Connections - Onkyo C-7030 Instruction Manual

Instruction manual
Hide thumbs Also See for C-7030:
Table of Contents

Advertisement

Connecting the CD Player—Continued
Connections
With  (Remote Interactive) you can control the
C-7030 together with your other -compatible Onkyo
AV components. With some Onkyo AV receivers you
can use one remote controller to control all your Onkyo
components and use the following special  functions:
Direct Change
If your C-7030 is connected to an -compatible Onkyo
hi-fi amp or AV receiver, when you start playback on the
C-7030, the AV receiver will select the C-7030 as the
input source.
Remote Control Operation
You can control the C-7030 by using your Onkyo ampli-
fier's remote controller. See the amplifier's instruction
manual for details.
To use  you must make an analog audio connection
(RCA/phono) between the C-7030 and your other Onkyo
component even if they are connected digitally.
RCA/phono audio cable (supplied)
14
En-
Coaxial cable (not supplied)
 cable (supplied)
L
R
CD
Onkyo Hi-fi amp, AV receiver
To use the  functions, you need to connect one of the
C-7030's connectors to an connector on another
AV component in your system by using the supplied 
cable.
See the manuals supplied with your other -compati-
ble AV components for more information.
Notes:
• Use only cables for connections.
• The C-7030 has two connectors. You can connect
either one to your Onkyo hi-fi amp or AV receiver. The
other connector is for connecting additional -com-
patible components.
• Connect the C-7030's connector only to Onkyo
AV components. Connecting to other manufacturer's
AV components may cause them to malfunction.
• Some Onkyo -compatible AV components may not
support the special functions described here.
Disconnect the power
cord before making any

connections!

Coaxial IN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents