320 STARTING AND OPERATING
Fuel Properties - No. 1 - Diesel
Carbon Residue - Less than.15%
Flash Point - 100°F min.
Density - 40-34 API gravity
Cloud Point - (- 30F°)
Active Sulfur
Copper Strip
Corrosion - #3 rating
ADDING FUEL (DIESEL ENGINES)
CAUTION!
To avoid fuel spillage and overfilling, do not "top
off" the fuel tank after filling.
NOTE:
Reference
• When the fuel nozzle "clicks" or shuts off, the fuel
(Ramsbottom
ASTM D-524
• Tighten the gas cap until you hear a "clicking" sound.
(ASTM D-93)
(ASTM D-287)
(ASTM D-97)
(ASTM D-130)
• Make sure that the gas cap is tightened each time the
A fire may result if fuel is pumped into a portable
container that is on a truck bed. You could be
burned. Always place fuel containers on the ground
while filling.
tank is full.
This is an indication that the gas cap is properly
tightened.
vehicle is refueled.
WARNING!