Dodge 2007 Caliber Owner's Manual
  1. Manuals
  2. Brands
  3. Dodge Manuals
  4. Automobile
  5. 2007 Caliber
  6. Owner's manual

Dodge 2007 Caliber Owner's Manual

Dodge 2007 automobile owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

SECTION
1

INTRODUCTION

2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3
4
5
6
7
8
9
10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 319
. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337
PAGE
1
2
3
4
5
6
7
8
9
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2007 Caliber and is the answer not in the manual?

Questions and answers

Katy Ingle
June 12, 2025

What does this button do?

User image 684a2c2c01615
0

Subscribe to Our Youtube Channel

Related Manuals for Dodge 2007 Caliber

Summary of Contents for Dodge 2007 Caliber

  • Page 1: Table Of Contents

    TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 3 CONTENTS Introduction ......4 How To Use This Manual ....4 Warnings And Cautions .

  • Page 4: Introduction

    4 INTRODUCTION INTRODUCTION This manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a Warranty Information Booklet and various customer oriented documents. You are urged to read these publications carefully.
  • Page 5 INTRODUCTION 5...

  • Page 6: Warnings And Cautions

    6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.

  • Page 7: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....9 Ignition Key Removal ....9 Locking Doors With The Key .
  • Page 8 8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Turn Off “Flash Lights With Lock” ..21 Programming Additional Transmitters ..22 General Information ....23 Battery Replacement .

  • Page 9: Things To Know Before Starting Your Vehicle 7

    A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer. Ask your dealer for these numbers and keep them in a safe place.

  • Page 10: Locking Doors With The Key

    10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ignition cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service. WARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.

  • Page 11: Sentry Key - If Equipped

    SENTRY KEY — IF EQUIPPED The Sentry Key Immobilizer System prevents unautho- rized operation of the vehicle by disabling the engine. The system will shut the engine off after two (2) seconds of running if an invalid key is used to start the vehicle. This system utilizes ignition keys, which have an elec- tronic chip (transponder) embedded into them.

  • Page 12: Replacement Keys

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE All of the keys provided with your new vehicle have been programmed to the vehicle electronics. Replacement Keys NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it cannot be programmed to any other vehicle.

  • Page 13: General Information

    Repeat this procedure to program up to 8 keys. If you do not have a programmed sentry key, contact your dealer for details. General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: •...

  • Page 14: Automatic Transaxle Ignition Interlock System

    14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Transaxle Ignition Interlock System This system prevents the key from being removed unless the shift lever is in PARK. It also prevents shifting out of PARK unless the key is in the ACC, or ON positions, and the brake pedal is depressed.

  • Page 15: Power Door Locks - If Equipped

    WARNING! When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Unsupervised use of vehicle equipment may cause severe personal inju- ries and death.
  • Page 16 16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Lock Switches Automatic Door Locks—If Equipped The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2.
  • Page 17 Ignition Key Position 3. Depress the power door lock switch to lock the doors. 4. Verify reprogramming by driving the vehicle. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Auto Unlock The doors will unlock automatically on vehicles with power door locks if: 1.

  • Page 18: Child-Protection" Door Lock System (Rear Doors)

    18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For vehicles not equipped with the EVIC the Auto Unlock Feature can be enabled or disabled by performing the following procedure: 1. Close all doors and place the key in the ignition. 2.

  • Page 19: Remote Keyless Entry - If Equipped

    Inserting Ignition Key WARNING! Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down window and open the door with the outside door handle.

  • Page 20: To Unlock The Doors And Liftgate

    20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To unlock the doors and liftgate: Press and release the UNLOCK button on the key fob once to unlock only the driver’s door or twice to unlock all the doors and liftgate. When the UNLOCK button is pressed, the illuminated entry will initiate, and the parking lights will flash on twice.

  • Page 21: To Lock The Doors And Liftgate

    To lock the doors and liftgate: Press and release the LOCK button on the transmitter to lock all doors. The turn signal lights will flash and the horn will chip once to acknowledge the lock signal. If desired, the “Sound Horn On Lock” feature can be turned on or off.

  • Page 22: Programming Additional Transmitters

    22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Test the flash lamps with LOCK feature while outside of the vehicle, by pressing the LOCK button on the key fob with the ignition in the LOCK position, and the key removed.

  • Page 23: General Information

    9. A single chime will be heard. 10. Within four seconds of hearing the chime, press and release the UNLOCK button on the fob. 11. A single chime will be heard. 12. Repeat steps 8 through 10 to program up to six additional fobs.

  • Page 24: Security Alarm System - If Equipped

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. If the key fob is equipped with a screw, remove the screw. With the transmitter buttons facing down, use a flat blade to pry the two halves of the transmitter apart. Make sure not to damage the elastomer seal during removal.

  • Page 25: To Set The Alarm

    To set the alarm: 1. Remove the keys from the ignition switch and get out of the vehicle. 2. Lock the door using either the door key, power door lock switch, or the Keyless Entry Transmitter and close all doors. 3.

  • Page 26: Liftgate

    26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate. To unlock the liftgate, insert the key into the lock and turn to the right (manual lock models only).

  • Page 27: Power Windows- If Equipped

    WARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed.

  • Page 28: Auto Down

    28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Down The driver’s window switch has an Auto Down feature. Push the window switch past the first detent, release, and the window will go down automatically. To cancel the Auto Down movement, operate the switch in either the up or down direction and release the switch.

  • Page 29: Lap/Shoulder Belts

    If your vehicle is equipped with the Occupant Classifi- cation System (OCS) there will be a Passenger Airbag Disabled (PAD) Indicator Light located on the center of the instrument panel. Please pay close attention to the information in this section. It tells you how to use your restraint system properly to keep you and your passengers as safe as possible.
  • Page 30 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
  • Page 31 Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the belt.
  • Page 32 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you.

  • Page 33: Adjustable Upper Shoulder Belt Anchorage

    WARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug.

  • Page 34: Second Row Center Lap/Shoulder Belt Operating Instructions

    34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Anchorage As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
  • Page 35 2. Grasp the mini latch plate and pull the belt over the seat. 3. Route the shoulder belt to the inside of the right head restraint. Routing The Rear Center Shoulder Belt THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Routing The Rear Center Shoulder Belt 4.
  • Page 36 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Connecting Mini Latch to Buckle 7. Position the lap belt across your thighs, below your abdomen.

  • Page 37: Seat Belt Pretensioners

    Detaching Mini Latch and Buckle 10. To disengage the mini latch from the mini buckle for storage, insert the regular latch plate into the black button on the top of the mini buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
  • Page 38 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE belt. The driver should also instruct all other occupants to buckle their seat belts. Once the warning is triggered, the Enhanced Warning System (BeltAlert) will continue to chime and flash the Seat Belt Warning Light for 96 seconds or until the driver’s seat belt is buckled.

  • Page 39: Seat Belts And Pregnant Women

    Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible.
  • Page 40 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity and occupant size. Also, the front passenger airbag is certified to the Federal regulations that define Occupant Classification (Refer to Occupant Classification System in this section).
  • Page 41 Airbags inflate in moderate to high speed impacts. Along with seat belts and pretensioners, front airbags work with the driver inflatable knee blocker and the integrated passenger knee blocker (non-inflatable) to provide im- proved protection for the driver and front passenger. Side airbags also work with seat belts to improve occupant protection.
  • Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If a child from 1 to 12 years old must ride in the front passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child restraint.
  • Page 43 • Driver Airbag • Passenger Airbag • Front Seat Mounted Side Airbags (If equipped) • Side Curtain Airbags • Steering Wheel and Column • Instrument Panel • Interconnecting Wiring • Knee Impact Bolsters • Driver Inflatable Knee Blocker • Front Acceleration Sensors •...
  • Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE During a moderate-to-severe rear impact the ORC may deploy the seat belt pretensioners alone. Also, the ORC turns on the AIRBAG warn- ing light and PAD indicator light in the instrument panel for 6 to 8 seconds for a self-check when the ignition is first turned on.
  • Page 45 when the front passenger airbag is turned off. The PAD Indicator lamp illuminates the words PASS AIR BAG OFF to show that the front passenger airbag will not inflate during a collision requiring airbags. When the right front passenger seat is empty or when very light objects are placed on the seat, the passenger air bag will not inflate even though the Passenger Airbag Disable (PAD) indicator lamp is not illuminated.
  • Page 46 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Passenger Air- Front Passenger bag Disable Seat Occupant (PAD) Indicator Light Adult Child Grocery Bags, Heavy Briefcases and Other Rela- tively Light Ob- jects Empty or Very OFF* Small Objects * Since the system senses weight, some small objects will turn the PAD Indicator Light on.
  • Page 47 sensors, a fault will occur which turns on both the PAD Indicator Light and the Airbag Warning Light. Once the lodged object is removed, the fault will be automatically cleared after a short period of time. • The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel.
  • Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC Module monitors the readiness of the elec- tronic parts of the system whenever the ignition switch is in the START or ON positions. These include all of the items previously mentioned. In moderate to severe side collisions, the side airbag inflator on the crash side of the vehicle is triggered, releasing a quantity of nontoxic gas.
  • Page 49 • Do not modify the front seat center console or center position seat in any way. • Do not use prior or future model year seat covers not designated for the specific model being repaired. Al- ways use the correct seat cover specified for the vehicle.
  • Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and front passenger as the airbags deploy and unfold.
  • Page 51 • Turns on the interior lamps which remain on as long as the battery has power or until the ignition key is removed. • Unlocks the doors automatically THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Maintaining Your Airbag System WARNING! •...
  • Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Airbag Light You will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately.
  • Page 53 (usually the vehicle owner or lessee) before accessing the electronic data stored, unless ordered to download data by a court with legal jurisdiction (i.e., pursuant to a warrant). A copy of the data will be provided to the custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the US government and various states.

