Current, Previous, And Last Assert Trace Displays; Clear Current Trace Buffer Or Assert Trace Buffer; Event Log Settings - HP N1200 - StorageWorks Network Storage Router User's And Service Manual

Table 5 Trace Settings
Setting
INBAND
Queue Element

Current, previous, and last assert trace displays

These three Utilities menu screens show trace information.
• The Current Traces screen shows data since the network storage router was last booted.
• The Previous Traces screen shows data from the last boot cycle.
• The Last Assert Traces screen shows data since the last assertion.
Trace buffers can be cleared by selecting either the Clear Current Traces option or the Clear Assert Traces
option.

Clear current trace buffer or assert trace buffer

Trace buffers can be cleared by selecting either the Clear Current Traces option or the Clear Assert Traces
option. When the Clear Current Traces option is selected, a confirmation message appears to verify the
selection. If a response of Yes is given, the unit clears the current trace buffer. Current network storage
router activities are not disrupted while the buffer is cleared. Select the Submit button to finalize your
choice.

Event log settings

The Event Log Settings screen is used to configure Event Log filters (see
Figure 32 Event Log settings screen
Event Log settings:
• Disable/Enable Logging
• Emergency Events
• Alert Events
• Critical Events
• Error Events
Description
Controller management functionality is monitored and recorded
Debugging capability for specific network storage router resources
N1200-320 4Gb Network Storage Router user and service guide
Figure 32).
53