Checking The Power Injector Leds - Cisco AIR-AP1252AG-A-K9 Hardware Installation Manual

Checking the Power Injector LEDs

Checking the Power Injector LEDs
The power injector (model:AIR-PWRINJ4) has three LEDs on the top end of the case (see
Figure 4-2
AP POWER
Table 4-2
Regarding LED status colors, it is expected that there will be small variations in color intensity and hue
Note
from unit to unit. This is within the normal range of the LED manufacturer's specifications and is not a
defect.
Table 4-2
LED
AP Power
Fault
AC Power
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
4-6
Power Injector LEDs
FAULT AC POWER
lists the power injector LED indications.
Power Injector LED Indications
Color Description
Green Indicates DC power is available to the access point.
Red Indicates a short or overload condition. Check Ethernet cables and
connections before contacting your support organization for assistance.
Green Indicates AC power is available at the power injector.
Chapter 4 Troubleshooting 1250 Series Lightweight Access Points
Figure 4-2).
OL-8247-03