  • Page 54: Child Restraint

    54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces require that small children ride in proper restraint systems. This is the law, and you can be prosecuted for ignoring it.
  • Page 55 infant carriers do, so they can be used rearward-facing by children who weigh more than 20 lbs. (9 kg) but are less than one year old. • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a front passenger airbag.
  • Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards.
  • Page 57 • Buckle the child into the seat according to the child restraint manufacturer’s directions. • When your child restraint is not in use, secure it in the vehicle with the seat belt or remove it from the vehicle. Don’t leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seat backs and cause serious personal injury.
  • Page 58 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraints in adjacent rear seating positions, you can use the LATCH anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position. If your child restraints are not LATCH-compatible, you can only install the child re- straints using the vehicle’s seat belts.
  • Page 59 reach. If the buckled seat belt interferes with the child restraint installation, instead of tucking the seat belt behind the child restraint, route the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
  • Page 60 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor position directly behind the child seat to secure a child restraint top tether strap.

  • Page 61: Engine Break-In Recommendations

    ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-throttle acceleration, within the limits of local traffic laws, contributes to a good break-in.

  • Page 62: Safety Checks You Should Make Inside The Vehicle

    62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. WARNING! If you are required to drive with the deck lid / liftgate open, make sure that all windows are closed,...
  • Page 63 Lights Have someone observe the operation of exterior lights while you work the controls. Check turn signal and high beam indicator lights on the instrument panel. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil or other fluid leaks.

  • Page 65: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......69 Inside Day/Night Mirror — If Equipped ..69 Outside Mirror—Driver’s Side .
  • Page 66 66 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold Flat Front Passenger Seat ... . .98 Folding Rear Seat ..... .99 Reclining Rear Seat —...
  • Page 67 Garage Door Opener — If Equipped ..112 Programming The Universal Transceiver ..113 “Rolling Code” Programming ... . 114 Canadian Programming/ Gate Programming .
  • Page 68 68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Light/Removable Self- Recharging Flashlight – If Equipped ....128 Tonneau Cover — If Equipped ... . 130 Removable Load Floor .

  • Page 69: Mirrors

    MIRRORS Inside Day/Night Mirror — If Equipped Adjust the mirror to center on the view through the rear window. A two point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).

  • Page 70: Understanding The Features Of Your Vehicle

    70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Electric Remote-Control Mirrors The controls for the power mirrors are located on the driver’s door trim panel. Remote Control Mirrors Switch Mirror Directions To adjust a mirror, turn the control wand toward the left or right mirror positions indicated.

  • Page 71: Vanity Mirrors - If Equipped

    WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror.

  • Page 72: Hands-Free Communication (Uconnect™) - If Equipped

    72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE HANDS–FREE COMMUNICATION (UConnect™) — IF EQUIPPED UConnect™ is a voice-activated, hands-free, in- vehicle communications system. UConnect™ allows you to dial a phone number with your cellular phone using simple voice commands (e.g., Call” “Mike” ”Work or Dial” “248-555-1212 ).

  • Page 73: Operations

    UConnect™ Switches The UConnect™ system can be used with any Hands- Free Profile certified Bluetooth™ cellular phone. See www.chrysler.com/uconnect for supported phones. If your cellular phone supports a different profile (e.g., Headset Profile), you may not be able to use any UCon- nect™...
  • Page 74 To complete the pairing process, you will need to refer- ence your cellular phone owner’s manual. One of the following vehicle specific websites may also provide detailed instructions for pairing with the brand of phone that you have: NOTE: • www.chrysler.com/uconnect • www.dodge.com/uconnect...
  • Page 75 • www.jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the Ready prompt and the following beep, say Setup Phone Pairing and follow the audible prompts. • When prompted, after the voice on beep, say Pair a Phone and follow the audible prompts.
  • Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE from dialing invalid combination of numbers. For example, in USA, 234-567-890 is nine digits long, which is not a valid USA phone number - the closest valid phone number has ten digits. • The UConnect™ system will confirm the phone num- ber and then dial.
  • Page 77 After you are finished adding an entry into the phone- book, you will be given the opportunity to add more phone numbers to the current entry or to return to the main menu. The UConnect™ system will allow you to enter up to 32 names in the phonebook with each name having up to four associated phone numbers and designations.
  • Page 78 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE entry that you wish to delete or you can say List Names to hear a list of the entries in the phonebook from which you choose. To select one of the entries from the list, press the Voice Recognition button while the UConnect™...

  • Page 79: Phone Call Features

    Phone Call Features The following features can be accessed through the UConnect™ system if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way calling, this feature can be accessed through the UConnect™ system. Check with your cellular service provider for the features that you have.
  • Page 80 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Toggling Between Calls If two calls are in progress (one active and one on hold), press the ’Phone’ button until you hear a single beep indicating that the active and hold status of the two calls have switched.

  • Page 81: Uconnect™ System Features

    until the vehicle battery condition dictates cessation of the call on the UConnect™ system and transfer of the call to the mobile phone. • After ignition key is switched to off, a call can continue on the UConnect™ system for certain duration, after which the call is automatically transferred from the UConnect™...
  • Page 82 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE the paired cellular phone to call the emergency num- ber. This feature is only supported in the USA. NOTE: The emergency number dialed is based on the Country where the vehicle is purchased (911 for USA and Canada and 060 for Mexico).
  • Page 83 You can use your UConnect™ system to access a voice- mail system or an automated service, such as, paging service or automated customer service. Some services require immediate response selection, in some instances, that may be too quick for use of UConnect™ system. When calling a number with your UConnect™...

  • Page 84: Advanced Phone Connectivity

    84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measures).
  • Page 85 Connect or Disconnect Link Between the UConnect™ System and Cellular Phone Your cellular phone can be paired with many different electronic devices, but can only be actively connected with one electronic device at a time. If you would like to connect or disconnect the Blue- tooth™...

  • Page 86: Things You Should Know About Your Uconnect™ System

    86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Delete UConnect™ Paired Cellular Phones • Press the ’Phone’ button to begin. • After the Ready prompt and the following beep, say Setup Phone Pairing. • At the next prompt, say Delete and follow the prompts.
  • Page 87 • Performance is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, • dry weather condition. • In a convertible vehicle, the system performance may be compromised with roof top down. •...
  • Page 88 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Operation from driver seat. • In a convertible vehicle, the system performance may be compromised with roof top down. • Performance, such as audio clarity, echo, and loudness to a large degree rely on the phone and network, and not the UConnect™...
  • Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89...
  • Page 90 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91...
  • Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE North American English Primary Alternate(s) Zero Three Four Five Seven Eight Nine Star (*) Plus (+) Pound (#) Add Location Call Cancel Confirmation Prompts Continue Delete Dial Edit Emergency English Erase All Espanol Francais Help Home...

  • Page 93: General Information

    Pair a phone Phone pairing Pairing Phonebook Phone book Previous Record again Redial Return to main menu Return. Main menu Select phone Select Send Set up Phone settings / Phone set up Towing assistance Transfer call Try again Voice training Work UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 General Information...

  • Page 94: Seats

    94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS Front Seat Adjustment The adjusting bar is at the front of the seats, near the floor. Pull the bar up to move the seat to the desired position. Front Seat Adjustment Using body pressure, move forward and rearward on the seat to be sure the seat adjusters have latched.

  • Page 95: Manual Seat Height Adjustment - If Equipped

    Manual Seat Height Adjustment — If Equipped The driver’s seat height can be raised or lowered by using the ratcheting handle on the outboard side of the seat to adjust the driving position. Seat Height Adjustment UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Manual Lumbar—...

  • Page 96: Driver's Seat Back Recline

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Seat Back Recline To recline: 1. Lean forward before lifting the handle, then lean back to the desired position and release the handle. 2. Lift the handle to return the seatback to an upright position.

  • Page 97: Heated Seats - If Equipped

    Heated Seats — If Equipped WARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.

  • Page 98: Fold Flat Front Passenger Seat

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The heat output then drops to the normal high-temperature level. If high-level heating is selected, the system will automati- cally switch to the low level after about 30 minutes of continuous operation.

  • Page 99: Folding Rear Seat

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Folding Rear Seat To provide additional storage area, each rear seatback can be folded forward. Pull the strap forward to move the seat forward and flat. Front Passenger Seat Folded Flat Folding Rear Seat...

  • Page 100: Reclining Rear Seat - If Equipped

    100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reclining Rear Seat — If Equipped Rear Seat Folded Flat Reclining The Rear Seat For additional comfort, pull the strap forward just enough to release the seatback latch. Then push the seatback to a reclined position, approximately 35 degrees maximum, and release the strap.

