Starting The Engine - DAELIM DAYSTAR Owner's Manual

Hide thumbs Also See for DAYSTAR:
Table of Contents

Advertisement

STARTING THE ENGINE

<WHEN ENGINE IS COLD(WINTER)>
1. Verify the steering weel lock is released.
2. Make sure engine stop switch is in "
(RUN) position
3. Make sure fuel cock lever is in "ON"
position.
4. Turn on main switch.
5. Put gear in neutral.
(Verify this with neutral indicator lamp)
6. Open choke lever all the way.
7. open throttle grip approximately 1/8 and
press starter button.
8. Once engine is started, pull and release
throttle grip repeatedly to run engine
idle until engine is heated, and close
choke lever completely. If engine
warming up takes time, run engine idle
with the choke lever slightly closed.
9. Verify side stand is positively in
original position and start slowly.
18
"
<WHEN ENGINE IS HOT(SUMMER)>
1. Verify the steering wheel lock is released.
2. Make sure engine stop switch is in "
(RUN) position.
3. Make sure fuel cock lever is in "ON"
position.
4. Turn on main switch.
5. Put gear in neutral.(Verify this with
neutral indicator lamp)
6. Close throttle grip and press starter
button. (If engine is not started with 1-2
times of trial, verify fuel cock lever is in
"ON" position)
7. If engine is not started with throttle grip
closed, open throttle grip approximately
1/8 to 1/4 and press starter button.
8. Verify side stand is positively in
original position and start slowly.
"

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Daystar vl125l

Table of Contents