Switch Operation; Main Switch; Headlight Position Lamp - DAELIM DAYSTAR Owner's Manual

SWITCH OPERATION

MAIN SWITCH

Main switch is used to turn on or turn off
engine.
Key
Function
position
Starts engine. Used
to operate vehicle
during day or night
ON
time, to operate
horn, winker, brake
lights or
lights.
Stops engine. Cuts
OFF
off all electrical
circuits.
12
CAUTION
Do not manipulate main switch key
Key
during operation. If the main switch
removal
key is placed on Off
position, all electrical system will
Cannot be
removed
not function. Never operate the
main switch key during travel as it
might cause unexpected accidents,
If it is necessary to remove the
head
main switch key, stop the vehicle
first prior to removing.
Can be
Prior to dismounting from the
removed
vehicle, make sure to lock the
steering wheel and remove key.
If the key is left in "ON" position
without starting engine, battery is
discharged.
Do not use a number of keys
together with a metal key holder.
The keys and the key holder may
cause scratches or other damage to
the cover while operating the
vehicle.(Recommend cloth or
leather key holders)

HEADLIGHT POSITION LAMP

<TURNING ON HEADLIGHT>
Put main switch key in "ON" position and
turn on headlight switch.
Switch position
or Lock
Position lamp
vehicle of the motor cycle position when
operating after sunset. In addition, when
the motor cycle is stopped at night or at
an intersection, the position lamp advises
other vehicles of the motorcycle
existence without blinding operators.
<HEADLIGHT HIGH OR LOW BEAM OPERATION>
High beam or low beam can be operated
by the use of high/low beam switch.
(HI) ... Headlight placed on high beam
(LO) ... Headlight placed on low beam
Switch position
Headlight, position lamp
and taillight turned on
Position lamp and
taillight turned on.
Light turned off
advises approaching