  • Page 101: To Open And Close The Hood

    WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts •...

  • Page 102: Lights

    102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Then move the safety catch located under the front edge of the hood, near the center and raise the hood. Secondary Hood Latch Location Lift the hood prop rod, clipped to the left side (right side facing hood) of the engine compartment, to secure the hood in the open position.

  • Page 103: Multi-Function Control Lever

    Map/Reading Lights NOTE: The lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle. They will not turn off automatically. Multi-Function Control Lever The Multi-Function Control Lever controls the operation of the headlights, parking lights, turn signals, headlight beam selection, instrument panel light dimming, interior lights, the passing lights, and fog lights.

  • Page 104: Lights-On Reminder

    104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To change the brightness of the instrument panel lights, rotate the center portion of the Multi-Function Control Lever up or down. Dimmer Control Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OFF, a chime will sound to alert the driver when the driver’s door is opened.

  • Page 105: Turn Signals

    Turn Signals Turn Signal Control Move the Multi-Function Control Lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. You can signal a lane change by moving the lever partially up or down without moving beyond the detent.

  • Page 106: Passing Light

    106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Passing Light You can signal another vehicle with your headlights by lightly pulling the Multi-Function Control Lever toward you. This will cause the headlights to turn on at high beam and remain on until the lever is released. NOTE: If the Multi-Function Control Lever is held in the flash to pass position for more than 15 seconds, the high beams will shut off.

  • Page 107: Mist Feature

    Washer Control Mist Feature Push down on the wiper control lever to activate a single wipe to clear the windshield of road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Mist Control CAUTION!

  • Page 108: Windshield Wiper Operation

    108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Operation Turn the end of the handle to select the desired wiper speed. Wiper Control Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable.

  • Page 109: Electronic Speed Control - If Equipped

    Tilt Steering Control WARNING! Tilting the steering column while the vehicle is moving is dangerous. Without a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 ELECTRONIC SPEED CONTROL —...

  • Page 110: To Activate

    110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate: Push the ON/OFF button. The CRUISE indicator in the instrument cluster will illuminate. To turn the system OFF, push the ON/OFF button a second time. The CRUISE indicator will turn off. The system should be turned OFF when not in use.

  • Page 111: Manual Transaxle

    To decrease speed while speed control is ON, push down and hold “SET DECEL”. Release the lever when the desired speed is reached, and the new speed will be set. Tapping the “SET DECEL” button once will result in a 1 mph (2 km/h) speed decrease.

  • Page 112: Garage Door Opener - If Equipped

    112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED NOTE: The HomeLink system will be disabled if the Vehicle Theft Alarm (if equipped) is in the Armed or Alarming state. The HomeLink system will only operate when the Vehicle Theft Alarm (if equipped) is in the Disarmed mode.

  • Page 113: Programming The Universal Transceiver

    WARNING! A moving garage door can cause injury to people and pets in the path of the door. People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse”...

  • Page 114: Rolling Code" Programming

    114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Choose one of the three Universal Transceiver buttons to program. Place the hand held controller one to three inches from the Universal Transceiver while keeping its indicator light in view. Proper Transceiver Training Distance 4.
  • Page 115 On garage door openers with the “Rolling Code” feature, the transmitter code changes after each use to prevent the copying of your code. To check if your device is protected by a “Rolling Code” system: • Check the owner’s manual for the device for mention of “Rolling Codes”.

  • Page 116: Canadian Programming/Gate Programming

    116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Canadian Programming/Gate Programming Canadian frequency laws, and the technology of some entry gates, require you to press and release the hand held transmitter button every two seconds during pro- gramming. Continue to press and hold the Universal Transceiver button while you press and release the hand held trans- mitter button until the frequency signal has been learned.

  • Page 117: Anti-Lock Brake System (Abs) - If Equipped

    1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause undesired operation. NOTE: Changes or modifications not expressly ap- proved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • Page 118: Electronic Brake Control System - Abs/Tcs/Bas/Esp - If Equipped

    118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRONIC BRAKE CONTROL SYSTEM - ABS/TCS/BAS/ESP — IF EQUIPPED If your vehicle is equipped with the advanced electronic brake control system that includes Anti-Lock Brake Sys- tem (ABS), Traction Control System (TCS) Brake Assist System (BAS), and Electronic Stability Program (ESP).

  • Page 119: Esp (Electronic Stability Program) - If Equipped

    WARNING! • BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The BAS cannot prevent accidents, including those resulting from excessive speed in turns, following another vehicle too closely, or hydro- planing.
  • Page 120 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Electronic Stability Program (ESP) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. • ESP cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
  • Page 121 WARNING! In the Partial ESP mode, the engine torque reduction and stability features are desensitized. Therefore, the enhanced vehicle stability offered by ESP is unavailable. NOTE: To improve the vehicle’s traction when driving with snow chains, or starting off in deep snow, sand or gravel, it may be desirable to switch to the “Partial ESP”...

  • Page 122: Power Sunroof - If Equipped

    122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED The power sunroof switch is located in the reading lamp. Power Sunroof Switch WARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.

  • Page 123: Opening Sunroof - Manual

    OPENING SUNROOF – MANUAL To open the sunroof, press and hold the switch rearward to full open. Any release of the switch will stop the movement and the sunroof will remain in a partial open condition until the switch is pushed and held rearward again.

  • Page 124: Venting Sunroof - Express

    124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE VENTING SUNROOF – EXPRESS Press and hold the “V” button, and the sunroof will open to the vent position. This is called Express Vent, and will occur regardless of the sunroof position. During Express Vent operation, any movement of the switch will stop the sunroof.
  • Page 125 WARNING! To Avoid Serious Injury or Death: • Do not use a 3 - Prong Adaptor. • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use, and while driving the vehicle •...

  • Page 126: Electrical Outlet Use With Engine Off

    126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Outlet 115 Volts (150 Watt) Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e. cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.

  • Page 127: Console Features

    CONSOLE FEATURES WARNING! Do not operate this vehicle with the console com- partment lid in the open position. Cell phones, music players, and other hand held electronic de- vices should be stowed while driving. Use of these devices while driving can cause an accident due to distraction, resulting in death or injury.

  • Page 128: Cargo Area Features

    128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Cargo Light/Removable Self- Recharging Flashlight – If Equipped The dual-function light is mounted in the headliner above the cargo area to illuminate the cargo area, and part of it snaps out of the bezel to serve as a flashlight when needed.
  • Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Removing Flashlight Three Press Switch...

  • Page 130: Tonneau Cover - If Equipped

    130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tonneau cover — If Equipped The cargo area trim panels include two notches for mounting the available tonneau cover that accommo- dates the reclining rear seat. WARNING! In an accident a cargo cover loose in the vehicle could cause injury.
  • Page 131 WARNING! • Cargo tie-down Loops are not safe anchors for a child seat tether strap. In a sudden stop or colli- sion a loop could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers.

  • Page 132: Fold Down Speakers - If Equipped

    132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold Down Speakers – If Equipped When the liftgate is open, the speakers can swing down of the trim panel to face rearward, for tailgating and other activities. Fold Down Speakers REAR WINDOW FEATURES Rear Window Wiper/Washer A switch on the right side of the steering column controls operation of the rear wiper/washer function.
  • Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 If the rear wiper is operating when the ignition is turned OFF, the wiper will automatically return to the “Park” position if power accessory delay is active. Power acces- sory delay can be cancelled by opening the door, if this happens the rear wiper will stop at its current position and will not go to park.

  • Page 134: Rear Window Defroster

    134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Window Defroster Rear Wiper And Defroster Grid CAUTION! Use care when washing the inside of the rear win- dow to prevent damage to heating elements. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements.
  • Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 To operate the beverage cooler, pull the slide control about 1/2 inch (12 mm) toward the passenger compart- ment. This will allow cool air to enter the beverage cooler. To shut off the beverage cooler when not in use, push the slide control back 1/2 inch (12 mm).
  • Page 136 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicles without air conditioning can use that space for storage. The lower bin holds the owner’s manual and other important documents. Another storage bin is lo- cated on the outboard side of the steering wheel can hold small items like parking cards for easy access.

  • Page 137: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....141 Instrument Cluster—Base ....142 Instrument Cluster—Premium .
  • Page 138 138 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Digital Clock ....161 Clock Setting Procedure ....162 Sales Code REF —...
  • Page 139 Tape Eject ......184 Scan Button ......185 Changing Tape Direction .

  • Page 140: Understanding Your Instrument Panel

    140 UNDERSTANDING YOUR INSTRUMENT PANEL Remote Sound System Controls — If Equipped ......196 Radio Operation ..... . 196 CD Player .

  • Page 141: Instrument Panel Features

    UNDERSTANDING YOUR INSTRUMENT PANEL 141 INSTRUMENT PANEL FEATURES...

  • Page 142: Instrument Cluster-Base

    142 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER—BASE...

  • Page 143: Instrument Cluster-Premium

    UNDERSTANDING YOUR INSTRUMENT PANEL 143 INSTRUMENT CLUSTER—PREMIUM...

