Cisco AIR-AP1252AG-A-K9 Hardware Installation Manual page 65

Troubleshooting 1250 Series Autonomous
Access Points
This chapter provides troubleshooting procedures for basic problems with the 1250 series autonomous
access point (model: AIR-AP1252). For the most up-to-date, detailed troubleshooting information, refer
to the Cisco Technical Support and Documentation website at the following URL:
http://www.cisco.com/cisco/web/psa/default.html
Sections in this chapter include:
• Checking the Autonomous Access Point LEDs, page 3-2
• Checking Basic Settings, page 3-5
Low Power Condition on Autonomous Access Points, page 3-7
•
Running the Carrier Busy Test, page 3-16
•
Running the Ping Test, page 3-17
•
Resetting to the Default Configuration, page 3-18
•
Reloading the Access Point Image, page 3-19
•
Obtaining the Access Point Image File, page 3-22
•
Obtaining the TFTP Server Software, page 3-24
•
OL-8247-03
C H A P T E R
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
3
3-1