Using A Security Cable To Secure The Access Point - Cisco AIR-AP1252AG-A-K9 Hardware Installation Manual

Chapter 2 Installing the Access Point
Push the padlock against the side of the hole to lock the padlock.
Step 3
Rotate the padlock under the access point.
Step 4

Using a Security Cable to Secure the Access Point

You can secure the access point by installing a standard security cable (such as the Kensington Notebook
MicroSaver, model number 64068) into the access point security cable slot. The security cable can be used
with any of the mounting methods described in this guide.
To prevent the radio modules from being removed, you must install the mounting plate and a padlock.
Note
Follow these steps to install the security cable.
Loop the security cable around a nearby immovable object.
Step 1
Insert the key into the security cable lock.
Step 2
Insert the security cable latch into the security key slot on the side of the access point (see
Step 3
Rotate the key right or left to secure the security cable lock to the access point.
Step 4
Step 5 Remove the key from security cable lock.
OL-8247-03
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
Securing the Access Point
Figure 2-18).
2-29