Event Configuration - HP N1200 - StorageWorks Network Storage Router User's And Service Manual

If the Enter key is selected, the next page of trace levels appears as follows:
Figure 55 Trace settings
0) SG List
1) Timing
2) FCP/RMI
3) AF
4) INBAND
5) Multi-Host Lib
6) Queue Element
U) Update Current Operating Trace Levels
X) Return to previous menu
Enter the trace level index, <enter> for next page >
Enter a level number from the Trace Settings that are shown. This toggles the current setting to either ON or
OFF.
Select U to update current operating trace levels. This option forces the currently displayed trace settings to
become effective immediately, without requiring a reboot or power cycle.
NOTE: Be sure to set the clock and date in the Real-Time Clock Configuration menu so event logging is
accurate.

Event configuration

This option allows selecting the event threshold for filtering event logging. The asterisk denotes the current
setting.
Figure 56 Event filter settings
1) Disable Event Logging
2) Emergency events
3) Alert events
4) Critical events
5) Error events
U) Update Current Operating Trace Levels
X) Return to Previous menu
Enter event threshold <0-9> >
78 Using the Command Line Interface
Trace Settings
X.XX.XX XXXXXX
07/7/2005
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
: OFF
Event Filter Settings
X.XX.XX XXXXXX XXXXXXXXXXXXXXXX
07/7/2005 08:56:22
6) Warning events
7) Notify events
8) Info events
9) Debug events
0)* Log all events
XXXXXXXXXXXXXXXX
08:56:22