310 MAINTENANCE SCHEDULES • Inspect the battery, and clean, and tighten the termi- nals as required. • Check the fluid levels of coolant reservoir and brake master cylinder, and add as needed. • Check all lights and all other electrical items for correct operation.

  • Page 311: Schedule "B

    SCHEDULE “B” Follow Schedule “B” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an •...
  • Page 312 312 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors.
  • Page 313 Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and replace, if necessary, the PCV valve.
  • Page 314 314 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors.
  • Page 315 Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and Inspect the accessory drive belt and tensioner.
  • Page 316 316 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors.
  • Page 317 Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the spark plugs.
  • Page 318 318 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and replace, if necessary, the PCV valve.
  • Page 319 Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and Inspect the accessory drive belt and ten- sioner.
  • Page 320 320 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Change the rear axle fluid.

  • Page 321: Schedule "A

    SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the air conditioning filter. Rotate the tires.
  • Page 322 322 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and Inspect the accessory drive belt and tensioner.
  • Page 323 Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and Inspect the accessory drive belt and ten- sioner.
  • Page 324 324 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Check and Inspect the accessory drive belt and ten- sioner.
  • Page 325 Miles (Kilometers) [Months] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the air conditioning filter. Rotate the tires. * This maintenance is recommended by the manufacturer to the owner but is not required to maintain the emis- sions warranty.

  • Page 327: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle ......328 Prepare For The Appointment .

  • Page 328: Suggestions For Obtaining Service For Your Vehicle

    We want you to be happy with our products and services. Warranty service must be done by an authorized Chrysler, Dodge, or Jeep dealer. We strongly recommend that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
  • Page 329 • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center. Any communication to the Manufacturer’s Customer Center should include the following information: •...

  • Page 330: Warranty Information (U.s. Vehicles Only)

    330 IF YOU NEED CONSUMER ASSISTANCE Service Contract You may have purchased a service contract for your vehicle to help protect you from the high cost of unex- pected repairs after your manufacturer’s new vehicle limited warranty expires. The manufacturer stands be- hind only the manufacturer’s Service Contracts.

  • Page 331: Reporting Safety Defects

    REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer.

  • Page 332: Department Of Transportation Uniform Tire Quality Grades

    332 IF YOU NEED CONSUMER ASSISTANCE Corporation vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, dia- grams, and charts. • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and features.

  • Page 333: Treadwear

    Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled con- ditions on a specified government test course. For ex- ample, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100.
  • Page 334 334 IF YOU NEED CONSUMER ASSISTANCE WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
  • Page 335 INDEX...
  • Page 336 336 INDEX ABS (Anti-Lock Brake System) ... . . 204 Adding Engine Coolant (Antifreeze) ..280 Adding Fuel ......240 Adding Washer Fluid .
  • Page 337 Fluid Type ......306 Shifting ......196 Special Additives .
  • Page 338 338 INDEX Check Engine Light (Malfunction Indicator Light) ....... 265 Child Restraint .
  • Page 339 Door Locks ......20 Door Locks, Automatic ....22 Door Opener, Garage .
  • Page 340 340 INDEX Exterior Lighting ......90 Filters Air Cleaner ......271 Air Conditioning .
  • Page 341 Gas Cap (Fuel Filler Cap) ....240,264 Gasoline, Clean Air ..... 238 Gasoline (Fuel) .
  • Page 342 342 INDEX Instrument Panel and Controls ... . . 122 Instrument Panel Lens Cleaning ... . 290 Interior Appearance Care ....289 Interior Fuses .
  • Page 343 High Beam ......93,127 High Beam Indicator ....127 Illuminated Entry .
  • Page 344 344 INDEX Automatic Dimming ....62 Electric Remote ..... . . 64 Exterior Folding .
  • Page 345 Pets ........54 Phone, Cellular ......65 Phone, Hands-Free (UConnect™) .
  • Page 346 346 INDEX Restraint, Head ......86 Restraints, Child ......46 Restraints, Occupant .
  • Page 347 Shoulder Belts ......29 Side Airbag ......42 Signals, Turn .
  • Page 348 348 INDEX Alignment ......227 Chains ......227 General Information .
  • Page 349 Untwisting Procedure, Seat Belt ... . . 34 Vanity Mirrors ......64 Variance, Compass .
  • Page 350 NOTES...
  • Page 351 NOTES...
  • Page 352 NOTES...

This manual is also suitable for:

2007 lx charger srt8

Table of Contents

Save PDF