  • Page 144: Instrument Cluster Descriptions

    144 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Reminder This is a reminder that the Fuel Filler Door is located on the left side of the vehicle.
  • Page 145 6. Low Fuel Light When the fuel level drops to 2 gallons, the fuel symbol will light and a single chime will sound. 7. Charging System Light This light shows the status of the electrical charging system. The light should come on briefly when the ignition switch is first turned ON and remain on briefly as a bulb check.
  • Page 146 146 UNDERSTANDING YOUR INSTRUMENT PANEL 12. Engine Temperature Warning Light This light warns of an overheated engine con- dition. If the engine is critically hot, a warning chime will sound 10 times. After the chime turns off, the engine will still be critically hot until the light goes out.
  • Page 147 off for 60 seconds when a system fault is detected. The flash cycle will repeat every ten minutes or until the fault condition is removed and reset. If this indicator comes on, the entire PRNDL/odometer display will brighten to FULL DAYTIME INTENSITY and will not be dimmable.
  • Page 148 148 UNDERSTANDING YOUR INSTRUMENT PANEL 16. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission control systems. The light will illuminate when the key is in the ON/RUN position before engine start. If the bulb does not come on when turning the key from OFF to ON/RUN, have the condition checked promptly.
  • Page 149 The light will come on when the ignition switch is first turned on and remain on briefly as a bulb check. This is normal. If the light does not come on during starting, have the system checked by an authorized dealer. 20.
  • Page 150 150 UNDERSTANDING YOUR INSTRUMENT PANEL When lit solid: There is an AWD system fault. AWD performance will be at a reduced level. Service the AWD system soon. When blinking: The AWD system is temporarily dis- abled due to overload condition. 25.
  • Page 151 indicated by the Brake Warning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until the cause is corrected. NOTE: The light may flash momentarily during sharp cornering maneuvers which change fluid level condi- tions.

  • Page 152: Electronic Vehicle Information Center (Evic) - If Equipped

    152 UNDERSTANDING YOUR INSTRUMENT PANEL 29. Electronic Vehicle Information Center Display—If Equipped When the appropriate conditions exist, this display shows the Electronic Vehicle Information Center (EVIC) messages. 30. Transmission Over Temp Light During sustained high speed driving on hot days, the automatic transaxle oil may be- come too hot.
  • Page 153 The Electronic Vehicle Information Center (EVIC) fea- tures a driver-interactive display. It is located in the lower left part of the cluster below the fuel and engine tem- perature gauge. The EVIC consists of the following: • System Status • Vehicle information warning message displays •...

  • Page 154: Evic Functions

    154 UNDERSTANDING YOUR INSTRUMENT PANEL • Headlamps On • Key In Ignition • Check TPM System EVIC Functions EVIC Button Press the EVIC button until one of the following func- tions are displayed on the EVIC: • Compass/Temperature/Audio • Average Fuel Economy •...

  • Page 155: Average Fuel Economy

    Average Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read “RESET” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel reading before the reset.
  • Page 156 156 UNDERSTANDING YOUR INSTRUMENT PANEL Language When in this display you may select different languages for all display nomenclature, including the trip functions. Pressing the EVIC button while in this display selects English, Espanol, Deutsch, Italiano, or Francais depend- ing on availability. As you continue the displayed infor- mation will be shown in the selected language.
  • Page 157 Flash Lights with Remote Key Lock When ON is selected, the front and rear turn signals will flash when the doors are locked or unlocked using the remote keyless entry transmitter. This feature may be selected with or without the sound horn on lock feature selected.

  • Page 158: Setting The Compass Variance And Compass Calibration

    158 UNDERSTANDING YOUR INSTRUMENT PANEL Confirmation of Voice Commands — If Equipped When ON is selected all voice commands from the U-Connect system are confirmed. Press and hold the EVIC button when in this display until “ON” or “OFF” appears to make your selection. Display English or Metric The EVIC, odometer, and navigation system units can be changed between English and Metric.
  • Page 159 UNDERSTANDING YOUR INSTRUMENT PANEL 159 To set the variance: with the ignition in the ON position, with a short button press (less than one second) press and release the EVIC button several times until you have displayed the Personal Settings (Customer Program- mable Features) menu.

  • Page 160: Compass Calibration

    160 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Calibration The Compass will automatically calibrate if the Cal indicator is flashing, by driving around slowly (under 5 mph / 8 km/h) in one or more complete circles in an area free from large metallic objects or power lines, until the Cal indicator turns off.

  • Page 161: Two Types Of Signals

    Two Types of Signals There are two basic types of radio signals... AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary... and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound.

  • Page 162: Clock Setting Procedure

    162 UNDERSTANDING YOUR INSTRUMENT PANEL Clock Setting Procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side Tune / Audio control. 3. After the hours are adjusted, press the right side Tune / Audio control to set the minutes.

  • Page 163: Operating Instructions - Radio Mode

    Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping.
  • Page 164 164 UNDERSTANDING YOUR INSTRUMENT PANEL (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. To stop the search, press SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button causes the tuner to scan through preset stations in either, AM, FM, or Satellite (if equipped) frequencies, pausing for 5 seconds at each preset station before continuing to the next.
  • Page 165 Press the rotary TUNE control a third time and TREB will display. Turn the TUNE control to the right or left to increase or decrease the Treble tones. Press the rotary TUNE control a fourth time and BAL will display. Turn the TUNE control to the right or left to adjust the sound level from the right or left side speakers.

  • Page 166: Operation Instructions - Cd Mode

    166 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up.

  • Page 167: Operation Instructions - Auxiliary Mode

    TIME Button (CD Mode) Press this button to change the display from elapsed CD playing time to time of day. The time of day will display for 5 seconds. RW/FF (CD Mode) Press and hold the FF (Fast Forward) and the CD player will begin to fast forward until FF is released.

  • Page 168: Operating Instructions - Hands Free Phone - If Equipped

    168 UNDERSTANDING YOUR INSTRUMENT PANEL MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound from the speakers. MUTE will display. Press the MUTE button a second time and the sound from the speakers will return. Rotating the volume control or turning OFF the ignition will also return the sound from the speakers.

  • Page 169: Sales Code Raq - Am/Fm/Cd (6-Disc) Radio With Optional Satellite Radio, Hands Free Phone, And Vehicle Entertainment Systems (Ves) Capabilities

    SALES CODE RAQ – AM/FM/CD (6-DISC) RADIO WITH OPTIONAL SATELLITE RADIO, HANDS FREE PHONE, AND VEHICLE ENTERTAINMENT SYSTEMS (VES) CAPABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. RAQ Radio UNDERSTANDING YOUR INSTRUMENT PANEL 169 Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
  • Page 170 170 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Button (Radio Mode) Press and release the SEEK button to search for the next listenable station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down. The radio will remain tuned to the new station until you make another selec- tion.
  • Page 171 5. To exit, press any button/knob or wait 5 seconds. RW/FF (Radio Mode) Pressing the rewind/fast forward button causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM, FM or Satel- lite (if equipped) frequencies.
  • Page 172 172 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the PTY button to select the following format types: 16 Digit-Character Dis- Program Type No program type or un- defined Adult Hits Alert Alert Classical Classic Rock College Country Emergency Test Foreign Language Foreign_Language Information Jazz News...

  • Page 173: Operation Instructions - (Cd Mode For Cd Audio Play)

    SET/DIR Button (Radio Mode) — To Set the Push-Button Memory When you are receiving a station that you wish to commit to push-button memory, press the SET/DIR button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and press and release that button.

  • Page 174: Load/Eject Button (Cd Mode For Cd Audio Play)

    174 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. You may eject a disc with the radio OFF. If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc.
  • Page 175 Radio display will show LOADING DISC when the disc is loading, and “READING DISC” when the radio is reading the disc. LOAD / EJT - Eject Press the LOAD/ EJT button and the push- button with the corresponding number where the CD was loaded and the disc will unload and move to the entrance for easy removal.

  • Page 176: Notes On Playing Mp3 Files

    176 UNDERSTANDING YOUR INSTRUMENT PANEL Press the SEEK button to move to the next randomly selected track. Press and hold the FF button to fast forward through the tracks. Release the FF button to stop the fast forward feature. Press the RND button a second time to stop Random Play.
  • Page 177 writing are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems.

  • Page 178: Operation Instructions

    178 UNDERSTANDING YOUR INSTRUMENT PANEL Loading times for playback of MP3 files may be affected by the following: • Media - CD-RW media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs •...
  • Page 179 the radio will play the next CD after a 2 minute timeout. If the CD is removed and there are no other CD’s in the radio, the radio will remain in CD mode and display INSERT DISC” for 2 minutes. After 2 minutes the radio will go to the previous tuner mode.

  • Page 180: Sales Code Rak - Am/Fm/Cassette/Cd (6-Disc) Radio With Optional Satellite Radio, Hands Free Phone, Video, Mp3, And Wma Capabilities

    180 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Video Entertainment System (VES ) (If Equipped) Refer to separate Video Entertainment System (VES ) Guide. SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SATELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAPABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate.
  • Page 181 Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the volume control to the right increases the volume and to the left decreases it. When the audio system is turned on, the sound will be set at the same volume level as last played.
  • Page 182 182 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button (Radio Mode) Press the INFO button for an RBDS station (one with call letters displayed). The radio will return a Radio Text message broadcast (if available) from an FM station (FM mode only). RW/FF (Radio Mode) Pressing the rewind/fast forward button causes the tuner to search for the next frequency in the direction of the...
  • Page 183 within 5 seconds will allow the program format type to be selected. Many radio stations do not currently broad- cast PTY information. Turn the tune knob to select the following format types: 16 Digit-Character Dis- Program Type No program type or un- defined News Information...

