Attach The Outer Rail Assembly To The Rack - HP N1200 - StorageWorks Network Storage Router User's And Service Manual
4gb network storage router
Hide thumbs
Also See for N1200 - StorageWorks Network Storage Router:
- User manual (198 pages) ,
- Brochure (9 pages) ,
- Faq (34 pages)
Table of Contents
Advertisement
Attach the outer rail assembly to the rack
NOTE:
The size of the router and the rail assembly is 1U.
1.
Determine the correct rack location.
2.
Align the three screw holes on the front of the outer rail assembly with the front of the rack. All three
holes must be exactly aligned.
3.
With the outer rail assembly flush against the inside front of the rack, insert two 10-32 x 6 Phillips
screws, and tighten. Do not insert a screw in the center hole of the bracket.
Figure 5
Attaching the outer rail assembly to the rack
N1200-320 4Gb Network Storage Router user and service guide
15
Advertisement
Table of Contents
