Event Log; Runtime Report - HP N1200 - StorageWorks Network Storage Router User's And Service Manual

Event Log

When this option is selected from the System Utilities menu, the Event Log menu is displayed (see
Figure 67).
Figure 67 Event log menu
X.XX.XX
1) Display event log
2) Clear event log
X) Return to previous menu
• Select 1 to display the event log.
• Select 2 to clear the event log of all old entries and start over with an empty list.
NOTE: Event logging captures over 2000 events and then starts overwriting the log when full; therefore,
the more types of events logged, the faster the log rolls over and overwrites events.

Runtime report

When this option is selected from the System Utilities menu, the Runtime Report prompt is displayed (see
Figure 68).
Figure 68 Runtime Report
To save the Report to a file, enable your terminal's 'CAPTURE text' mode.
To start the Report, press 'y' (any other key cancels the Report): y
(... report details appear here ...)
**********
The Report has been completed.
( Press any key to continue... )
The Runtime Report presents a consolidated listing of all system information, traces, and the event log.
86 Using the Command Line Interface
Event Log Menu
XXXXXX XXXXXXXXXXXXXXXX
07/7/2005 08:56:22
Runtime Report
X.XX.XX XXXXXX
07/7/2005
END of the Runtime Report
You may stop the file CAPTURE.
XXXXXXXXXXXXXXXX
08:56:22
**********