  • Page 184: Operating Instructions - Tape Player

    184 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you have selected a PTY with the tune knob, simply pressing the tune button in will go directly to a “PTY seek”. Buttons 1 - 6 (Radio Mode) These buttons tune the Radio to the stations that you commit to push-button memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}.

  • Page 185: Scan Button

    Scan Button Press this button to play 10 seconds of each selection. Press the scan button a second time to cancel the feature. Changing Tape Direction If you wish to change the direction of tape travel (side being played), press Preset 6. The lighted arrow in the display window will show the new direction.

  • Page 186: Load/Eject Button (Cd Mode For Cd Audio Play)

    186 UNDERSTANDING YOUR INSTRUMENT PANEL Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only. The use of other sized discs may damage the CD player mechanism. You may eject a disc with the radio OFF. If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc.
  • Page 187 Radio display will show EJECTING DISC when the disc is being ejected and prompt the user to remove the disc. Press and hold the LOAD/EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded.

  • Page 188: Notes On Playing Mp3 Files

    188 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the FF button to fast forward through the tracks. Release the FF button to stop the fast forward feature. If the RW button is pressed, the current track will reverse to the beginning of the track and begin playing. Press the RND button a second time to stop Random Play.
  • Page 189 Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.

  • Page 190: Operation Instructions

    190 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the Disc at Once option before writing to the disc. Operation Instructions - (CD Mode for MP3 and WMA Audio Play) SEEK Button (CD Mode for MP3 and WMA Play) Pressing the right side of the SEEK button plays the next...
  • Page 191 INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls through the following TAG information: Song Title, Artist, File Name, and Folder Name (if avail- able). Press the INFO button once more to return to elapsed time priority mode.

  • Page 192: Sales Code Rec - Am/Fm/Cd (6-Disc) Radio With Navigation System

    192 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Video Entertainment System (VES) (If Equipped) Refer to separate “Video Entertainment System (VES) Guide.” SALES CODE REC — AM/FM/CD (6–DISC) RADIO WITH NAVIGATION SYSTEM REC Radio Satellite Navigation Radio with CD Player with MP3 Capability (REC) - combines a Global-Positioning System-based navigation system with an integrated color screen to provide maps, turn identification, selection...

  • Page 193: Satellite Radio - If Equipped

    SATELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio. This service offers over 100 channels of music, sports, news, entertainment, and programming for chil- dren, directly from its satellites and broadcasting studios.

  • Page 194: Selecting Satellite Mode In Ref, And Raq, Radios

    194 UNDERSTANDING YOUR INSTRUMENT PANEL simultaneously for 3 seconds. All twelve ESN/SID num- bers will be displayed. The radio will exit the ESN/SID mode when any other button is pushed, the ignition is turned OFF, or 5 minutes has passed since any button was pushed.

  • Page 195: Storing And Selecting Pre-Set Channels

    Storing and Selecting Pre-Set Channels In addition to the 12 AM and 12 FM pre-set stations, you may also commit 12 satellite stations to push button memory. These satellite channel pre-set stations will not erase any AM or FM pre-set memory stations. Follow the memory pre-set procedures that apply to your radio.

  • Page 196: Remote Sound System Controls - If Equipped

    196 UNDERSTANDING YOUR INSTRUMENT PANEL • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel.

  • Page 197: Cd Player

    CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track or to the beginning of the previous track if it is within one second after the current track begins to play.

  • Page 198: Radio Operation And Cellular Phones

    198 UNDERSTANDING YOUR INSTRUMENT PANEL RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
  • Page 199 The controls are as follows: Fan Control Use this control to regulate the amount of air forced through the system in any mode you select. The fan speed increases as you move the control to the right from the OFF position. Mode Control (Air Direction) The mode control allows you to choose from several pat-...
  • Page 200 200 UNDERSTANDING YOUR INSTRUMENT PANEL heat at the windshield. This setting is good for main- taining comfort while reducing moisture on the wind- shield. Defrost Air is directed through the windshield and side window demist outlets. Use this mode with maximum fan and temperature settings for best wind- shield and side window defrosting.
  • Page 201 Air Conditioning Use this button to engage the Air Conditioning. A lamp will illuminate when the Air Con- ditioning System is engaged. NOTE: The air conditioning compressor will not en- gage until the engine has been running for about 10 seconds.

  • Page 202: Air Filtration System - If Equipped

    202 UNDERSTANDING YOUR INSTRUMENT PANEL Circulation Control Use this button to choose be- tween outside air intake or recirculation of the air inside the vehicle. A lamp will illu- minate when you are in recir- culate mode. Only use the re- circulate mode to temporarily block out any outside odors, smoke, or dust and to cool the...

  • Page 203: Operating Tips

    UNDERSTANDING YOUR INSTRUMENT PANEL 203 Operating Tips...
  • Page 204 204 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Vehicle side windows tend to fog on the inside in mild rainy or humid weather. To clear the windows, set mode to the mix or defrost position. Direct the panel outlets toward the side windows. Do not use recirculate without A/C for long periods as fogging may occur.
  • Page 205 STARTING AND OPERATING CONTENTS Starting Procedures ....208 Automatic Transaxle ....208 Manual Transaxle .
  • Page 206 206 STARTING AND OPERATING Brake System ......219 Anti-Lock Brake System (ABS) — If Equipped ......220 Power Steering .
  • Page 207 Gasoline Engines ..... 248 Reformulated Gasoline ....249 Gasoline/Oxygenate Blends .

  • Page 208: 208 Starting And Operating

    208 STARTING AND OPERATING STARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.

  • Page 209: Extremely Cold Weather (Below 20°F Or 29°C)

    start within 15 seconds, turn the ignition switch to the “OFF” position, wait 10 to 15 seconds, then repeat the normal starting procedure. WARNING! Do not attempt to push or tow your vehicle to get it started. Vehicles equipped with an automatic trans- axle cannot be started this way.

  • Page 210: After Starting

    210 STARTING AND OPERATING CAUTION! To prevent damage to the starter, do not crank the engine for more than 15 seconds at a time. Wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up.

  • Page 211: Brake/Transmission Interlock System

    CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.

  • Page 212: Automatic Transaxle Ignition Interlock System

    212 STARTING AND OPERATING allows you to insert your finger to override the system. If this occurs obtain service as soon as possible. Automatic Transaxle Ignition Interlock System This system prevents the key from being removed unless the shift lever is in PARK. It also prevents shifting out of PARK unless the key is in the ACC or ON positions, and the brake pedal is depressed.

  • Page 213: Fuel Economy/Performance Operation Feature

    • When shifting into P (Park), firmly move the lever all the way forward until it stops. • Look at the shift indicator window on the console to ensure it is in the P (Park) position. • You must depress the brake pedal to move the shift lever out of the P (Park) position.

  • Page 214: Autostick - If Equipped

    214 STARTING AND OPERATING NOTE: After pushing beyond the detent (bump/step) and entering “maximum performance” mode, the CVT will no longer operate in the economy mode, but will increase the engine speed up to 6000 RPM. The engine speed will remain at this high RPM while the vehicle accelerates.

  • Page 215: Autostick General Information

    ratio. After Autostick is activated, the manual ratio selected is displayed in the transmission ratio display and tipping the lever to the (+) or (-) direction will cause an upshift or downshift by one ratio. Autostick is deactivated: • By holding the lever to (+) momentarily. •...

  • Page 216: Manual Transaxle Recommended Shift Speeds

    216 STARTING AND OPERATING Fully depress the clutch pedal before you shift gears. As you release the clutch pedal, lightly depress the accelera- tor pedal. 5 - Speed Shift Pattern Use each gear in numerical order - do not skip a gear. Be sure the transaxle is in FIRST gear, (not THIRD), when starting from a standing position.

  • Page 217: Downshifting

    Downshifting Proper downshifting will improve fuel economy and prolong engine life. CAUTION! If you skip more than one gear while downshifting or downshift at too high a vehicle speed, you could damage the engine, transmission, or clutch. To maintain a safe speed and prolong brake life, shift down to 2nd or 1st when descending a steep grade.

  • Page 218: Parking Brake

    218 STARTING AND OPERATING PARKING BRAKE When the parking brake is applied with the ignition on, the Brake Light in the instrument cluster will come on. NOTE: This light only shows that the parking brake is on. It does not show the degree of brake application. If the parking brake is applied while the vehicle is moving, a chime will sound to alert the driver.

  • Page 219: Brake System

    WARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the keys in the ignition. A child could operate power windows, other controls, or move the vehicle.

  • Page 220: Anti-Lock Brake System (Abs) - If Equipped

    220 STARTING AND OPERATING malfunction is caused by an internal leak, as the brake fluid in the master cylinder drops, the brake warning indicator will light. WARNING! Driving a vehicle with the brake light on is danger- ous. A significant decrease in braking performance or vehicle stability during braking may occur.
  • Page 221 WARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded. •...
  • Page 222 222 STARTING AND OPERATING ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow, gravel, bumps, railroad tracks, loose debris, or panic stops. You also may experience the following when the brake system goes into Anti-lock: •...

