Trace Settings Configuration - HP N1200 - StorageWorks Network Storage Router User's And Service Manual

NOTE: If a valid firmware or configuration file is uploaded to the network storage router, an automatic
reboot occurs once the file has been received. The network storage router cannot be accessed from the
Visual Manager UI during the time that the reboot is in process, which is approximately 30 seconds.

Trace settings configuration

This menu allows the configuration of Trace Settings (see
Figure 31 Trace settings configurations screen
To change the settings, use the drop-down boxes and choose the desired setting. After all changes are
completed, select Submit.
Table 5 Trace Settings
Setting
General Errors
FCP Transport
PS Transport
PS Driver
Timing
AF
Multi-Host Lib
SFP Diagnostics
FCP Driver
FCP Management
PS Management
SG List
FCP/RMI
52 Visual manager user interface
Table 5 is a brief description list of the trace settings.
Description
Displays the most serious error and exception conditions
Fibre Channel Protocol transport functionality is monitored and recorded
Parallel SCSI transport functionality is monitored and recorded
Parallel SCSI driver functionality is monitored and recorded
Timer functions are monitored and recorded
Active Fabric firmware is monitored and recorded
Debugging capability for Multi-host library features
Optical transceiver status is monitored and recorded
Fibre Channel Protocol driver functionality is monitored and recorded
Fibre Channel Protocol management functionality is monitored and recorded
Parallel SCSI functionality is monitored and recorded
Scatter/gather list is monitored and recorded
Fibre Channel Protocol routing layer is monitored and recorded
Figure 31).