  • Page 223: Power Steering

    POWER STEERING The standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible to steer your vehicle.

  • Page 224: Driving On Slippery Surfaces

    224 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Acceleration Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the front wheels to pull errati- cally to the right or left. This phenomenon occurs when there is a difference in the surface traction under the front (driving) wheels.

  • Page 225: Tire Safety Information

    TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. STARTING AND OPERATING 225 • European Metric tire sizing is based on European design standards.
  • Page 226 226 STARTING AND OPERATING Tire Sizing Chart Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
  • Page 227 Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be achieved un- der specified operating conditions (i.e.

  • Page 228: Tire Identification Number (Tin)

    228 STARTING AND OPERATING Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.

  • Page 229: Tire Loading And Tire Pressure

    Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire Placard Location STARTING AND OPERATING 229 Tire and Loading Information Placard Tire and Loading Information This placard tells you important information about the:...
  • Page 230 230 STARTING AND OPERATING Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information”...
  • Page 231 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. NOTE: The following table shows examples on how to calculate total load, cargo/luggage, and towing capaci- ties of your vehicle with varying seating configurations STARTING AND OPERATING 231...
  • Page 232 232 STARTING AND OPERATING...

  • Page 233: Tires - General Information

    WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.

  • Page 234: Tire Inflation Pressures

    234 STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation, also increases tire rolling resistance and results in higher fuel consump- tion.
  • Page 235 CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressure.”...

  • Page 236: Radial-Ply Tires

    236 STARTING AND OPERATING WARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. You could have a serious accident. Don’t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).

  • Page 237: Limited Use Spare - If Equipped

    Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare. Do not install more than one compact spare tire/wheel on the vehicle at any given time. CAUTION! Because of the reduced ground clearance, do not take your vehicle through an automatic car wash with the...

  • Page 238: Tread Wear Indicators

    238 STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) for more than 30 seconds continuously when you are stuck, and don’t let anyone near a spinning wheel, no matter what the speed.

  • Page 239: Life Of Tire

    Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure.

  • Page 240: Alignment And Balance

    240 STARTING AND OPERATING WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.

  • Page 241: Tire Pressure Monitoring System (Tpms) - If Equipped

    TIRE PRESSURE MONITORING SYSTEM (TPMS) — IF EQUIPPED Base Tire Pressure Monitoring System (TPMS) Operation – If Equipped This is the Tire Pressure Monitoring System warn- ing indicator located in the instrument cluster. • The Tire Pressure Monitoring System (TPMS) will warn the driver of a low tire pressure based on the vehicle recommended cold placard pressure.

  • Page 242: Premium System - If Equipped

    242 STARTING AND OPERATING sufficiently low enough to turn ON the “Tire Pressure Monitoring Light”. Driving the vehicle may cause the tire pressure to rise to approximately 30 psi (207 kPa), but the “Tire Pressure Monitoring Light” will still be ON. In this situation, the “Tire Pressure Monitoring Light”...
  • Page 243 Low Tire Pressure Display Display Settings • Your system can be set to display pressure units in PSI, kPa, or BAR. NOTE: These display settings may not be available due to Regulatory Authorities. In this case, the display will only show approved units. STARTING AND OPERATING 243 NOTE: A low spare tire will not cause the Tire Pressure Monitoring Telltale Lamp to illuminate or the chime to...
  • Page 244 244 STARTING AND OPERATING The EVIC will display the “CHECK TPM SYSTEM” message for 3 seconds. This text message is then followed by a graphic, with “- -“ displayed for the pressure value indicating which of the Tire Pressure Monitoring Sen- sor(s) is not being received.
  • Page 245 “CHECK TPM SYSTEM” text message will be display in the EVIC, and the graphic display will have “- -“ in place of the pressure value of the spare tire location. Once the original road tire has been properly repaired, and put back onto the vehicle in place of the compact spare tire.

  • Page 246: General Information

    246 STARTING AND OPERATING NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure.

  • Page 247: Tire Chains

    TIRE CHAINS Due to limited clearance, tire chains are not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country require the use of snow tires during winter. Standard tires are of the all season type and satisfy this requirement as indicated by the M+S designation on the tire sidewall.

  • Page 248: Fuel Requirements

    248 STARTING AND OPERATING Follow the recommended tire rotation frequency for your type of driving found in the “Maintenance Schedules” Section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected before rotating. The suggested rotation method is the “forward-cross”...

  • Page 249: Reformulated Gasoline

    Reformulated Gasoline Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline”. Reformulated gasolines contain oxygenates, and are spe- cifically blended to reduce vehicle emissions and im- prove air quality. The manufacturer supports the use of reformulated gaso- lines.

  • Page 250: Materials Added To Fuel

    250 STARTING AND OPERATING content of gasoline may not be indicated on the pump, you should ask your gasoline retailer whether or not his/her gasoline contains MMT. It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States.

  • Page 251: Carbon Monoxide Warnings

    • The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer.

  • Page 252: Adding Fuel

    252 STARTING AND OPERATING ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is behind the fuel filler door, on the left rear quarter panel of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.

  • Page 253: Loose Fuel Filler Cap Message

    WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regulations and will cause the malfunction indi- cator light to turn on.

  • Page 254: Vehicle Loading

    254 STARTING AND OPERATING CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. WARNING! • Never add fuel when the engine is running. •...

  • Page 255: Trailer Towing

    TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer carefully re- view this information to tow your load as efficiently and safely as possible.

  • Page 256: Trailer Hitch Classification

    256 STARTING AND OPERATING WARNING! It is important that you do not exceed the maximum front or rear GAWR. A dangerous driving condition can result if either rating is exceeded. You could lose control of the vehicle and have an accident. Tongue Weight (TW) The downward force exerted on the hitch ball by the trailer.

  • Page 257: Trailer Towing Weights (Maximum Trailer Weight Ratings)

    Trailer Hitch Classification Class Max. GTW (Gross Trailer Wt.) Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium 3,500 lbs (1587 kg) Duty Class III - Heavy Duty 5,000 lbs (2268 kg) Class IV - Extra 10,000 lbs (4540 kg) Heavy Duty Engine/Transmission...

  • Page 258: Trailer And Tongue Weight

    258 STARTING AND OPERATING Note 1 – The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to the Tire– Safety Information Section in this manual.

  • Page 259: Towing Requirements

    must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information plac- ard in the Tire Safety Information Section of this manual for the maximum combined weight of occupants and cargo for your vehicle. Towing Requirements To promote proper break-in of your new vehicle driv- etrain components the following guidelines are recom-...
  • Page 260 260 STARTING AND OPERATING • Vehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. With a manual transmission, shift the transmission into reverse.
  • Page 261 Towing Requirements — Trailer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury. − An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes.
  • Page 262 262 STARTING AND OPERATING Towing Requirements — Trailer Lights & Wiring Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a 4 and 7 pin wiring harness.

  • Page 263: Towing Tips

    7- Pin Connector Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage.

  • Page 264: Recreational Towing (Behind Motorhome, Etc.)

    264 STARTING AND OPERATING − Refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle (Flat towing with all four wheels on the ground) CAUTION! DO NOT FLAT TOW any continuously variable AUTOMATIC TRANSAXLE (CVT) equipped ve-...
  • Page 265 WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....266 If Your Engine Overheats ....266 Automatic Transaxle Overheating .

  • Page 266: 266 What To Do In Emergencies

    266 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER Hazard Warning Flasher The flasher switch is located on the instrument panel, below the radio. Depress the switch and both cluster indicators and all front and rear directional signals will flash. Depress the switch again to turn Hazard Warning Flashers off.

  • Page 267: Automatic Transaxle Overheating

    removes this heat. You can also turn the Temperature control to maximum heat, the Mode control to floor, and the fan control to High. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system.

  • Page 268: Jacking And Tire Changing

    268 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.

  • Page 269: Preparations For Jacking

    Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in PARK (automatic transaxle) or REVERSE (manual transaxle). Turn OFF the ignition. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic.
  • Page 270 270 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in step 3. 3. There are two front jacking locations and two rear jacking locations on each side of the body. The front locations are outlined by two triangular cutouts, the rear ones by two rectangular cutouts.
  • Page 271 WARNING! To avoid possible personal injury, handle the wheel covers with care to avoid contact with any sharp edges. NOTE: The wheel cover is held on the wheel by the wheel nuts. When reinstalling original wheel, properly align the wheel cover to the valve stem, place the wheel cover onto the wheel, then install the wheel nuts.

  • Page 272: Jump-Starting Procedures Due To A Low Battery

    272 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES DUE TO A LOW BATTERY WARNING! Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be hurt by the fan. WARNING! Do not attempt to push or tow your vehicle to get it started.
  • Page 273 3. Turn off the heater, radio and all unnecessary electrical loads. 4. Remove the air intake duct covering the battery, using the two finger screws on the cover. 5. Connect one end of a jumper cable to the positive terminal of the booster battery. Connect the other end of the jumper cable to the positive terminal of the dis- charged battery.

  • Page 274: Freeing A Stuck Vehicle

    274 WHAT TO DO IN EMERGENCIES 8. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes, then start the engine in the vehicle with the discharged battery. 9. When removing the jumper cables, reverse the se- quence exactly.

  • Page 275: Towing A Disabled Vehicle

    TOWING A DISABLED VEHICLE With Ignition Key Automatic And Manual Transaxle Front-wheel-drive vehicles must have the front wheels elevated; all-wheel-drive vehicles must be hauled on a flatbed truck. WHAT TO DO IN EMERGENCIES 275 All Transaxles CAUTION! If the vehicle being towed requires steering, the ignition switch must be in the ACCESSORY posi- tion, not in the LOCK position.

  • Page 276: Without The Ignition Key

    276 WHAT TO DO IN EMERGENCIES Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK position. A dolly should be used under the front wheels if the rear wheels are raised. Proper towing equipment is necessary to prevent dam- age to the vehicle.

  • Page 277: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — Gasoline Engines . . . 279 Onboard Diagnostic System — OBD II ..280 Loose Fuel Filler Cap Message ... . 280 Emissions Inspection And Maintenance Programs .
  • Page 278 278 MAINTAINING YOUR VEHICLE Cooling System ..... . . 294 Hoses And Vacuum/Vapor Harnesses ..298 Fuel System Connections .

  • Page 279: Engine Compartment - Gasoline Engines

    MAINTAINING YOUR VEHICLE 279 ENGINE COMPARTMENT — GASOLINE ENGINES...

  • Page 280: Maintaining Your Vehicle

    280 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems are oper- ating properly, your vehicle will provide excellent per- formance and fuel economy, as well as engine emissions well within current government regulations.

  • Page 281: Emissions Inspection And Maintenance Programs

    This might indicate a damaged cap. If the problem is detected twice in a row, the system will turn on the Malfunction Indicator Light (MIL). Resolving the prob- lem will turn the MIL light off. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requirement to pass an inspection of your vehicle’s emissions control system.

  • Page 282: Replacement Parts

    282 MAINTAINING YOUR VEHICLE b. The MIL will not flash at all and will remain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is ready and you can proceed to the I/M station.

  • Page 283: Maintenance Procedures

    WARNING! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
  • Page 284 284 MAINTAINING YOUR VEHICLE The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off. Do not check oil level before starting the engine after it has sat overnight. Checking engine oil level when the engine is cold will give you an incorrect reading.
  • Page 285 • Trailer towing. • Taxi, Police or delivery service (commercial service). • Off-Road or desert operation. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow schedule “B—All Engines”...

  • Page 286: Drive Belt - Check Condition

    286 MAINTAINING YOUR VEHICLE such a product, use only those oils that are American Petroleum Institute (API) Certified and have the recom- mended SAE viscosity grade. Follow the maintenance schedule that describes your driving type. Materials Added To Engine Oils The manufacture strongly recommends against the addi- tion of any additives (other than leak detection dyes) to the engine oil.

  • Page 287: Catalytic Converter

    plug. Refer to the Engine data Label located under the hood for the proper type of spark plug for use in your vehicle. Catalytic Converter The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device.

  • Page 288: Crankcase Emission Control System

    288 MAINTAINING YOUR VEHICLE In unusual situations involving grossly malfunctioning engine operation, a scorching odor may suggest severe and abnormal catalyst overheating. If this occurs, stop the vehicle, turn off the engine and allow it to cool. Service, including a tune up to manufacturers specifica- tions, should be obtained immediately.

  • Page 289: Maintenance-Free Battery

    WARNING! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air cleaner removed.

  • Page 290: Air Conditioner Maintenance

    290 MAINTAINING YOUR VEHICLE CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and identified on the battery case.

  • Page 291: Power Steering - Fluid Check

    Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar- bon (HFC) that is endorsed by the Environmental Pro- tection Agency and is an ozone-saving product. How- ever, the manufacturer recommends that air conditioning service be performed by dealers or other service facilities using recovery and recycling equipment.

  • Page 292: Body Lubrication

    292 MAINTAINING YOUR VEHICLE Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, liftgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear. Prior to the appli- cation of any lubricant, the parts concerned should be wiped clean to remove dust and grit;...

  • Page 293: Exhaust System

    checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze). Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system, or if exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged;...

  • Page 294: Cooling System

    294 MAINTAINING YOUR VEHICLE Cooling System WARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
  • Page 295 CAUTION! Mixing of coolants other than specified Hybrid Or- ganic Additive Technology (HOAT) engine coolants, may result in engine damage and may decrease corrosion protection. If a non-HOAT coolant is intro- duced into the cooling system in an emergency, it should be replaced with the specified coolant as soon as possible.
  • Page 296 296 MAINTAINING YOUR VEHICLE Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where the vehicle is operated. NOTE: Mixing coolant types will decrease the life of the engine coolant and will require more frequent coolant changes.
  • Page 297 ground. If ingested by a child, contact a physician immediately. Clean up any ground spills immediately. Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. With the engine idling and warm to normal operating tempera- ture, the level of the coolant in the bottle should be between the “ADD”...

  • Page 298: Hoses And Vacuum/Vapor Harnesses

    298 MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also.
  • Page 299 WARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You wouldn’t have your full braking capacity in an emergency.
  • Page 300 300 MAINTAINING YOUR VEHICLE Brake Master Cylinder The fluid level in the master cylinder should be checked when performing under hood services, or immediately if the brake system warning lamp is on. Be sure to clean the top of the master cylinder area before removing the cap.

  • Page 301: Automatic Transaxle (Cvt)

    WARNING! Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter. Do not allow petroleum based fluid to contaminate the brake fluid as seal damage will result! Automatic Transaxle (CVT)

  • Page 302: Manual Transaxle

    302 MAINTAINING YOUR VEHICLE Manual Transaxle Lubricant Selection Use only manufacturers recommended transmission fluid. Refer to Fluids, Lubricants and Genuine Parts for correct fluid type. Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more that 3/16”...

  • Page 303: Power Transfer Unit (Ptu) - Awd/4Wd Models Only

    Power Transfer Unit (PTU) – AWD/4WD Models Only Lubricant Selection Use only manufacturers recommended fluid. Refer to Fluids, Lubricants and Genuine Parts for correct fluid type. Fluid Level Check Visually inspected the unit at each oil change for leakage. If leakage is detected, Check the fluid level by removing the fill plug.
  • Page 304 304 MAINTAINING YOUR VEHICLE • Stone and gravel impact. • Insects, tree sap and tar. • Salt in the air near sea coast localities. • Atmospheric fallout/industrial pollutants. Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using Mopar Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
  • Page 305 • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. •...
  • Page 306 306 MAINTAINING YOUR VEHICLE Mopar Total Clean is specifically recommended for leather upholstery. Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth.

  • Page 307: Fuses/Integrated Power Module (Ipm)

    the elements. When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror. Instrument Panel Cover The instrument panel cover has a low glare surface which minimizes reflections in the windshield.
  • Page 308 308 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Fuse Fuse Empty Empty 15 Amp AWD/4WD ECU Lt. Blue Feed 10 Amp CHMSL Brake Switch Feed 10 Amp Ignition Switch Feed 20 Amp Trailer Tow Yellow 10 Amp IOD Sw/Pwr Mir/ Ocm Steering Cntrl Sdar/Hands Free Phone 30 Amp...
  • Page 309 Cavity Cartridge Mini Description Fuse Fuse 15 Amp IOD Feed Radio Lt. Blue 10 Amp IOD Feed Intrus Mod/Siren 10 Amp IGN RUN Heat/AC/ Compass Sensor 15 Amp ENG ASD Relay Feed Lt. Blue 15 Amp Power Sunroof Feed Lt. Blue 10 Amp Heated Mirror 15 Amp...

  • Page 310: Vehicle Storage

    310 MAINTAINING YOUR VEHICLE CAUTION! • When installing the Integrated Power Module cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in an electrical sys- tem failure.

  • Page 311: Bulb Replacement

    LIGHTS BULBS — Outside Low Beam/High Beam Headlight ... . H13 Front Park/Turn Signal/Side Marker Light ..... . . 3157NAK Front Fog Light .

  • Page 312: Tail Lights, Rear Turn Signals And Backup Lights - Replacement

    312 MAINTAINING YOUR VEHICLE Tail Lights, Rear Turn Signals And Backup Lights — Replacement 1. Remove the two push-pins from the tail light housing. Push-Pins Removed Removing Push-Pins...
  • Page 313 MAINTAINING YOUR VEHICLE 313 2. Grasp the taillamp and pull firmly to disengage the 3. Twist and remove socket from lamp. lamp from the aperture panel. Removing Socket and Bulb Pulling Lamp From Body...

  • Page 314: License Lights

    314 MAINTAINING YOUR VEHICLE 4. Remove bulb from socket and replace. Removing Bulb From Socket License Lights 1. Use a screw driver to gently pry against the side of the snap tab to remove the lamp from the liftgate. Prying Lamp from Liftgate...

  • Page 315: Center High-Mounted Stoplight

    MAINTAINING YOUR VEHICLE 315 2. Rotate the socket 1/4 turn counterclockwise. 3. Pull bulb from socket. Removing Socket from Lamp Removing Bulb From Socket Center High-Mounted Stoplight Light is an LED assembly. See your authorized dealer for replacement.

  • Page 316: Fluids And Capacities

    316 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Fuel (Approximate) Engine Oil-With Filter All Gasoline Engines (Use API Certified SAE 5W-20 Engine Oil.) Cooling System * Mopar Antifreeze/Coolant 5 Year/100,000 Miles Formula), or equivalent. * Includes heater and coolant recovery bottle filled to MAX level. U.S.

  • Page 317: Fluids, Lubricants And Genuine Parts

    FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or- ganic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-20 Engine Oil. Refer to your engine oil filler cap for correct SAE grade meeting DaimlerChrysler Material Standard MS-6395.

  • Page 318: Chassis

    318 MAINTAINING YOUR VEHICLE Chassis Component Automatic Transaxle (CVT) Fluid Manual Transaxle Fluid Rear Drive Assembly (RDA) Power Transfer Unit (PTU) Brake Master Cylinder Power Steering Reservoir Fluids, Lubricants and Genuine Parts. Mopar CVTF + 4 Mopar ATF+4 MS9602 Mopar Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent non- synthetic product.
  • Page 319 MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..320 Maintenance Schedules ....320 Schedule “B” ......323 Schedule “A”...

  • Page 320: Emission Control System Maintenance

    320 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.

  • Page 321: Maintenance Schedules 321

    NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first and follow schedule “B” of the Maintenance Schedules section of this manual. NOTE: If ANY of these apply to you then change your coolant every 102,000 miles (170 000 km) or 60 months, whichever comes first and follow schedule “B”...
  • Page 322 322 MAINTENANCE SCHEDULES • Check the fluid levels of coolant reservoir, brake/ clutch master cylinder, and manual transaxle and add as needed. • Check all lights and all other electrical items for correct operation. At Each Oil Change • Change the engine oil filter. •...

  • Page 323: Schedule "B" 323

    Schedule “B” Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures are below 32 °F (0 °C). • Stop and go driving. • Extensive engine idling. • Driving in dusty conditions. •...
  • Page 324 324 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, or at 3 months whichever comes first. Rotate tires. Check spare tire for proper pressure and correct stowage. Inspect engine air cleaner filter, replace if neces- sary. 3,000 6,000 9,000 (5 000 )
  • Page 325 Miles (Kilometers) Change engine oil and engine oil filter, or at 3 months whichever comes first. Rotate tires. Check spare tire for proper pressure and correct stowage. Inspect brake linings. Replace air cleaner filter. Replace spark plugs. Inspect PCV valve, replace as necessary.** 18,000 21,000 24,000...
  • Page 326 326 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, or at 3 months whichever comes first. Rotate tires. Check spare tire for proper pressure and correct stowage. Inspect brake linings. Inspect engine air cleaner filter, replace if neces- sary.
  • Page 327 Miles (Kilometers) Change engine oil and engine oil filter, or at 3 months whichever comes first. Change Automatic Transaxle (CVT) Fluid and Filter Change Manual Transaxle Fluid. Change Rear Drive Assembly (RDA) fluid. Change Power Transfer Unit (PTU) fluid. Rotate tires. Check spare tire for proper pressure and correct stowage.
  • Page 328 328 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, or at 3 months whichever comes first. Rotate tires. Check spare tire for proper pressure and correct stowage. Inspect brake linings. Inspect engine air cleaner filter, replace if neces- sary.
  • Page 329 Miles (Kilometers ) Change engine oil and engine oil filter, or at 3 months whichever comes first. Rotate tires. Check spare tire for proper pressure and correct stowage. Inspect brake linings. Replace engine air cleaner filter. Replace spark plugs. Inspect PCV valve, replace as necessary.** 78,000 81,000 84,000...
  • Page 330 330 SCHEDULE “B” Miles (Kilometers) Change engine oil and engine oil filter, or at 3 months whichever comes first. Change Manual Transaxle Fluid. Rotate tires. Check spare tire for proper pressure and correct stowage. Flush and replace engine coolant, if not done at 60 months.
  • Page 331 Miles (Kilometers) Change engine oil and engine oil filter, or at 3 months whichever comes first. Change Automatic Transaxle (CVT) Fluid and Filter Change Rear Drive Assembly (RDA) fluid. Change Power Transfer Unit (PTU) fluid. Rotate tires. Check spare tire for proper pressure and cor- rect stowage.

  • Page 332: Schedule "A

    332 SCHEDULE “A” Schedule “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Rotate tires. Check spare tire for proper pressure and correct stowage. Inspect brake linings. Inspect engine air cleaner filter, replace if neces- sary. Replace engine air cleaner filter. Replace spark plugs.
  • Page 333 Miles (Kilometers) [Months] Change engine oil and engine oil filter. Change Rear Drive Assembly (RDA) fluid. Change Power Transfer Unit (PTU) fluid. Rotate tires. Check spare tire for proper pressure and cor- rect stowage. Flush and replace engine coolant at 60 months, if not replaced at 102,000 miles (170 000 km).
  • Page 334 334 SCHEDULE “A” Miles (Kilometers) [Months] Change engine oil and engine oil filter. Rotate tires. Check spare tire for proper pressure and correct stowage. Inspect brake linings. Inspect engine air cleaner filter, replace if neces- sary. Replace engine air cleaner filter. Replace spark plugs.
  • Page 335 Miles (Kilometers) [Months] Change engine oil and engine oil filter. Change Rear Drive Assembly (RDA) fluid. Change Power Transfer Unit (PTU) fluid. Rotate tires. Check spare tire for proper pressure and correct stowage. Flush and replace engine coolant, if not done at 60 months.
  • Page 336 336 SCHEDULE “A” WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.

  • Page 337: If You Need Consumer Assistance

    IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle ..... . . 338 Prepare For The Appointment ... . 338 Prepare A List .

  • Page 338: Suggestions For Obtaining Service For Your Vehicle

    We want you to be happy with our products and services. Warranty service must be done by an authorized Chrysler, Dodge, or Jeep dealer. We strongly recommend that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.

  • Page 339: If You Need Consumer Assistance 339

    • If for some reason you are still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer’s Customer Center. Any communication to the Manufacturer’s Customer Center should include the following information: •...

  • Page 340: Warranty Information (U.s. Vehicles Only)

    340 IF YOU NEED CONSUMER ASSISTANCE Service Contract You may have purchased a service contract for your vehicle to help protect you from the high cost of unex- pected repairs after your manufacturer’s new vehicle limited warranty expires. The manufacturer stands be- hind only the manufacturer’s Service Contracts.

  • Page 341: Reporting Safety Defects

    REPORTING SAFETY DEFECTS In the 50 United States and Washington D.C.: If you believe that your vehicle has a defect, which could cause a crash or cause injury or death, you should immediately inform the National Highway Traffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer.

  • Page 342: Department Of Transportation Uniform Tire Quality Grades

    342 IF YOU NEED CONSUMER ASSISTANCE Corporation vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, dia- grams, and charts. • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and features.

  • Page 343: Treadwear

    Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled con- ditions on a specified government test course. For ex- ample, a tire graded 150 would wear one and a half (1 1/2) times as well on the government course as a tire graded 100.
  • Page 344 344 IF YOU NEED CONSUMER ASSISTANCE WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.

  • Page 345: Index

    INDEX...
  • Page 346 346 INDEX ABS (Anti-Lock Brake System) ... . . 220 Accelerator Pedal ..... . . 213 Adding Engine Coolant (Antifreeze) .
  • Page 347 B-Pillar Location ..... . . 229 Brake Assist System ..... 118 Brake Control System, Electronic .
  • Page 348 348 INDEX Child Restraint Tether Anchors Child Restraint with Automatic Belts ..56 Child Safety Locks ..... . . 18 Child Seat .
  • Page 349 Engine Oil ......286 Door Locks ......14 Door Locks, Automatic .
  • Page 350 350 INDEX Fabric Care ......305 Filler Location Fuel ..... 144 Filters Air Cleaner .
  • Page 351 Gasoline (Fuel) ..... 248,316 Gasoline, Reformulated ....249 Gauges Coolant Temperature .
  • Page 352 352 INDEX Intermittent Wipers (Delay Wipers) Introduction ......4 Jack Location ......268 Jack Operation .
  • Page 353 Oil Pressure ......145 Rear Fog ......152 Seat Belt Reminder .
  • Page 354 354 INDEX Navigation Radio ..... . . 192 Navigation System ..... . 192 New Vehicle Break-In Period .
  • Page 355 Sunroof ......122 Transfer Unit ......303 Windows .
  • Page 356 356 INDEX Safety Checks Inside Vehicle ....62 Safety Checks Outside Vehicle ....62 Safety Defects, Reporting .
  • Page 357 Snow Tires ......247 Spare Tire ..... . . 236,237,268 Spark Plugs .
  • Page 358 358 INDEX Flat Changing ......271 General Information ....233 High Speed .
  • Page 359 Transmitter Programming (Remote Keyless Entry) ....22 Transporting Pets ......60 Tread Wear Indicators .
  • Page 360 NOTES...

This manual is also suitable for:

2007 pm49 caliber

Table of Contents

Save PDF